OK while working on this problem... and at a point when I was doing nothing... The computer audio started being received by the Mumble server. Out of the Blue... Android still acting like it is sendin

#audio #ft-991a #mumble #rigpi #rss

Dear all I am having an issue configuring RigPi2 on a RPi4 (4GB) with a SignaLink. Basically, I’m not getting any audio out. Points of note: 1) From the speaker icon on the top right panel, there is n

#alsamixer #audio #mumble

Never really had RigPi working correctly since I had it for over a year. I have been testing the TX audio on 2 Meters. My TX audio is very lite. After I TX my audio echoes three times. The RX Audio se

#audio #mumble #icom

The din plug is going in correctly, I have always been careful with those so I wouldn't bend anything. If I connect the RJ45 to the RSS with the 2000 turned off, and then power it up the radio doesn't

#audio

Hi Paul Is mumble on your pc connecting OK? 73 Glenn VE9GJ

#ic-7300 #audio

How do I hook up My MFJ1234 to a IC 7700 Eddie WK4I

#audio

Got it working. Used the Rigpi settings and mumble setting from this page. http://ve7ed.com/rigpi.html After it all appeared to be connected I did the cycle of self-mute self-deafen and the un-mute/de

#audio

Hello Howerd just I have test the K3 funkion 100 % it works direkt with FT8 later I test the IC7300 73 Peter

#audio #rigpi

OM, if your transmit audio is too hot and your transmit audio is distorted (which is what I assume you mean by "too loud"), the way to fix that is by adjusting the audio level with Alsamixer (availabl

#audio

Closing Mumble and restarting before reboot makes the new setting stick. Thanks Howard.

#fldigi #mumble #ts2000 #audio

Aloha Steve, Thanks for your comments. I'm glad to be of service in getting your Dad on the air again. All my comments are "open source". If it's of any help to others, by all means please pass it alo

#audio

Thank you, Dan.

#audio

Mac, can you connect two devices, such as a phone and laptop, to the Mumble server? Can they hear each other? --Howard

#mumble #ft-991a #audio #rss

Hi Mac, You can certainly update Mumble to the latest version. The latest Mumble client is 1.3. However, it is unlikely the problem you are seeing is caused by using an older version. Is receive audio

#ft-991a #rigpi #audio #rss #mumble

Ok, so would one have to set the macro buttons to one level of adjustment ( ie different filter bandwidth buttons) instead of a slider ? Is there a way to add a slider or dial to adjust these settings

#mfj-1234 #yaesu #rigpi #audio #commands

thanks for all the input! I have a verizon fios modem , which come to find out is very finnicky with port forwarding. I had to designate the Rigpi as a dmz server in order to allow mumble to connect r

#audio #mumble

Thanks, Steve. We’re getting close to the new RigPi release (once Hamlib 4 is released) and all Help files will be updated. The latest Help is always available in RigPi through the Help menu for other

#audio #noob

Hi Steve (ke4lc), I just went through similar issues as you are describing. If you look in the RigPi Help files online (launch help from the RSS menu), you may notice in the sound section they have ch

#audio #multiple #rigpi

Howard, FYI, fldigi is now working fine after a recompile from source. -Blaine

#audio

Hi Kevin, The noise could be coming from several places. Here are some things to try. Make sure the noise suppression slider is all the way to the left in Mumble>Configure>Settings>Audio In. Use the “

#audio #kenwood