Thank you very much for the info, Howard. Also, thanks for RigPi. I'm having entirely too much fun working HF from my phone at work!

HI Robert, Sorry, I answered the wrong question. Mumble should be updated automatically when you update the Raspberry Pi. Go to Terminal (the black icon at the top fo the desktop) and use these

Filter 2 is the default Icom filter for the IC-7300. RigPi use Hamlib to send frequency commands. A frequency command consists of the frequency and bandwidth. RigPi uses "default" for bandwidths.

Hi All I am trying to set up a1234 purchased used. Rig control on my IC-7000 works great, but I have been unable to connect audio. When I try to connect from a windows device I am told the Mumble

Hi, I'm running RigPi with a 7300. Everything is running smoothly with one exception. Every time I change bands with RigPi the radio changes from filter one to filter two and I have to manually change

So I'm wondering, are there recommendations for my android devices as to which VNC app and which Mumble app to use? I did a quick search in the play store for both. Seems like there are so many to

Hi Tom, I was responding to your private email when I saw this message. Yes, we can change the version number which will force an update. That will replace some but not all the UI files. The version

I'm thrilled---almost everything is working and I don't want to set it up all over again. Unfortunately my RigPi web app is not working and needs to be re-installed. Is it possible to somewhere

Hi Dave, I believe the IC-7100 has built-in audio CODECs so only a USB control cable is required. The FTdx-5000 can use the optional SCU-17 interface provided by Yaesu, or you can use the RigPi Audio

Kevin, MFJ sells the RigPi memory card for $49.95, but you can also download the RigPi 1.05 image (MFJ-1234OS) for $29.95 and not pay shipping. --Howard

Hi Matthew, Thanks for the info on the FT-897D. RigPi 1.05 uses a CAT command to determine PTT status to tell when the radio is in transmit. That requirement complicates PTT operation. Yes, you can

Hi Karl-Heinz, The two USB connectors on the front of the IC-7700 are not meant for radio control or audio. They are for a USB flash drive or Keyboard. On the back of the radio you will find a CI-V

Hi, please can I connect also my IC-7700 to the MFJ1234 In the front I can find on my IC-7700 2 USB connections I find the following notice in the manual, it says also About the [USB] connector: •

I haven't bought a RigPi yet, but am looking at it to switch to a non-PC dependent solution. I have a Yaesu FT-897D. Using a Windows based remote solution and a RigBlaster, here is what I have found

If you have a spare SD card available, download a copy of the standard Raspian operating system - which is free - and try booting your RigPi with it. Obviously, that will not give you the RigPi

Is MFJ still charging $49 for a new card? Kevin, KJ7EHQ

Ok thanks I think it's going to have to have a macro assigned to it.

Hi BJ, The Tune button keys the CW line so you can tune the radio. Think DX-40, hi! You can reassign that button if you wish or create a macro for the TS-2000 to tune it. Use the ESC key to stop

Hi Howard I looked on the forum for all the info on the rd-2000 but I didn't see a lot maybe I looked in the wrong place I am curious if anyone made macros for that rig. Thanks again

Thanks everyone for the guidance. I think at this point I will contact MFJ and see if they will provide a card under warranty. If not I will try the image download route and see if that works. I will