Hi everyone, I successfully connected my MFJ 1234 to my Icom 7300 under my account. I then wanted to add my son to the account - I set up a user name and password, and tried to do the radio settings

Not sure then since I'm still exploring the rigpi as well. I know that I received a different error when the radio was turned off or disconnected but did get that error when the port was not

Thanks Jason. I selected USB zero. Did not work. Thanks Darrell WB5QEM

I'm just getting started as well so I may be off base, but do you have the "R" port selected in Settings>Basic Radio?

I recently purchased a Rigpi and after waiting about 6 weeks for power suppl I am trying to get it working. I am using ethernet connection to the router and a usb cable from the radio. I have

Hi Howard, I got a question for you. First a little background. When I first got my rpss, I did a dump of the database before adding any users or updating. Some time later I updated to 1.05 then

You might be able to control the Wouxun using the Remoter equipment. The Wouxun is similar to the Yaesu FT8900 featured here http://www.remoterig.com/wp/?page_id=1602

Does that radio have a CAT port? If it doesnt you will not be able to control it remotely. It would be audio only. 73 Glenn VE9GJ

Has anyone used the Wouxun KG-UV980P with a RigPi, I am in the process of setting up a remote operation on my home network, and looking at the quad band Wouxun.

Hi Steve, You can always abort a CW transmission with the ESC key. The buffered code is kept in a database field, so outgoing CW continues after a reboot (unless you use ESC). --Howard

Hi Harold, I was using the integrated keyboard mouse on my Dell laptop when I observed the macro Keyer command repeats. If anyone was listening, they had to endure five back-to-back CQ calls! Per

Hi Steve, Are you using a mouse? If so, can you try a different mouse? RigPi executes macros when the tap/click is released. There currently is no debouncing done, but it can be added. I've had no

The RigPi is working great for my needs. One hiccup.. Especially when activating the RigPi Keyer from macro buttons, I notice an occasional disturbing event - one apparent mouse click will repeat

Mac, can you connect two devices, such as a phone and laptop, to the Mumble server? Can they hear each other? --Howard

Sent from Samsung Galaxy smartphone.

Hi Mac, You can certainly update Mumble to the latest version. The latest Mumble client is 1.3. However, it is unlikely the problem you are seeing is caused by using an older version. Is receive

Ok. Thank you.

Hi Garry, Normally one would expect a grace period when a new major update becomes available. A decision for RigPi 2 has not been made. --Howard

RigPi allows mumble users to connect but no longer hears user audio. Audio is being sent to the RigPi Mumble Server and they show as being connected but when the red lips are active on remote phones

Howard, for those of us who purchased the MFJ1234 this year, are we going to have to pay for the version 2 image or will that be free? I received mine about the 7th of Jan.