|
#rigpi2 #mfj-1234 #fldigi #wsjt-x
#rigpi2
#mfj-1234
#fldigi
#wsjt-x
Sorry about that Andy. I was called away and when I got back, my cat was sitting on the keyboard. Totally locked up my session! To continue about the USB Identifier. I did as you suggested but what sh
Sorry about that Andy. I was called away and when I got back, my cat was sitting on the keyboard. Totally locked up my session! To continue about the USB Identifier. I did as you suggested but what sh
|
By
AlanHorvath
· #9515
·
|
|
#rigpi2 #mfj-1234 #fldigi #wsjt-x
#rigpi2
#mfj-1234
#fldigi
#wsjt-x
Hello Andy- Been doing some thinking, Youtubing, Reading the RigPi 2 Manual, whatever I can find. The only thing I'm trying to do is get my IC-746 talking to my Pi and controlling it. It did at one ti
Hello Andy- Been doing some thinking, Youtubing, Reading the RigPi 2 Manual, whatever I can find. The only thing I'm trying to do is get my IC-746 talking to my Pi and controlling it. It did at one ti
|
By
AlanHorvath
· #9514
·
|
|
#rigpi2 #mfj-1234 #fldigi #wsjt-x
#rigpi2
#mfj-1234
#fldigi
#wsjt-x
Alan, Going way out on a limb here. Are you running WSJT (or FLdigi) and then trying to connect using the Rig Pi application? If so, you have a resource conflict for the USB serial port where WJST is
Alan, Going way out on a limb here. Are you running WSJT (or FLdigi) and then trying to connect using the Rig Pi application? If so, you have a resource conflict for the USB serial port where WJST is
|
By
Andy
· #9498
·
|
|
#rigpi2 #mfj-1234 #fldigi #wsjt-x
#rigpi2
#mfj-1234
#fldigi
#wsjt-x
Hello All- This is the Error log I get when I hit Connect Radio button: 1/16/2022 WA3OXM RigPi Radio Settings 127.0.0.1/settingsAdvanced.php?x=Alan&c=WA3OXM# 1/1 TEST MODE Radio: 1 User: Alan Radio fr
Hello All- This is the Error log I get when I hit Connect Radio button: 1/16/2022 WA3OXM RigPi Radio Settings 127.0.0.1/settingsAdvanced.php?x=Alan&c=WA3OXM# 1/1 TEST MODE Radio: 1 User: Alan Radio fr
|
By
AlanHorvath
· #9496
·
|
|
#rigpi2 #mfj-1234 #fldigi #wsjt-x
#rigpi2
#mfj-1234
#fldigi
#wsjt-x
Good Evening All- I have been doing a lot of trouble shooting on my RigPi by following the manual procedures. One thing I found was the message "Rig Ctl not Started" when I Press the Test Radio button
Good Evening All- I have been doing a lot of trouble shooting on my RigPi by following the manual procedures. One thing I found was the message "Rig Ctl not Started" when I Press the Test Radio button
|
By
AlanHorvath
· #9469
·
|
|
#rigpi2 #mfj-1234 #fldigi #wsjt-x
#rigpi2
#mfj-1234
#fldigi
#wsjt-x
Alan, the Help file for the version you are using is included with RigPi and can be accessed through the Help menu. When using Fldigi or WSJT-X you can control the radio directly from that program or
Alan, the Help file for the version you are using is included with RigPi and can be accessed through the Help menu. When using Fldigi or WSJT-X you can control the radio directly from that program or
|
By
Howard Nurse, W6HN
· #9451
·
|
|
#rigpi2 #mfj-1234 #fldigi #wsjt-x
#rigpi2
#mfj-1234
#fldigi
#wsjt-x
I use a West Mountain Radio Rig Talk Serial interface . This is what shows up on my RPort "/dev/serial/by-id/usb-Silicon_Labs_WMR_RIGtalk_RT1_2493-if00-port0" "/dev/Radio1" shows up in the pull down l
I use a West Mountain Radio Rig Talk Serial interface . This is what shows up on my RPort "/dev/serial/by-id/usb-Silicon_Labs_WMR_RIGtalk_RT1_2493-if00-port0" "/dev/Radio1" shows up in the pull down l
|
By
Andy
· #9440
·
Edited
|
|
#rigpi2 #mfj-1234 #fldigi #wsjt-x
#rigpi2
#mfj-1234
#fldigi
#wsjt-x
Hello Again Andy- More about the problem I'm having: I still can't connect to the radio. I used the USB ID and I see the R Port is /dev/radio1 shown on the RigPi Advanced Setting page. One other thing
Hello Again Andy- More about the problem I'm having: I still can't connect to the radio. I used the USB ID and I see the R Port is /dev/radio1 shown on the RigPi Advanced Setting page. One other thing
|
By
AlanHorvath
· #9436
·
|
|
#rigpi2 #mfj-1234 #fldigi #wsjt-x
#rigpi2
#mfj-1234
#fldigi
#wsjt-x
Hi Alan, Just double checking ... correct radio info set ICOM IC746 Baud rate? Matches the rate set in the radio Default radio address in the radio should be set to 56 (Suggest leaving the setting in
Hi Alan, Just double checking ... correct radio info set ICOM IC746 Baud rate? Matches the rate set in the radio Default radio address in the radio should be set to 56 (Suggest leaving the setting in
|
By
Andy
· #9425
·
|
|
#rigpi2 #mfj-1234 #fldigi #wsjt-x
#rigpi2
#mfj-1234
#fldigi
#wsjt-x
Remember to “reboot” every time you make changes to the pi !!!! Good luck ! Tim Edmonson Area Partner-Ky Captain D’s-SPFS Inc. 270-978-1014 “We have to be able to count on each other doing what we hav
Remember to “reboot” every time you make changes to the pi !!!! Good luck ! Tim Edmonson Area Partner-Ky Captain D’s-SPFS Inc. 270-978-1014 “We have to be able to count on each other doing what we hav
|
By
Tim Edmonson
· #9424
·
|
|
#rigpi2 #mfj-1234 #fldigi #wsjt-x
#rigpi2
#mfj-1234
#fldigi
#wsjt-x
Hello Andy- I didn't think about USB ID. I followed the instructions in the RigPi manual and got that straightened out. Never was a problem before, now I know! On the RigPi Advanced Setting page, I se
Hello Andy- I didn't think about USB ID. I followed the instructions in the RigPi manual and got that straightened out. Never was a problem before, now I know! On the RigPi Advanced Setting page, I se
|
By
AlanHorvath
· #9423
·
|
|
#rigpi2 #mfj-1234 #fldigi #wsjt-x
#rigpi2
#mfj-1234
#fldigi
#wsjt-x
HI Alan, Sounds as though you were using FLdigi and WSJT connecting directly to the radio and not through the Rig Pi application. Did you use USB ID to define which usb device was controlling the radi
HI Alan, Sounds as though you were using FLdigi and WSJT connecting directly to the radio and not through the Rig Pi application. Did you use USB ID to define which usb device was controlling the radi
|
By
Andy
· #9421
·
|
|
#rigpi2 #mfj-1234 #fldigi #wsjt-x
#rigpi2
#mfj-1234
#fldigi
#wsjt-x
Help! I'm trying to get my mfj-1234 rigpi b working with the original os that came with it. The rig is an icom ic-746, rigpi with usb keyboard and mouse and hdmi monitor. Also, I use a valley usb to c
Help! I'm trying to get my mfj-1234 rigpi b working with the original os that came with it. The rig is an icom ic-746, rigpi with usb keyboard and mouse and hdmi monitor. Also, I use a valley usb to c
|
By
AlanHorvath
· #9420
·
|
|
Mumble can Co-exist with FLDigi & TS2000
#fldigi
#mumble
#ts2000
#audio
Closing Mumble and restarting before reboot makes the new setting stick. Thanks Howard.
Closing Mumble and restarting before reboot makes the new setting stick. Thanks Howard.
|
By
Don Melcher
· #6506
·
|
|
Mumble can Co-exist with FLDigi & TS2000
#fldigi
#mumble
#ts2000
#audio
Turns out the Mumble client on the RigPi reverts to the 1234 sound card after reboot. Have to figure out how to make that stick.
Turns out the Mumble client on the RigPi reverts to the 1234 sound card after reboot. Have to figure out how to make that stick.
|
By
Don Melcher
· #6504
·
|
|
Mumble can Co-exist with FLDigi & TS2000
#fldigi
#mumble
#ts2000
#audio
I just couldn’t handle operating digital modes without being able to listen to the RX audio if desired to check for interference, etc. So I added a USB sound card, set Mumble to use that sound card an
I just couldn’t handle operating digital modes without being able to listen to the RX audio if desired to check for interference, etc. So I added a USB sound card, set Mumble to use that sound card an
|
By
Don Melcher
· #6502
·
|
|
Kenwood TS-480SAT supported?
#cat
#fldigi
#kenwood
#remote
#wsjt-x
Sri Howard, I found TS-480 as number 228. Alf Den 8 apr. 2020 kl. 10:36, skrev Alf Blomqvist:
Sri Howard, I found TS-480 as number 228. Alf Den 8 apr. 2020 kl. 10:36, skrev Alf Blomqvist:
|
By
...
· #5312
·
|
|
Kenwood TS-480SAT supported?
#cat
#fldigi
#kenwood
#remote
#wsjt-x
Hi Howard and thank you for the list. Kenwood TS-480SAT/HX are not on the list - will they be supported in the future? Icom IC-735 is there so I maybe could use a RigPi for it. Alf Den 8 apr. 2020 kl.
Hi Howard and thank you for the list. Kenwood TS-480SAT/HX are not on the list - will they be supported in the future? Icom IC-735 is there so I maybe could use a RigPi for it. Alf Den 8 apr. 2020 kl.
|
By
...
· #5311
·
|
|
Kenwood TS-480SAT supported?
#cat
#fldigi
#kenwood
#remote
#wsjt-x
Hi Alf, Here is a PDF file containing a list of all supported radios: https://groups.io/g/RigPi/files/RigPi%20Documentation/Hamlib%20Radio%20List%205-7-19.pdf --Howard
Hi Alf, Here is a PDF file containing a list of all supported radios: https://groups.io/g/RigPi/files/RigPi%20Documentation/Hamlib%20Radio%20List%205-7-19.pdf --Howard
|
By
Howard Nurse, W6HN
· #5309
·
|
|
Kenwood TS-480SAT supported?
#cat
#fldigi
#kenwood
#remote
#wsjt-x
Hi, is there a list of supported transceivers somewhere? 73 de Alf OH6IH
Hi, is there a list of supported transceivers somewhere? 73 de Alf OH6IH
|
By
...
· #5306
·
|