John... My suggestion is to get it working on a PC first. Then you know your settings in the radio are correct. Download and install FLDIGI stand alone. Then get it to work with your radio. If you don

I have been trying for months to make my KENWOOD TS 2000 work digital mode with my MFJ 1234 and have had no success. I am copying Fldigi but have no clue about transmitting with this set up. I bought

The "update" is actually a total replacement of the previous version. You "burn" the new image to an SD card using the Raspbery Pi Imager software on a Mac or PC, replace the existing SD card in the P

Dear all have just acquired an mfj1234 and possess a icom 7100 rig Have managed to connect and sync the icom with my ipad and all devices but the audio doesn’t seem to function also was trying FT8 and

I am “trying” to set up a new RigPi for our radio club. I purchased the RigPi 2.0 update but the update process is confusing (to me) It appears rather daunting so I am looking for any resources to mak

Hi John, it's true, but 4.1 is a beta version, it is updated every day by the hamlib team, sometimes there are errors or issues. At current time the last stable release is the 4.0

#hamlib

Swiping left was the first thing I tried. Doesn’t work here in Portrait or Landscape orientation with my Safari browser. I did find a Page Zoom in the iPhone setting under Safari for Page Zoom and set

Hi Doug, Yes. It will be closer to “[sysdefault: CARD=CODEC]... When you make the change, click Apply. After changing both settings, restart Mumble to have the changes stick. —Howard

#ic-7100

Thanks Howard. Just to clarify, both the audio input and output in Mumble should be set to “Sysdefault: CODEC” rather than “Default Device”? I am out of town right now so I will try when I return home

#ic-7100

Hi Pierre, RigPi assumes that the split VFO mode is the same as the main VFO mode. —Howard

Hello Howard I’ve try différents test to understand the problem.The issue is not the frequency ,it’s the mode ,my problem was when I ask the question RX VHF in Fm and transmit in SSB (last mod )in fac

Hi Doug, The selection snd_rpi_proto is the RigPi Audio board, but you are using CODEC audio through the USB cable. You won’t see an exact match in the Mumble device lists, but you should see somethin

#ic-7100

I have an IC-7100 connected to a RigPi2 with the USB cable. I can connect to the mumble server from a remote computer but have no TX or RX audio. The Audio input and output tabs in the mumble setup sc

#ic-7100

Hi Don, As suggested, swipe left. This is a new feature in RigPi 2.0. —Howard

Hi Don, Not sure what is going on. I see my mic gain slider running RSS on my iPhone XS. I am running the Safari browser. See photo.

Don't know why it doesn't size correctly but maybe turn the phone vertical and scroll left?

The mic gain is not available on an iPhone 10S when connected via the browser.

Go to SETTINGS>Advanced Radio and put a check in “Disable Split Polling.” Reconnect the radio. —Howard

Very nice guide - thanks for sharing. It compiled cleanly for me. But - when I run rigctl -V on the RigPi 2 prior to attempting an install - it replies version 4.1 is already in place. So compiling 4.

#hamlib