Adam, Sounds like you are hooked on FT8 like me. I don't run it much from the RigPi except when I used to do Beta testing. I run it on my PC with my Flex 6500. I am not sure why you even have the

Hi Harold! Good working you on FT8 the other day, haha. One thing I am noticing, Im watching the browser while FT8 sends out a CQ - sometimes, it says transmitting in WJSTX, however, the rigpi

I know the snipped captures came out small so in the radio setting make sure to change the split operation to None. Let me know if you still need help after this but I bet this will get you

You need to code your radio in WSJT just like you did in the RigPi setup. It should look like this on the radio tab. Just make sure you set the baud rate to what you are using. Then on the audio

Adam, Glad you got it working. I will tell you my secret that keeps me from having the audio issues that I see a lot having is I never set any of the audio setting in Mumble or the digital programs

Well scratch that, for some reason my PCM setting was all the way at zero. I guess thats what sends audio out? Weird that I didnt mess with it - but it seems to be working now. Sorry for the false

Finally at the remote station.. Thank you for your help. The radio works USB with mumble and CW no problem. So again on FT-8 . I have cat and I am decoding. I just would like to confirm my

Hi Folks, So for the majority of the day I was running FT8 remote, no problems. Towards the end of the work day, I saw the message come out about the update to 1.0.5 so I updated via the browser, PI

Sure, just click my name/call after the Pi, then click "Send Email." --Howard

From here do I send it private?

Excellent! In case you run into this again, Hamlib normally uses the highest Baud rate listed for a radio when you use 'Default.' According to the Radio Capabilities you can show in the Advanced

Hi Bill, You are right, the user name shouldn't change other than by changing it in the Account Editor. When you looked at the Users table, how many records (lines of data) were there? Am I

It worked !! I connected to my radio!! Thank you Howard... Now to check my audio thank you again..

So I went in and edited the user via phpMyAdmin on the PI and I'm able to get into RSS ok. Some how while I was out I must have entered the password in place of my User Name and the program modified

On my IC-7100 I was able to Open and Close the USB Audio SQL setting using this macro: Open (squelch is on): *1w \0xFE\0xFE\0x88\0xE0\0x1A\0x05\0x00\0x83\0x01\0xFD Closed(Squelch

OK, go to SETTINGS>Advanced Radio. Change Baud from Default to 4800, and click the Cloud Up Arrow to save it. Reboot RigPi and try connecting the radio again. --Howard

My CAT rate is 4800 bps

Everything was working today. While I was out RSS dropped connection to me. I went to log back in and it won't except my login. When I got home I noticed that RSS server was also disconnected. I can

Adam, The easy way to control the RF level is to load FLRIG which has that was one of the slider options. That's how I adjust it when working remotely, though it requires

Please look in your radio menu to see what the current Baud rate is. It is also noteworthy that it looks like there are 2 rigctld processes running in the Test Mode screen shot. There should only be