Can anyone help? I have a few issues trying to set up the Rigpi. 1). I can see FT8 decoding using sysdefault:CARD=CODEC. I can control the radio but if I hit "tune" radio goes into transmit mode but n

Today I was able to get audio input into the FTdx3000 digital FT8 mode. Here is what I had to do to get it to work. This may help someone else. 1) logged into Pi desktop with keyboard, mouse and monit

Russ, I have the FTdx3k also and did setup 2 macros to toggle from Front (P2=0) to USB (P2=2). Front is EX1030 (*0w \0x45\0x58\0x31\0x30\0x33\0x30\0x3b) for USB EX1032) (*0w \0x45\0x58\0x31\0x30\0x33\

I have a FTdx3k and FTdx5k. I have the 3k set up in Rigpi. When I set up the 5k under a different account and log in, the same tuner display with the 3k spelled out appears. I cannot get the 5k tuner

With windows, my Yaesu FTdx3000 or FTdx5000 with SCU-17 requires a special driver (CP210) which creates the USB to UART Bridge (1 enhanced and 1 regular com port). Here is what happens in my RSS. 1) B

Darren, I do have the radio connected to my desktop but I am using 2 usb switches, 1 for connecting the keyboard/mouse to either the RSS or desktop and 1 to switch the radio between the RSS and deskto

Thank you Howard for your quick response. I knew it was trying to use the same com port but did not know how to get around that. Your recommendation worked. Thank you. Just a note: I use a wifi smart

Update: disregard last part of email about having to use 2 wifi plugs. Radio does turn on but seems to take a long time, 30 to 60 sec. All is ok. Garry Chessen Sent from Mail for Windows 10

I ran some more testing because I needed to be able to remotely cut power to FTdx3000 radio as well as RSS. I have determined if power is applied to both radio power supply and RSS at the same time, R

Can anyone help. I did an update and full upgrade today. When I rebooted I lost the wireless interface and receive a message “connection to dhcpcd lost” I do not use the wifi portion as I am using the

For some unknown reason my Rigpi has lost connection to internet. VNC says "VNC Server-Service Mode. I have the Rigpi connected thru an ethernet cable to a 4 port sw to the extender (Linksys RE6800).

#rss

Thanks Howard for getting back to me. I will try that tonight. I did put the original SD card in to see if that helped. Still the same. I would have thought if Ethernet was workin g I could access the

#rss

Howard, I connected direct to router. No connection still. Here is pic of lights.

#rss

I took my Rigpi to my son-in-laws house and tried to connect to his wifi. Rigpi said it was associated with the wifi with a green check on router name but the wifi symbol continually cycled and I coul

#rss

I took my Rigpi to my son-in-laws house and tried to connect to his wifi. Rigpi said it was associated with the wifi with a green check on router name but the wifi symbol continually cycled and I coul

#rss

Howard here is photo

#rss

Glenn, the SD card is a 64 gb. It is only at 9.4 gb used.

#rss

Howard, I unplugged the Ethernet cable. I did not reboot but still shows 192.168.1.75. Tried ping in cod window on desktop connected to same extender. Ping timed out.

#rss

Howard see pic

#rss

Howard, I installed the 16 gb card. Same results. Ping times out. Command dmesg | grep eth0 has same result as 64 gb card.

#rss