Works verry well. Now just 1 button for switching between RX/TX. And when i push the new button , after talking i can use the original PTT button on top of the screen to unlock PTT. ;) Thanks Steve 73

#ft-991a #macros #yaesu

Mac, can you connect two devices, such as a phone and laptop, to the Mumble server? Can they hear each other? --Howard

#mumble #ft-991a #audio #rss

Hi Mac, You can certainly update Mumble to the latest version. The latest Mumble client is 1.3. However, it is unlikely the problem you are seeing is caused by using an older version. Is receive audio

#ft-991a #rigpi #audio #rss #mumble

Yes and I have it working properly (most times). I do get SSB but after a while, it mutes. I can listen and work SSB for a few hours (through the RigPi). I can go back to VHF FM and scan that band and

#ft-991a

Yes turning up the volume on the rigpi display did help. It was probably in the manual somewhere but I missed it. Sorry for taking up the bandwidth. Thanks Nelson!

#ft-991a

...And ferrites are your friend! Perry K4PWO

#ft-991a

Howard, The heat issues with the PI 4B have been greatly reduced with firmware updates in the last 6 months. It was a USB firmware issue that caused much of the heating. Now is just CPU utilization th

#ft-991a #mumble

Nelson, This is Ray Webb. First I hope I you are the same Nelson Linkous I worked with at AEP, and second, what a great surprise to see your post about the RigPi. I was thinking of getting one of thos

#memory #mfj-1234 #ft-991a

Thanks, Howard. I'll dive a bit deeper and see what I can learn. I'll let you know if I figure it out. 73, Gary - WA6MEM

#audio #yaesu #ft-991a

If you have trouble changing to another radio on the same RigPi account, rebooting will fix any problems. —Howard

#ft-991a

HI Guys After reading a lot in here i have made a few macros for my FT991a These will switch the mike from frount to the back USB AUDIO *0w \0x65\0x78\0x31\0x30\0x36\0x31\0x3B\0x65\0x78\0x30\0x37\0x34

#ft-991a #macros

thanks for the info ill give it a go thanks Paul

#ftdx3000 #ft-991a

Perfect Now I need to adjust my audio output Too Bessie and a little muffled

#ft-991a

My bad... Sorry for the typo. Here is the code I am guessing you are using: { var cMeterVal=pmeter.getByName("Slider1"); var mtr1=Number(tAData[4])+54; mtr=mtr1/5.5; cMeterVal.setValue(mtr, true); var

#ft-991a #mfj-1234 #rigpi #reversed

You are going to need a RigPi image file and one preferably setup for a Yaesu 991A and then you will need a Windows computer with a card reader and this program "Win32DiskImager". You will place the n

#ft-991a

Maybe this post will help someone else. I learned that you need to convert macro ascii commands into hexadecimal ones for the Yaesu FT-991A https://groups.io/g/RigPi/message/3367

#ft-991a

Hi Mark, It's unclear where you are running into trouble with connecting to your radio. However, connecting to a radio and turning on rig control is covered in the menu selection RigPi>Help>RigPi Help

#ft-991a

Mark please be specific what you mean you are having trouble. step on would be to get the rigpi controlling the freq etc. are you able to control and tune freq and change bands with the rigpi locally?

#set #ft-991a

Hi Mark I am able to use all the bands on my FT991A using RigPi. 73 Mitch N0DIM

#ft-991a

Hi Georges, The connection to a Telnet spot site requires a valid amateur radio call, which is taken form the account’s user call. So you can use your call in the call sign field for your Guest accoun

#ft-991a #mfj-1234