WILL XIEGU G90 WORK FULLY REMOTE WITH RIG PI THANKS ROB AB2LO

Is there any reason there isn’t a band button for 70 & 23 CM bands on the screen of v2 of RSS? I was hoping it was an oversight that would be corrected in v2.

#ts2000

Most VHF/UHF FM transceivers don’t support CAT control with a few exceptions mentioned in past posts to the group. When you add DMR capability the choices get small or none existent. It’s possible tha

Good question. I have an ALINCO DJ-MD5 w/ DMR and want to know how to get it to work with the new Rigpi version 2.0. Kevin, KJ7EHQ

Hi all, Does anyone know of a radio that is suitable for DMR that will work and be controlled by RigPi? 73's Dave

Hello All, WSJT-X crashes when trying to PTT my XIEGU G1M radio. The basic RigPi software appears to operate correctly. This issue only affects WSJT-X. -Radio: XIEGU G1M radio -RigPi radio selected: X

So I got ssb to work perfectly ! Now the kicker how do I get the mfj1234 to key the rig to do cw.. I did the test and it did the...- that part works ..the test... ... Now how do I get the rig to key w

Thanks all, I am fairly familiar with Python so the System commands sounds like what are may be looking for. 73's Thank you. Mike WA3O

Python is your friend for GPIO… just Web search for “RPi GPIO Python Example” and you’ll get many example scripts. Perry – K4PWO

Hi Mike I have not used it myself but you can set Macros to trigger system commands. See the section on System Commands in the help. You would write your own simple executables using python (or others

OK Tom in that case just plug the usb cable from the Signalink into the RigPi and leave the existing Signalink to FT-920 connections as is. In WSJT audio your Signalink will be listed as USB Codec. Sa

Hi Mike, RigPi currently supports three ways of switching external devices. Two of them are through a USB port and the third is by using the PTT line from the CW Keyer board which has been repurposed

Hi Glenn, I have the Signalink USB. Tom, N8EUI

Yes. You can create macros to control some RPI output pins. Pages 102 and 103 describe how to do this. !SWn where n is 0-7 This function requires a special USB cable: FTDI C232HM (C232HM-EDHSL-0). Thi

Mike, Could you use what controls a relay on a relay board? I have been working with several relay boards to do other things but it should be possible to access the pins . Example https://www.instruct

Anyone? Howard?

Hello I have found a case and the hardware can put in with the keyer board and audio board same small modification must do. The CW poti and the RJ45 Port adapter must sound out and relocate. Info and

#rigpi

Hi Tom Is your Signalink the USB one or the original sound card one? I think you may be describing the latter. Mine is the USB model. Din cable to the rig and USB cable to the rigpi. If yours is not t

Hi Howard, I have an FT-920 and a RigPi with and audio board. My Signalink that I use for everyday digital operation is connected to the 5 pin DIN jack in the rear of the rig. I don't want to disturb

Hi Glenn, When using the Signalink, how do you send audio back to your '857D? There are three mini connections on the back of the Signalink...the speaker, aux and monitor. I would assume I would need