Good Evening! I am having this same issue with my ICOM I -746PRO. It is intermittently switching between VFO A and B did you find a resolution? AG4ZV ag4zv@...

Thanks Johnny. This Hamlibs compilation guide is very useful. I greatly appreciate all of the coding projects and help you give to your fellow amateurs. 73 and Happy New Year, Steve KE4LC

#hamlib

Finally Hamlib 4.0 stable version was released some days ago. To download and compile this version follow my guide here https://www.pianetaradio.it/blog/hamlib/ Best 73 and end of the year Johnny iz8e

#hamlib

I finally upgraded to v2 and also hooked my 7300 up for the first time. Works fine with RigPi but I cannot get Flrig to connect using the same settings - USB Silicone Labs 7300 port at 115200 baud wit

Thanks Kurt that is a huge help Neil

Got it. Thanks Kurt.

Sarma, VE6TCK (Neil) is looking for RigPi control commands that will enable the auto-tuner remotely. Neil, My RigPi is down for upgrades so I can’t get directly into the commands that I know that I ha

Good troubleshooting! Just a reminder to RigPi users that, when writing macros you no longer have to translate pass-through rig CAT commands into hexadecimal! Hamlibs, the command library under the ho

Found the solution in another post which is leave the 756pro set up to auto tune on TX also should mention I was able to turn off the preamp with "*L PREAMP 0" but to turn on the preamp I had to use "

While I am no expert, I heard that AH4 will better work with an untuned EFLW antenba than almost tuned invV or dipole. Please read manual on specification and procedure. All the best of 2021 oncomming

Got most of the RSS working with my 756PRO but need help with Tune command to activate the Icom AH4 remote tuner, I have tried several commands but no response at the radio.

I thought that might work. Glad it did! Perry K4PWO

Please tell us a bit more about your problem. Is it a frequency setting problem or transmit problem? Are you using RigPi 1.05 or RigPi 2.0? In Advanced Radio Settings do you have a check in the Disabl

I don’t understand why the split function don’t work with my Icom IC7100 ?For info this function is ok on Flrig that suppose the issue don’t provide of the tx. Thanks F6fjh

I was working with Rick, W0RDO, when we discovered that his remote (laptop) Mumble client was set to Configure/Settings/Audio Input/Transmission/Transmit to "Continuous" and no audio was being sent fr

Tom, I purchased a RPI USB-C 3A power supply from Digikey for $8 plus shipping and Micro USB to C adapters on amazon. That works great. Have no issues. If you get the Raspberry Pi 4, I believe it uses

Hi, There are plenty of 5V power supplies for iPhones and MacBooks that should work fine. That is what I'm using. Example: https://www.amazon.com/Charger-AUKEY-GaNFast-Technology-Delivery/dp/B087C625C

Can anyone provide me with a link for a 5v power supply for the RigPi? I ordered a 3 amp with a micro USB connector from Amazon, but the connector is too small. I'll have to send it back. Thanks, Tom

Perry. Thanks for this. I tried your suggestion with Win32Diskimager and it behaves the same...it copied both partitions even though I only specified the main (FAT32) drive. Thanks for your help. Dave

Thanks Bruce, for this and the additional information you provided (downloading and using Buster to boot the RigPi and then make a clone using Buster OS's built-in GUI clone utility.) Before I got to