Glad you got it going! Have fun 73 Glenn VE9GJ

Hello, This email message is a notification to let you know that the following files have been uploaded to the Files area of the RigPi@groups.io group. /RigPi Image

Enjoy your RigPi ! Glad to help Mike WB6DJI

Hello Howard et al, Sent the previous email before I was finished. Anyways, I want to thank Glenn VE9GJ, Mike WB6DJI , and Harold W5ZZT for their help. My RigPi now works as advertised. Woo-Hoo! Take

Hello Howard et al, Many thanks to Glenn , Mike, and Harold W5ZZT

Hi Howard, Could you post the release notes for 1.05? Thanks, George

Hi Harry, Several users have reported noise problems from an HDMI cable connected to the Raspberry Pi. If you have a monitor connected, try disconnecting the cable. You can disconnect other cables

Ferrites are our friends... wrap your I/O and power cables through Type 43 or 77 ferrite cores. The "computer" type ferrites are usually only good for VHF and up suppression. Perry K4PWO

Hi Steve Thanks again for the info if the rigpi is completely off, the power of the rigpi is normally connected to the mains, I have no malfunction as soon as the rigpi is switched on, the

Hi Harry, Maybe it’s the power supply? I discovered that the inexpensive wall plug-in 5V DC power supplies typically sold to power Raspberry Pi’s are electrically very noisy. Most don’t have

Hello I have a problem, my rigpi is interfering with the 80 meter band of my flex radio 6400 if I put the rigpi further in the house, the interference will decrease, but there is no listening to the

Thanks Howard. I guess I’ll wait until next week ;)

Thanks, Karl. We'll post information about that next week. I agree that we need to have a way to handle recent purchases. --Howard

Usually when you buy software after the new release was announced, you get the upgrade for free. Does this apply here as well? Meaning, when I pay for the download of version 1.05 today, will there be

RigPi, version 1.05 (the current production version), is now available for download from the MFJ web site. The price for the download is $29.95. This is the same software contained on the RigPi

Hi Howard Is this a windows laptop? Delete your mumble connection on your laptop and try again. Make sure you create a new unique user name like laptop1. If you get a prompt to accept a certificate

Hi Ron The lsusb didn't actually do anything, just confirmed what the pi was seeing. Another check would be run ls -l /dev/ttyUSB* <enter> In a terminal after plugging in your usb-232 adaptor. Look

Hi Howard et al, I recently purchased a RigPi for my ICom-7600. So, I’m now able to connect to my radio with a laptop via the internet. Unfortunately, I’m unable to get Mumble working. When I

Thanks, Glen! I was able to use the lsusb command in the terminal to see the RS232 to USB adapter identified as Prolific Technology, Inc. PL2303 serial port. The USB ID utility did not find it at

Aloha, I have an unexplained situation on the RigPi (ver 1.05) running WSJTX (Ver 2.1.2). Occasionally when calling CQ on the 20M band with Fake-it set, the frequency jumps to 14.074.500 (normal) but