Re: Rigpi has no internet connection #rss

Bruce N7XGR

Garry,  I would try this, download the current image from here,
I use 7 zip to unzip and use Balena Etcher to put the image on the micro card.  You will only need a 8 GB card.
This will be the final test to see if you can connect it to the router, otherwise might be a bad board.

Bruce  N7XGR

On Tue, May 5, 2020 at 10:15 PM Garry Chessen <Garrychessen@...> wrote:
Ok Howard. I will check with MFJ as it is only 2-3 mos old. 

On May 5, 2020, at 8:46 PM, Howard Nurse, W6HN <hlnurse@...> wrote:

Hi Garry,

I recommend trying a new Raspberry Pi 3B+.  It is unusual for a Raspberry Pi to fail, but all your tests don't leave any other possibility at this point.


Join to automatically receive all group messages.