RaspberryPi-4-HamRadio@groups.io

A gentle reminder. 2

At the bottom of each email sent out from groups.io is a link to mute a topic. If a topic is not interesting to you, please feel free to use that link to mute it and you will not receive emails concer

At the bottom of each email sent out from groups.io is a link to mute a topic. If a topic is not interesting to you, please feel free to use that link to mute it and you will not receive emails concerning that thread. Thank you.

By John Hays - K7VE / WRJT-215 ·

#tnc #raspberrypiH/W TNC's on Pi. 5 #tnc

I have a project for our local radio club. Because I have several h/w TNC's, Kam, Kam+, a couple of KWM-9612+, a PK232MBX and a PK-88, I would like to use them using a RPi 3 (I have 3) or RPi 3b+ (I h

By Maximo Barawid Jr. ·

Create from 3.0.1? 4 #hampi #raspberrypi

I'm new and didn't download and install the original version of Hampi. I presume it was v 1.0. My question is whether or not I can directly install the latest version or must I install from 1.0 to the

By Mike - KG0P ·

SCU-17 Behind The Raspberry Pi? 11

G'Day To All, Has anyone successfully used a Yaesu SCU-17 USB Interface with a Raspberry Pi ? Pete VK4CCV

By Pete Moscatt ·

Overcoming bad USB cables 5

After a lot of fussing with questionable USB cables and less than 4.8 volts at the far end of the cable I bought one of the little 3 amp Adjustable buck converters off ebay, adjusted the output to 5.3

By Bill P. ·

QSSTV problem 2 #scu-17 #apps #qsstv #sstv

Hi all, i am having a promlem using qsstv. I am runnig Debian 11 bullseye and had no problems installing it. To bad i couldn't find it in the software option but was able to get it with apt-get. The p

By nl13286@... ·

FT-891 reviews

The FT-891 could have been so much better... I am missing the voltage on the main screen. This is very handy because it is suposed to be a portable rig. Also what is the point of having cat with usb a

By nl13286@... ·

HamPi 3.0.1 32-bit (June 2022) Released

Fellow Hams, I am pleased to announce that HamPi 3.0.1, the comprehensive award-winning ham radio software distribution for the Raspberry Pi is now available for public download! There have been over

By Dave Slotter, W3DJS ·

Display enlargement 15

Good afternoon, everyone!! Please let this Email message introduce me to you. I'm Ernie Rader, W5NH, and I'm using a Raspberry Pi 400 that I've had for several months. Within the last few days, I've i

By Ernie Rader ·

Rpi with wine and winlink express (RMS Express.exe) #apps

Winlink (RMS Express.exe), works reasonably well. As a background, I have installed RMS Express.exe under wine under box86 on a Rpi 4. RMS Express works pretty well. But I have a problem, and wonderin

By wf5w@... ·

Hello group! 3 #pi #hdmi

Hi! I'm installed Hamclock on my Raspberry 3+ on Bullseye but I can't make the HDMI works. After try a lot of parameter combinations I decide to go back to Buster and did the same installation but sti

By Jorge ·

Pi Zero 2W Needed 13 #raspberrypi

I have collected all the parts for my first Pi Zero W project. I have learned that the Pi Zero W might not have the horsepower for my DigiPi project. So, I am looking for a Pi Zero 2w just in case. If

By Dale Hardin KS4NS ·

HamPi @ Atlanta Hamfest

Hello fellow hams and Raspberry Pi enthusiasts! I'm going to be demonstrating HamPi 3.0 in person at the Atlanta Hamfest next Saturday, June 4, 2022. The event is being held at Jim R. Miller Park in M

By Dave Slotter, W3DJS ·

Connecting to a FT-2600 via the 9-pin data port 8

Is it possible to connect a Yaesu FT-2600 to the pi via the 9-pin data port? I'd like to turn this old radio into an APRS and/or winlink radio.

By Joel - K5RFO ·

Amateur TV Transceiver in the MagPi Magazine

The latest issue of the MagPi Magazine (Issue 118) https://magpi.raspberrypi.com/issues features the Portsdown 4 Digital Amateur TV transceiver (pages 8 - 11). More details can be found here: https://

By Dave G8GKQ ·

Pi Zero W Needed for Project 4

I need a Pi Zero W for a ham radio project. This will be my first foray into Pi and linux, so I am excited to give it a try if I can find one that doesn't break mama's bank. If you have graduated beyo

By Dale Hardin KS4NS ·

Need A Pi-4 4gb or 8gb 3

Does anyone have a Pi-4 4gb or 8gb sitting around that they don’t need ?? Mine suddenly gets ‘ram errors’ and using the eeprom reset software does not help.

By Bill P. ·

HamPi 3.0 32-bit (May 2022) Released

Fellow Hams, I am pleased to announce that HamPi 3.0, the comprehensive award-winning ham radio software distribution for the Raspberry Pi is now available for public download just prior to ! There ha

By Dave Slotter, W3DJS ·

RPi0 / D72 Project 5

Greetings, Goal: Pass the D72 TNC data to/from a device over Bluetooth. Question: Is socat the best way to pass data? Thank you! Best regards, Fred N7FMH This email has been checked for viruses by Ava

By Fred Hillhouse ·

compile from source 6

Good evening, I have been trying to compile TQSL 2.6.1 from the tar. To date, I have failed. Is there a "step-by-step" procedure available somewhere? -- Jay WB2QQJ

By Jay Lijoi ·