Date   

Re: Mumble connected on audio

Howard Nurse, W6HN
 

Hi Herb,

Check two things that can affect audio quality: 1) make sure you have set the snd proto device for the default audio device by right-clicking the speaker icon on the Raspberry Pi desktop, and, 2) look in Mumble Configure>Settings>Audio Input to make sure the noise reduction slider is all the way to the left (off).  If you make changes to Mumble, click apply then OK at the bottom of the settings window, then restart Mumble to have the settings stick.

--Howard


Re: Remote Powerdown of Rigpi

Howard Nurse, W6HN
 

Hi John,

From RigPi you can shut down processing, but not power.  There are power switching devices that can be switched on and off from the Internet independent of RigPi.  Take a look at Wemo devices, for example.

--Howard


Re: New file uploaded to RigPi@groups.io

withspirit2@...
 

Just FYI,

My FT-991A used menu item 106 (instead of 108) for SSB usage, and 109 (instead of 111) for the USB setting.

Rick


Remote Powerdown of Rigpi

johnpierce
 

On vacation when I was operating my KX3 remotely and decided to power the KX3 off, I could not figure out how to power the system down.  I just had to let an AC timer on the power supply remove power later in time to take the system down.  Is there a way I can exit/shutdown Rigpi after I have powered off my KX3?

John


Re: Updating fldigi on the Pi

Joe Clements <vy2jc@...>
 

How can I get the Mumble on my rigpi ??


From: RigPi@groups.io <RigPi@groups.io> on behalf of Bo Barry <bobarr@...>
Sent: Thursday, September 12, 2019 11:39:48 PM
To: RigPi@groups.io <RigPi@groups.io>
Subject: [RigPi] Updating fldigi on the Pi
 
Success. Info in the files section on a successful way to update fldigi.
Attempts were made to eliminate the need to use superuser but no solution was found.
Works great now.
73, Bo W4GHV


Re: Mumble connected on audio

HERB KEATON N2GEW
 

Good Morning to all:

ICOM-756PRO 3

I am up and running with the RigPi and Mumble in my LAN. I changed over to the
ACC 1 connection, Howard, and the corresponding adjustment required to the RigPi header. 
I was heard OK on the air. I expect little trouble making the adjustments over
to WAN, but just sitting back and contemplating the best approach since the Asus Router
doesn't seem to support port translation. I will look into port triggering to see if that
will offer some enhanced security similar to the port translation recommended here.

I DID NOT go into SSB Data Mode on the radio to transmit or receive voice. I will have
to research this as I am not sure why the manual states this and how the receive audio
would work in that mode (?). And a Macro will need to be set to push the radio into SSB data mode?

While reports say the audio out was OK, I wasn't impressed with the quality of the
receive audio: Is there anything authoritative I can go to on settings for Mumble?

Thanks to all on the forum.

73 / N2GEW
 


Re: Ic7300

Joe Clements <vy2jc@...>
 

And another thing I'm not very good at computers it would be some nice if I could get one of you guys are girls on the radio on HF


From: Joe Clements
Sent: Friday, September 13, 2019 9:10:36 AM
To: RigPi@groups.io <RigPi@groups.io>
Subject: Re: [RigPi] Ic7300
 
Okay thank you how do I get the program to work on my Samsung S10 do I need an app or something?


From: RigPi@groups.io <RigPi@groups.io> on behalf of Mark Weisheimer <mweisheimer@...>
Sent: Friday, September 13, 2019 8:57:24 AM
To: RigPi@groups.io <RigPi@groups.io>
Subject: Re: [RigPi] Ic7300
 
Joe,

There is a very thorough guide that includes using RigPi with the IC-7300 in the files section.
It may be overly thorough, but all of the information is there:

https://groups.io/g/RigPi/files/Homebrew%20Information%20from%20Users/RigPi%20Installation%20For%20Icom%20USB%20Radios.pdf

There is another guide too, with fewer details:

https://groups.io/g/RigPi/files/Rig%20Configuration%20Information/ICOM/ICOM%20IC-7300%20Setup.pdf

There is also a thread by Howard at:

https://groups.io/g/RigPi/message/442

There are a number of message threads on the IC-7300, you can find them using the search tool at the top if you use IC-7300 as the subject.
To answer your question directly would require a tad more info from you.
Which program are you asking about downloading?
If it is Plumble for the Android (that is the Android version of Mumble) you go to the Google Play store and download it from there.
Same for VNCviewer if that was what you are asking about.
Lots of folks ready to help.

--
73 - Mark - K8MHW
'A RigPi Enthusiast!' - I am not otherwise affiliated with MFJ or RigPi


Re: Ic7300

Joe Clements <vy2jc@...>
 

Okay thank you how do I get the program to work on my Samsung S10 do I need an app or something?


From: RigPi@groups.io <RigPi@groups.io> on behalf of Mark Weisheimer <mweisheimer@...>
Sent: Friday, September 13, 2019 8:57:24 AM
To: RigPi@groups.io <RigPi@groups.io>
Subject: Re: [RigPi] Ic7300
 
Joe,

There is a very thorough guide that includes using RigPi with the IC-7300 in the files section.
It may be overly thorough, but all of the information is there:

https://groups.io/g/RigPi/files/Homebrew%20Information%20from%20Users/RigPi%20Installation%20For%20Icom%20USB%20Radios.pdf

There is another guide too, with fewer details:

https://groups.io/g/RigPi/files/Rig%20Configuration%20Information/ICOM/ICOM%20IC-7300%20Setup.pdf

There is also a thread by Howard at:

https://groups.io/g/RigPi/message/442

There are a number of message threads on the IC-7300, you can find them using the search tool at the top if you use IC-7300 as the subject.
To answer your question directly would require a tad more info from you.
Which program are you asking about downloading?
If it is Plumble for the Android (that is the Android version of Mumble) you go to the Google Play store and download it from there.
Same for VNCviewer if that was what you are asking about.
Lots of folks ready to help.

--
73 - Mark - K8MHW
'A RigPi Enthusiast!' - I am not otherwise affiliated with MFJ or RigPi


Re: Ic7300

Mark Weisheimer - k8mhw
 

Joe,

There is a very thorough guide that includes using RigPi with the IC-7300 in the files section.
It may be overly thorough, but all of the information is there:

https://groups.io/g/RigPi/files/Homebrew%20Information%20from%20Users/RigPi%20Installation%20For%20Icom%20USB%20Radios.pdf

There is another guide too, with fewer details:

https://groups.io/g/RigPi/files/Rig%20Configuration%20Information/ICOM/ICOM%20IC-7300%20Setup.pdf

There is also a thread by Howard at:

https://groups.io/g/RigPi/message/442

There are a number of message threads on the IC-7300, you can find them using the search tool at the top if you use IC-7300 as the subject.
To answer your question directly would require a tad more info from you.
Which program are you asking about downloading?
If it is Plumble for the Android (that is the Android version of Mumble) you go to the Google Play store and download it from there.
Same for VNCviewer if that was what you are asking about.
Lots of folks ready to help.

--
73 - Mark - K8MHW
'A RigPi Enthusiast!' - I am not otherwise affiliated with MFJ or RigPi


Re: Ic7300

vy2jc@...
 

Hi thanks for the email I am wondering how do I download that to the program


From: RigPi@groups.io <RigPi@groups.io> on behalf of Bo Barry <bobarr@...>
Sent: Thursday, September 12, 2019 11:46:46 PM
To: RigPi@groups.io <RigPi@groups.io>
Subject: Re: [RigPi] Ic7300
 
I found it very simple, following the guide. About 20 minutes. Adjusting the router was more challenging but the guide also helped there too.
Did you Google and download the two free programs Mumble and a VNC viewer?    Passwords are in the guide.
It is a very fascinating, complex, versatile, enjoyable venture, but a headache for a Linux bumbler who makes a lot of mistakes and keeps going.
Howard is of great help if you specify your problem.
73, Bo W4GHV


Re: Need help setting up different radios

Jan Blomquist / SM5SUH
 

This morning when I started everything again the ALSA input fail was gone so my guess is that the connection between RigPi and IC-7200 was lost for some reason.

 

But the problem with connect to Mumble is still there. When I change the password in the ini file I cannot connect to the Mumble server anymore (of course have I changed the password in the client) but when I change back to the default password in ini file and client it works again?

 

Anyone have a clue?

 

Jan

 

From: Janne Blomquist / SM5SUH
Sent: Thursday, September 12, 2019 10:54 PM
To: RigPi@groups.io
Subject: Re: [RigPi] Need help setting up different radios
 

Finally I get hold of the command to save and quit the Mumble ini file.

I paste the file path command from Help in to the terminal.

Moved to the serverpassword as mentioned in help and change it.

Use Ctrl + O to write out and exit and after that I cant connect to the Mumble server at all.

When it start up this text is showing.

1:45 PM] Welcome to Mumble.

[1:45 PM] Opening chosen ALSA Input failed: No such device

[1:45 PM] Opening chosen ALSA Output failed: No such device

[1:45 PM] Connecting to server rigpi.local..

[1:45 PM] Connected.

 

So now it safe alright, no one can use it including my self  HI

Jan


Re: Ic7300

Bo Barry <bobarr@...>
 

I found it very simple, following the guide. About 20 minutes. Adjusting the router was more challenging but the guide also helped there too.
Did you Google and download the two free programs Mumble and a VNC viewer?    Passwords are in the guide.
It is a very fascinating, complex, versatile, enjoyable venture, but a headache for a Linux bumbler who makes a lot of mistakes and keeps going.
Howard is of great help if you specify your problem.
73, Bo W4GHV


Updating fldigi on the Pi

Bo Barry <bobarr@...>
 

Success. Info in the files section on a successful way to update fldigi.
Attempts were made to eliminate the need to use superuser but no solution was found.
Works great now.
73, Bo W4GHV


New file uploaded to RigPi@groups.io

RigPi@groups.io Notification <RigPi+notification@...>
 

Hello,

This email message is a notification to let you know that a file has been uploaded to the Files area of the RigPi@groups.io group.

File: RigPi_fldigi_update.txt

Uploaded By: Bo Barry

Description:
Info for updating fldigi to the latest version on the Pi, with USB audio additions, Bo W4GHV

You can access this file at the URL:
https://groups.io/g/RigPi/files/RigPi_fldigi_update.txt

Cheers,
The Groups.io Team


Re: Logs

Leslie Loftin
 

Thanks, Howard,
One other item I did not report, but here it is as briefly as I can describe it.
I was able to see that I had created some other log files, though the field tabs are multiple, as I reported.
In addition, I logged in ten contacts in a log (General) for the “Route 66 on the Air” event.
Yet, when I open ANY LOG those same ten contacts populate the fields. Like the proverbial bad penny, they won’t go away.
If I delete one record the default seems to be to delete it from all logs.
Hmmm…

Les

On Sep 12, 2019, at 7:32 PM, Howard Nurse, W6HN <hlnurse@...> wrote:

Hi Les,

Something does appear to be amiss with the Log Designer window.  I'm seeing strangeness, not what you are seeing, but I need to figure out what is happening.  I'll let you know.

Logbook configurations are saved in one of the MySQL databases used by RigPi.

73, Howard W6HN


Re: Logs

Howard Nurse, W6HN
 

Hi Les,

Something does appear to be amiss with the Log Designer window.  I'm seeing strangeness, not what you are seeing, but I need to figure out what is happening.  I'll let you know.

Logbook configurations are saved in one of the MySQL databases used by RigPi.

73, Howard W6HN


Re: Need help setting up different radios

Bruce N7XGR
 

Jan,  It will be easier using Leafpad to edit files.  Do this in a terminal window.
sudo apt-get update
sudo apt-get install leafpad
Copy and paste the first line then press enter, copy and paste the second line and press enter.
To use Leafpad start the terminal window, This line is an example of the entry to start
Leafpad to then be able to edit the file. sudo leafpad /etc/apt/sources.list
You use the full path to have Leafpad locate and open the file, when done you click on File
in the Menu then click Save.

Bruce  N7XGR


On Thu, Sep 12, 2019 at 4:13 PM Janne Blomquist / SM5SUH <handla@...> wrote:

OK I will try but for a nonlinux users is not easy. I found the file and change the password but then its stop. I don’t know how to save the change and exit the editor  :-)

 

Jan

 
From: Howard Nurse, W6HN
Sent: Thursday, September 12, 2019 9:17 PM
To: RigPi@groups.io
Subject: Re: [RigPi] Need help setting up different radios
 
Hi Jan,

I agree, reading dynamic output power level should be in Hamlib, but I’ve not found a radio for which that is provided.

Changing your user password for gaining access to RigPi is easy, go to SETTINGS>Users and click Edit on the account you want to change.  The Mumble password requires a file be edited.  How to find that file and what to change is provided in RigPi Help.

—Howard


Re: Need help setting up different radios

Jan Blomquist / SM5SUH
 

Finally I get hold of the command to save and quit the Mumble ini file.

I paste the file path command from Help in to the terminal.

Moved to the serverpassword as mentioned in help and change it.

Use Ctrl + O to write out and exit and after that I cant connect to the Mumble server at all.

When it start up this text is showing.

1:45 PM] Welcome to Mumble.

[1:45 PM] Opening chosen ALSA Input failed: No such device

[1:45 PM] Opening chosen ALSA Output failed: No such device

[1:45 PM] Connecting to server rigpi.local..

[1:45 PM] Connected.

 

So now it safe alright, no one can use it including my self  HI

Jan


Logs

Leslie Loftin
 

Having a few problems in trying to create a new log (format, etc.) in the web browser.
When I chose a field from the Master List (white area) and move it over to the left to the “Logbook Columns” (yellow area), I find the field to get replicated once more. In other words, when I move “His Call” over to the left, I have two “His Call” in the Logbook Columns list.
If I delete one, they both disappear. This happens with any field I have tried to move.

Anyone seen this?

As a part of my troubleshooting, where do I find the logbook configurations (file) saved on the Rigpi? I have explored the Rigpi desktop through FileManager and had no success. From with WSTJX I can see the logs for wsjtx.log and wsjtx_log.adi. There are other files there also, but none seem to relate to the Rigpi web browser.
I am surely missing something, but what?

Les
WD5BYQ


Re: Need help setting up different radios

Jan Blomquist / SM5SUH
 

OK I will try but for a nonlinux users is not easy. I found the file and change the password but then its stop. I don’t know how to save the change and exit the editor  :-)

 

Jan

 

From: Howard Nurse, W6HN
Sent: Thursday, September 12, 2019 9:17 PM
To: RigPi@groups.io
Subject: Re: [RigPi] Need help setting up different radios
 
Hi Jan,

I agree, reading dynamic output power level should be in Hamlib, but I’ve not found a radio for which that is provided.

Changing your user password for gaining access to RigPi is easy, go to SETTINGS>Users and click Edit on the account you want to change.  The Mumble password requires a file be edited.  How to find that file and what to change is provided in RigPi Help.

—Howard

5921 - 5940 of 8654