|
sticky
A gentle reminder. 2 messages
At the bottom of each email sent out from groups.io is a link to mute a topic. If a topic is not interesting to you, please feel free to use that link to mute it and you will not receive emails concer
At the bottom of each email sent out from groups.io is a link to mute a topic. If a topic is not interesting to you, please feel free to use that link to mute it and you will not receive emails concerning that thread. Thank you.
By
John Hays - K7VE / WRJT-215
·
|
|
Connecting to a FT-2600 via the 9-pin data port 7 messages
Is it possible to connect a Yaesu FT-2600 to the pi via the 9-pin data port? I'd like to turn this old radio into an APRS and/or winlink radio.
|
Is it possible to connect a Yaesu FT-2600 to the pi via the 9-pin data port? I'd like to turn this old radio into an APRS and/or winlink radio.
|
By
Joel - K5RFO
·
|
|
Pi Zero W Needed for Project 4 messages
I need a Pi Zero W for a ham radio project. This will be my first foray into Pi and linux, so I am excited to give it a try if I can find one that doesn't break mama's bank. If you have graduated beyo
|
I need a Pi Zero W for a ham radio project. This will be my first foray into Pi and linux, so I am excited to give it a try if I can find one that doesn't break mama's bank. If you have graduated beyo
|
By
Dale Hardin KS4NS
·
|
|
Need A Pi-4 4gb or 8gb 3 messages
Does anyone have a Pi-4 4gb or 8gb sitting around that they don’t need ?? Mine suddenly gets ‘ram errors’ and using the eeprom reset software does not help.
|
Does anyone have a Pi-4 4gb or 8gb sitting around that they don’t need ?? Mine suddenly gets ‘ram errors’ and using the eeprom reset software does not help.
|
By
Bill P.
·
|
|
HamPi 3.0 32-bit (May 2022) Released
Fellow Hams, I am pleased to announce that HamPi 3.0, the comprehensive award-winning ham radio software distribution for the Raspberry Pi is now available for public download just prior to ! There ha
|
Fellow Hams, I am pleased to announce that HamPi 3.0, the comprehensive award-winning ham radio software distribution for the Raspberry Pi is now available for public download just prior to ! There ha
|
By
Dave Slotter, W3DJS
·
|
|
RPi0 / D72 Project 5 messages
Greetings, Goal: Pass the D72 TNC data to/from a device over Bluetooth. Question: Is socat the best way to pass data? Thank you! Best regards, Fred N7FMH This email has been checked for viruses by Ava
|
Greetings, Goal: Pass the D72 TNC data to/from a device over Bluetooth. Question: Is socat the best way to pass data? Thank you! Best regards, Fred N7FMH This email has been checked for viruses by Ava
|
By
Fred Hillhouse
·
|
|
compile from source 6 messages
Good evening, I have been trying to compile TQSL 2.6.1 from the tar. To date, I have failed. Is there a "step-by-step" procedure available somewhere? -- Jay WB2QQJ
|
Good evening, I have been trying to compile TQSL 2.6.1 from the tar. To date, I have failed. Is there a "step-by-step" procedure available somewhere? -- Jay WB2QQJ
|
By
Jay Lijoi
·
|
|
Is this group for 4? 3 messages
Hi. Is this group for Pi for Ham Radio, or for Pi 4 Ham Radio? I use lots of 1, 2, 3, and Zero but not 4s. -Pres W2PW
|
Hi. Is this group for Pi for Ham Radio, or for Pi 4 Ham Radio? I use lots of 1, 2, 3, and Zero but not 4s. -Pres W2PW
|
By
Pres W
·
|
|
My Raspberry Pi 3B+ - Will Not Boot 7 messages
Hi this Pi no longer will Boot from any SD card for any Pi OS distribution. Reformatting the SD cards has no effect and writing the OS fails to read much less boot it. The Red LED is lit for power ind
|
Hi this Pi no longer will Boot from any SD card for any Pi OS distribution. Reformatting the SD cards has no effect and writing the OS fails to read much less boot it. The Red LED is lit for power ind
|
By
William E. Artelt
·
|
|
TNC-96K PITNCParamsApr18.zip 4 messages
I just got a TNC-96K and flashed it. I am trying to run the makeit so that I can run it from my raspberry pi. However this is the error that I keep getting. pitnc_getparams.c: In function ‘main’: pitn
|
I just got a TNC-96K and flashed it. I am trying to run the makeit so that I can run it from my raspberry pi. However this is the error that I keep getting. pitnc_getparams.c: In function ‘main’: pitn
|
By
Chris Andrist
·
|
|
SKCCLogger 3 messages
Does anyone have SKCCLogger working on 64 bullseye? If so, would you be kind enough to share how it's done. -- Jay WB2QQJ
|
Does anyone have SKCCLogger working on 64 bullseye? If so, would you be kind enough to share how it's done. -- Jay WB2QQJ
|
By
Jay Lijoi
·
|
|
Appalachian Trail Golden Packet event - July 16
The Appalachian Trail Golden Packet event is an annual tradition started by WB4APR in 2009. The goal is to set up 15 temporary VHF/UHF APRS stations on mountain tops, along the Appalachian Trail, and
|
The Appalachian Trail Golden Packet event is an annual tradition started by WB4APR in 2009. The goal is to set up 15 temporary VHF/UHF APRS stations on mountain tops, along the Appalachian Trail, and
|
By
WB2OSZ
·
|
|
SDR on Raspberry -Pi 12 messages
Has anyone you a SDR on Raspberry -Pi
|
Has anyone you a SDR on Raspberry -Pi
|
By
JAMES COX
·
|
|
Display enlargement 8 messages
Good afternoon, everyone!! Please let this Email message introduce me to you. I'm Ernie Rader, W5NH, and I'm using a Raspberry Pi 400 that I've had for several months. Within the last few days, I've i
|
Good afternoon, everyone!! Please let this Email message introduce me to you. I'm Ernie Rader, W5NH, and I'm using a Raspberry Pi 400 that I've had for several months. Within the last few days, I've i
|
By
Ernie Rader
·
|
|
New Raspberry Pi OS installations no longer create the "pi" user account 23 messages
Hey Everyone, I saw this today and thought it would be good to send this email out. It seems that the Raspberry Pi Foundation has changed their published Bullseye image to NO LONGER create the "pi" us
|
Hey Everyone, I saw this today and thought it would be good to send this email out. It seems that the Raspberry Pi Foundation has changed their published Bullseye image to NO LONGER create the "pi" us
|
By
David Ranch
·
|
|
Bullseye etc. 3 messages
Hi RPi/Ham pals: Bullseye resides entirely on a SD card! I suggest you get a new SD card and give it a try. If you don’t like it you can put your old SD card /OS back in. BTW: I made the mistake of ma
|
Hi RPi/Ham pals: Bullseye resides entirely on a SD card! I suggest you get a new SD card and give it a try. If you don’t like it you can put your old SD card /OS back in. BTW: I made the mistake of ma
|
By
Charles Young
·
|
|
QSO Today Podcast Episode 395 - Dave Slotter - W3DJS
Hello fellow hams! I am excited to announce that I was recently interviewed by Mr. Eric Guth, 4Z1UG / WA6IGR, host of the QSO Today Audio Podcast and the episode is now up for download! This isn't jus
|
Hello fellow hams! I am excited to announce that I was recently interviewed by Mr. Eric Guth, 4Z1UG / WA6IGR, host of the QSO Today Audio Podcast and the episode is now up for download! This isn't jus
|
By
Dave Slotter, W3DJS
·
|
|
Reconnect Bluetooth Paired RPi to NDROID phone? 3 messages
I’ve figured out how to pair my Pixel 5a to my Raspberry Pi Zero 2W running Direwolf. Once disconnected, how do I connect them again? My phone’s Previously connected list shows my RPi but the Connect
|
I’ve figured out how to pair my Pixel 5a to my Raspberry Pi Zero 2W running Direwolf. Once disconnected, how do I connect them again? My phone’s Previously connected list shows my RPi but the Connect
|
By
Charles Jessee
·
|
|
Sabrent with the 817nd 4 messages
Okay, I have a perfect setup with a signalink with a Pi4 with my 897D and with my 857D, and now I'm trying to set up my 817ND with a sabrent usb audio adapter and a pi3. I have a z817 tuner also in th
|
Okay, I have a perfect setup with a signalink with a Pi4 with my 897D and with my 857D, and now I'm trying to set up my 817ND with a sabrent usb audio adapter and a pi3. I have a z817 tuner also in th
|
By
Pat ....
·
|
|
Rasp Pi 4 Source ? 12 messages
Rasp Pi 4 w 4 gb of Ram. Tough to find, does anyone know of a source that has in stock ? Paul
|
Rasp Pi 4 w 4 gb of Ram. Tough to find, does anyone know of a source that has in stock ? Paul
|
By
w2eck
·
|
