Hi Lucas, 1.) have you opened Mumble’s port address on your router (port forewarning)? You should open your router external port 64738 and tie that port to your RigPi’s IP address. Save the changes. 2

#ic-7300 #vnc #commands

Hello, So far I can connect wifi the mumble server but how use it over the internet? I try ip address Pi and also Lan and open ports could not open a connection to the host Pls explain more!

#ic-7300 #vnc #commands

Hello, Can you tell me how to setting up this Mumble server correct??? It is much work to do correct way. settings and also use by internet. If I follow the steps video at YouTube I not have any hotsp

#ic-7300 #vnc #commands

Hello.. Mumble port is 64738 unless you have changed it. Also you might not wish to tell everyone what your router wan IP is for security reasons. Good luck

#ic-7300 #vnc #commands

Hello , Lanip is now 192.168.1.5 and wan op xx.xx.xx.xx port 30001 must be. That filling for mumble? Verzonden via Yahoo Mail op Android

#ic-7300 #vnc #commands

Hello Howard, For the router not easy guess for you. AIS Fiber Mesh Wi-Fi Router This one from the AIS home cable internet. I known where put the port forwarding settings. Mumble can startup at raspbe

#ic-7300 #vnc #commands

Hi Lucas, Can you tell us the make and model of your router so I can give you specific help? Is Mumble working on your local network? What radio are you using? (Edit: I see you are using an iC-7300 fr

#ic-7300 #vnc #commands

Hello Howard, I seen a video about you for the Mumble. Right now I connect the radio over the internet also VNC server. It only the Mumble server it need setup. I have the latest rigpi order before MF

#ic-7300 #vnc #commands

Hi Lucas, 1. Please give us more information. Do you see any error messages when you try to log in to the Mumble server? 2. VNC Server is started when the Raspberry Pi boots. You can reboot RigPi usin

#ic-7300 #vnc #commands

Hello, First about connect local server to mumble I cannot get it work! Can somebody tell me the correct steps or maybe really help me over remote pc? I only weekend at radio and other days 60 km away

#ic-7300 #vnc #commands

I was able to figure it out by looking at other posts. The macro is *0w \0x41\0x43\0x30\0x30\0x32\0x3b

#ftdx3000 #rss #commands

I am needing help in what macros to use in the RSS to utilize the internal tuner of the FTDX 3000 radio.

#ftdx3000 #rss #commands

Sorry, it only the update page the login is still on error Wolfgang Wo4sun

#corrupt #commands

thank you Howard, after 3 attempt the home page shows up. I try to find the solution for my problem and let you know if everything is ok Wolfgang

#corrupt #commands

Thank you for fast respond, both not working. 1 chance is a loop again and the second is #1045 Access denied for user phpmyadmin(using password: YES) YES shows the same error Wolfgang Wo4sun

#corrupt #commands

Please try username ham, password 7388, to see if that works. If not, try username phpmyadmin, password 7388. --Howard

#corrupt #commands

Hi there, I have a new unit and try to get it running. I can not start rigpi anymore after I put my call sign and password in it. I read in our forum I have to go to PHPMyAdmin and correct it. When I

#corrupt #commands

Howard - increased Macros varchar(2000) to (5000) via phpMyAdmin. Let’s see if it cures macro dump problem. Have noticed a 2-5 second loading delay from initial appearance “stock” macros to my custom

#commands #rigpi #macros #macro

On Mon, Jun 29, 2020 at 10:01 PM, Howard Nurse, W6HN wrote: Steve, while you are in there, open the structure view of the table and increase the size of the Macro field from 2000 to 5000. --Howard

#commands #rigpi #macros #macro

Steve, please send the contents of the Macro field from the RadioInterface table to me by private email. Also include the macros you are trying to enter in 31 and 32. I’ll test here. —Howard

#commands #rigpi #macros #macro