Thanks guys...I didn't boot the image yet (wanted to read the manual first) so I guess I'll try the rigpi.com option. Thanks! 73's Mike WA3O

Hi Mike, The manuals are also found at RigPi.com in “RigPi Downloads” section, online and downloadable pdf formats. 73, Steve KE4LC

Hi Mike Boot up your new RigPi2 and login to the RSS page with your browser and check out the Help menu. Most of your answers will be found there. Howard did a great job with the Help section. After t

Hello group. I just purchased the Rigpi2 image and I was looking for the manual? In particular I am looking on info on how to do the camera and remote GPIO switching etc. I wish they would just includ

Dan, You do not need do anything outside the case. There is a switch for power on and off. With a 4 relay board and the script for a cell phone is already written. I am in the process of opening up my

Don, I along with others are following with interest your experiments. Keep on keeping on, Dave.

Funny Dave, it seems that MFJ tends to over promise. I too have been running remotes using a PC and Remote Desktop applications for years, but would like to get away from the W10 environment and expen

The link below is still busted. Here is a good link to the device on amazon: https://smile.amazon.com/dp/B07TS2GZCJ/ref=cm_sw_r_cp_api_glc_fabc_X4D8FbQTZ726F?_encoding=UTF8&psc=1 Thanks 73 Jim W7RY On

Why not share to the list? Or post onto the groups page? Seems odd... Thanks 73 Jim W7RY On 1/3/2021 10:45 AM, radiorusso wrote:

#ftdx3000

Hi Steve, I sat down to start on the FT-991 one-pager but came up with writer's block! Would you be so kind as to let me know when you get your FT450D file done? I'd like to use your format for my wri

And there is the problem.... An end fed antenna, which is looking for any return (other half of the antenna) it can find. Any hardware and cable will fit the bill... Start with a dummy load. Even a 10

Ferrites, ferrites, and more ferrites… All cables, audio, USB, and power to the Pi should have ferrites. Also, it sounds like you have the coax isolator in the shack – it should be on the outside wher

Hi, Sounds like the wiring is resonating on 10m. If you don’t have a few ferrite clam shells try a longer Ethernet cable. Good Luck, Dave Wa3gin

I have the original MFJ-1234 running 5 feet away from the radio connected via USB and WiFi. The antenna is an endfed 40-20-10m with a 9:1 transformer connected to a Common Mode Filter Choke / Noise Su

Hi Dan, Here is a link to the device: https://www.amazon.com/VAVOFO-Compatible-Waterproof-Countdown-Smartphone/dp/B07QVPQWBZ/ref=sr_1_9?crid=22C58XC6KKM9Z&dchild=1&keywords=smartlife+plug&qid=16097030

Hi Dave! Can you share what device you are referencing? I would like to remotely power on/off my 240VAC amplifier as well. Perhaps it is pair of relays in a homebrew configuration? Thanks for helping!

BUT… power cycling a RPi without doing an orderly shutdown risks corrupting the SD card or other OS device. If you do a remote shutdown then power cycle to restart that is OK. A better solution is to

Wondering if there is a solution to remove white noise from RigPi / Mumble Audio. With IC-7300 into a dummy load (no signals present) significant amount of white noise at the remote end using Macbook

#ic-7300

Mark contact me off the list I have Rigπ setup on 3 FTdx 3000's 1 for me and 2 others for Hams operating remotely from Florida I also have an extensive list of macros that allow operation of all the f

#ftdx3000

I use the outlet to power a separate pair of relays that serves 115AC to the rack and 220AC to the linear amplifier. The control relays draw a few hundred milliamps but the relay contacts are rated at