Hi Harry, Maybe it’s the power supply? I discovered that the inexpensive wall plug-in 5V DC power supplies typically sold to power Raspberry Pi’s are electrically very noisy. Most don’t have

Hello I have a problem, my rigpi is interfering with the 80 meter band of my flex radio 6400 if I put the rigpi further in the house, the interference will decrease, but there is no listening to the

Thanks Howard. I guess I’ll wait until next week ;)

Thanks, Karl. We'll post information about that next week. I agree that we need to have a way to handle recent purchases. --Howard

Usually when you buy software after the new release was announced, you get the upgrade for free. Does this apply here as well? Meaning, when I pay for the download of version 1.05 today, will there be

RigPi, version 1.05 (the current production version), is now available for download from the MFJ web site. The price for the download is $29.95. This is the same software contained on the RigPi

Hi Howard Is this a windows laptop? Delete your mumble connection on your laptop and try again. Make sure you create a new unique user name like laptop1. If you get a prompt to accept a certificate

Hi Ron The lsusb didn't actually do anything, just confirmed what the pi was seeing. Another check would be run ls -l /dev/ttyUSB* <enter> In a terminal after plugging in your usb-232 adaptor. Look

Hi Howard et al, I recently purchased a RigPi for my ICom-7600. So, I’m now able to connect to my radio with a laptop via the internet. Unfortunately, I’m unable to get Mumble working. When I

Thanks, Glen! I was able to use the lsusb command in the terminal to see the RS232 to USB adapter identified as Prolific Technology, Inc. PL2303 serial port. The USB ID utility did not find it at

Aloha, I have an unexplained situation on the RigPi (ver 1.05) running WSJTX (Ver 2.1.2). Occasionally when calling CQ on the 20M band with Fake-it set, the frequency jumps to 14.074.500 (normal) but

If you to want to see what RigPi thinks it is open a terminal and type lsusb <enter> Now plug it in and do lsusb again. The difference will be what the pi thinks it is. 73 Glenn VE9GJ

Thanks, Howard. Guess I'll spring for a new adapter... this one is rather old, so that could very well be the issue. 73, Ron

I wonder do I have to download on the rigpi vnc viewer ??? grt harry

Hi Ron, Linux will recognize most serial-to-USB adapters with no extra drivers required. From your description it sounds like your adapter may have an issue. Select a Prolific chip set adapter for

Hi Dick, The plan is to have a version 2 image download available on the MFJ web site. There will be a charge (less than the SD card). Once version 2 is released I hope to enlist some help to make

I'm new to Rig Pi and just got all the port forwarding on my router figured out so I can see the Rig Pi on my LAN and remotely through the WAN. Now, it's time to do the radio interface to my K3. I

Howard, will version 2 be on GitHub, or will it be a pay to upgrade from MFJ? Dick, W7PP

Thanks Steve, I’m happy to help. I hope it works for your FT 450d. Yes you may share the interface with others. Frankly, I’m somewhat surprised That MFJ hadn’t come up with it by now. I’m

Thanks Jim. Will get the parts order out immediately! Looking forward to trying it . 73’s, Steve KE4LC