Hi all I wonder if anyone can help me regarding the sound card set-up for the RigExpert Standard please. It has been some time since I used the unit for sound comms, it used to show USB sound CODEC fo

Good afternoon, my name is Christian Paul Pappatico, I live in Viedma Rio Negro, Argentina; I need a piece of equipment that you sell, the issue is that I can't get it and what you offer me is not a s

How can I check the firmware version on my AA-54? I think it is on the first screen, but it goes by so fast I can’t see it! Tnx, Kim WA4VKW

Good afternoon, my name is Christian Paul Pappatico, I live in Viedma Rio Negro, Argentina; I need a piece of equipment that you sell, the issue is that I can't get it and what you offer me is not a s

How can I check the firmware version on my AA-54? I think it is on the first screen, but it goes by so fast I can’t see it! Tnx, Kim WA4VKW

I have a 230 Zoom and a borrowed 230 Stick. I am trying to run them from a Samsung S2 Android (7) tablet. I can take measurements with either, but the Bluetooth connection keeps timing out on my table

Can the AA 55 Zoom measure the length of a 2 foot coax jumper? I tested a one and two foot jumper this weekend and the length read "ZERO" , My first thought was they were both bad. However, when I pla

Hi, I'm new to the group, I've searched but can't find any reference to this in the group. When I look for AntScope for iOS in the Australian App Store I get the dreaded "Not available in your Country

I was surprised I was unable to save a "cable loss" plot on my AA-230. I was going to be on the tower while my xyl operated the AA-230 and then I wanted her to save the chart but no luck or am I missi

After five months I still cannot connect my RE230 to my iPhone or iPad A. Yes all drivers, firmware, software and squirrels are up to date. Funny thing, the first time I used it on my iPhone, it worke

I have an Rig stick 230 V1.10 any updates? I like it Richard

I have been trying to find a way to measure impedance at the feedpoint of my antennas for many years. TODAY I [finally] SUCCEEDED! In theory there are several ways to do this: 1. Use an exact half wav

Any tips for pairing the two together. I instruct my Window’s BT to search for a mate; it can’t find the 230-Z (and its BT is enabled). Tried the normal stuff; reboot, power on/off, etc. Still no conn

Today I flashed V.1.19 into my AA-230-ZOOM. The calibration procedure is working once OK again. · BlueTooth works OK with my Android tablet; but it still times out way too soon. However, one or two me

Problem: CALibration function not working: I have run the analyzer’s self test twice. First pass: The first 2 tests passed. The “Load” test failed. This is the test using a 50 Ohm Load. I used my home

After a few days climbing the learning curve, I repeated all of the measurements again, carefully recording results. ALL 5 methods proved to be fairly accurate, some more so than others. I don’t know

Re the comment on avoiding front-end damage to antenna analyzer: “I wish I had seen the explanation from Alex earlier. His tip for shorting the connector before connecting to the analyzer is good” Thi

I’ve recently heard noises about the AA-230 not working on Windows 10z At the risk of taking redundant bandwidth, I offer the link that described the problem, received the solution, and offered acknow

Hello Roger, This is good information. I will certainly try measuring 200 and 10 Ohm resistors and see what it measures. I have 4 antenna analyzers, so I can compare the measurements to the others. I

For the past few days I have been comparing different means of measuring the exact impedance at the load (i.e., antenna), rather than at the shack end of the coax. Since the WX is still to cold to wor