Remember you connect your wiring from the switches inside your amp. Mine is also 220VAC. There is a script for the switches on the Pi already written. You just need to modify to your operation. --

Hey Allen! Thanks! This is the kind of thing I was interested in. Cheerio! Dan Heather, N1DH Sent from Mail for Windows 10

Oops! I found what I needed. It turns out the caption for the device on page 148 is located at the bottom of page 147. Digital Loggers' IoT Control Relay. So I go on with the project... Thanks Dan

Dan, Yes there is a way to turn on & off, then turn standby & operation. They have several add on boards for a Pi3B or 2B. Use a 4 channel Relay Hat -- Allen Higgins KE8KZO

I would like to remotely control my old (SB-200) linear amplifier power on/off. At the top of page 148 in the V2 RigPi User Manual (Help menu/RigPi Help on the browser tuner page) it shows a most

Hi all I have finally got my Yaesu FTDX 5000 connected, I have the Yaesu SCU 17 between the Rigpi and radio and the cat control side works fine. We have been unable to get any sound tx or rx. I wonder

Bruce are you using an I phone or I pad for the remote ? 73 Russ W4PGT

Hi Ed; I currently have the same issue , could you please send me your setup. Been fighting this issue also. Thanks Bruce

Hi Howard The Yaesu FTDX 5000 is now connected, it was the power supply. It was changed from a 2.5 amp raspberry pi charger to a 3 amp charger. The radio connected 1st try, the only part to sort now

Hi Howard My carer wasn't sure where to find the civddr was but below are photos of the error now, he has also taken pictures of the settings page. 73's Dave G4WBB

Hi Bruce, you will have to install the free Mumble app on your iPhone. Go to the App Store application installed on all iPhones. Tap the hourglass search icon and enter Mumble. Upon searching, you

RigPi Recent upgrade to RigPi2 image. HDMI display, mouse, keyboard. Directly connected. USB cable to Icom IC7610 USB1 port Other than a couple glitches with the power on/off function, I have the RSS

Hi Jim, I guess you mixed me up with Bruce.... 😁 I see that you have exactly the same problem as I do. I already found the commands *V VFOA and *V VFOB, but the radio goes in fact not to VHF

I noticed that RIG π VER 2 seems to change my mic gain on its own. If it is set to 10 on the slider the mic gain is set to 30 on the radio. I usually run the radio mic gain around 14 to keep from

Thanks Steve, the baud rate is 38400, I will get menu 35 checked 73,s Dave G4WBB

Please check the FTdx5000’s Menu Group baud rate setting 032 - Gene CAT BPS - to ensure that it is also at 38400 bps. While you are in the menu mode, ensure that 035 - CAT indicator LED is also

The photo resolution makes it hard to see, but I do see --civaddr. Make sure that is set to default. Confirm that the Baud rate in the radio is 38400. --Howard

HowarI forgot to mention it's plugged into the Yaesu SCU 17 Dave

Hi Howard Below is a photo of the error message Dave G4WBB

Hi Howard Thanks I will get my carer to do it 73,s Dave G4WBB