|
Screen size of fldigi on a small (3.5") gpio display 2 messages
I have properly installed a small display on the pi zero; it displays perfectly on boot up and all the standard apps in raspian display well; however, when I installed fldigi on the zero, the display
I have properly installed a small display on the pi zero; it displays perfectly on boot up and all the standard apps in raspian display well; however, when I installed fldigi on the zero, the display
|
By Charles Albert
·
|
|
None of my Pi's are showing on network _ HELP 14 messages
I need your help, Pi gurus. After I changed my router none of the PI's that I use for Ham Radio show up. I know what you are about to say - you have to change the settings for the network. Here's what
I need your help, Pi gurus. After I changed my router none of the PI's that I use for Ham Radio show up. I know what you are about to say - you have to change the settings for the network. Here's what
|
By Grover Cleveland
·
|
|
USB Codecs 6 messages
Thank you for reading my first post. I had the digital modes working perfectly until I replaced my radio and interface with an FT-991A. Now a USB codec is not showing in the list of audio devices. FS8
Thank you for reading my first post. I had the digital modes working perfectly until I replaced my radio and interface with an FT-991A. Now a USB codec is not showing in the list of audio devices. FS8
|
By Phil
·
|
|
Configuring W3DJS V1.0 Direwolf questions. 13 messages
I have the W3DJS V1.0 package running on a Raspberry Pi, 3. So far, so good, I have WSJT-x and Fldigi running. I'd like to set up Direwolf so that it works something like my old KPC-2 Kantronics TU. W
I have the W3DJS V1.0 package running on a Raspberry Pi, 3. So far, so good, I have WSJT-x and Fldigi running. I'd like to set up Direwolf so that it works something like my old KPC-2 Kantronics TU. W
|
By Dennis Blanchard
·
|
|
Fldigi on Pi4 after update and upgrade 8 messages
I am running flidigi 4.1.14, flamp 2.2.04, Flrig 1.3.51 on my Pi4B with TS 2000 I has been a while since I did an update and upgrade on my Pi4 so i did that last night. Now when I hit my Macro it begi
I am running flidigi 4.1.14, flamp 2.2.04, Flrig 1.3.51 on my Pi4B with TS 2000 I has been a while since I did an update and upgrade on my Pi4 so i did that last night. Now when I hit my Macro it begi
|
By Walter
·
|
|
fldigi on raspberry pi 3 B + 2 messages
Well, fellow hams, I know you think I'm crazy but here goes; loaded fldigi on 3 different pis with the same result. I am using a signalink USB device and NO rig control, using a ICOM 737. The fldigi d
Well, fellow hams, I know you think I'm crazy but here goes; loaded fldigi on 3 different pis with the same result. I am using a signalink USB device and NO rig control, using a ICOM 737. The fldigi d
|
By Charles Albert
·
|
|
Fldigi TX off freq on waterfall on only 20m 2 messages
OK so here is a problem I have had for a long while. When I use Fldigi on my TS-2000 and the Pi4B setup When I TX the signal is low by about 500 hz. But this is only the case on 20m. on 80m and 40m it
OK so here is a problem I have had for a long while. When I use Fldigi on my TS-2000 and the Pi4B setup When I TX the signal is low by about 500 hz. But this is only the case on 20m. on 80m and 40m it
|
By Walter
·
|
|
fldigi on raspberry pi 3 B + 9 messages
Downloaded fldigi from the raspberry pi site, it decodes PSK31 beautifully using the Signalink USB, but I cannot seem to get the TX function to PTT. Any thoughts???
Downloaded fldigi from the raspberry pi site, it decodes PSK31 beautifully using the Signalink USB, but I cannot seem to get the TX function to PTT. Any thoughts???
|
By Charles Albert
·
|
|
Dragon w/IC-7100 Icom Packet/ARDOP/Packet 2 messages
I'm working on a SCS-7800 Dragon. The OS is Raspi-OS on a PI 3B+, latest BPQ(20.1) connected to a IC-7100 Icom. PacTor, ARDOP, and packet; all connect and send receive traffic to CMS(gateway). Scan st
I'm working on a SCS-7800 Dragon. The OS is Raspi-OS on a PI 3B+, latest BPQ(20.1) connected to a IC-7100 Icom. PacTor, ARDOP, and packet; all connect and send receive traffic to CMS(gateway). Scan st
|
By Jim WB9QPM
·
|
|
TNC-96K with HT 3 messages
Has anyone tried/succeeded using a TNC-96K with an HT? Or thoughts/ideas how to do so? I'm hoping to be able to deploy the PiGate with HT as an ultra-portable, low-power-use ARES/EmComm solution. I ca
Has anyone tried/succeeded using a TNC-96K with an HT? Or thoughts/ideas how to do so? I'm hoping to be able to deploy the PiGate with HT as an ultra-portable, low-power-use ARES/EmComm solution. I ca
|
By Martin
·
|
|
Welcome to RaspberryPi-4-HamRadio@groups.io
Hello all. Thanks for starting this group. I have been tinkering with the Pi using WSJT-X, ARDOP and soundcard AX.25 packet with JNOS. It has been a lot of fun. Regards, Chirs KQ6UP
Hello all. Thanks for starting this group. I have been tinkering with the Pi using WSJT-X, ARDOP and soundcard AX.25 packet with JNOS. It has been a lot of fun. Regards, Chirs KQ6UP
|
By Chris Maness
·
|
|
FIRST CONTACTS
#pi
Made my first contacts with KX3 5 watts and Rasp Pi4 with HamPi it worked great on FT8 working portable from daughter home in Maryland. Will be on the air alot more now as long as the CCR police don't
Made my first contacts with KX3 5 watts and Rasp Pi4 with HamPi it worked great on FT8 working portable from daughter home in Maryland. Will be on the air alot more now as long as the CCR police don't
|
By Edwin Vonderbeck
·
|
|
Autogrid on WSJTx
Hi there, Is there some ready made solution for an RPI that will work WSJTX-X's Autogrid function for portable RPIs in the field? That seems like such an obvious thing for someone to create for the RP
Hi there, Is there some ready made solution for an RPI that will work WSJTX-X's Autogrid function for portable RPIs in the field? That seems like such an obvious thing for someone to create for the RP
|
By Thomas Tumino
·
|
|
box of TNC-PI cheap 5 messages
I have box of many TNC-PI. See the photo. http://torborg.com/temp/tnc-pi-and-stuff-img-1188.jpg We are no longer adding TNC-PI to the NCPACKET network so these are surplus to my needs. The person who
I have box of many TNC-PI. See the photo. http://torborg.com/temp/tnc-pi-and-stuff-img-1188.jpg We are no longer adding TNC-PI to the NCPACKET network so these are surplus to my needs. The person who
|
By Tadd KA2DEW in NC
·
|
|
I have two TNCPI boards 4 messages
I have two TNCPi boards, one factory built, the other was assembled from the kit. Both work. I also have a case for a PI3B. You can have everything for $60 shipped USPS to lower 48 states
I have two TNCPi boards, one factory built, the other was assembled from the kit. Both work. I also have a case for a PI3B. You can have everything for $60 shipped USPS to lower 48 states
|
By dkc2030@...
·
|
|
Now that coastal Chipworks is gone 61 messages
Anyone have any info on tnc pi kits now that John at Coastal Chipworks has folded? I need two more for a project I’m doing to integrate our current county emcomm packet network through mesh net Dan Da
Anyone have any info on tnc pi kits now that John at Coastal Chipworks has folded? I need two more for a project I’m doing to integrate our current county emcomm packet network through mesh net Dan Da
|
By Dan Dicke
·
|
|
USB GPS receiver software 2 messages
Given that I have a USB GPS receiver is there a program for the pi for displaying/syncing time? I would like to run the FT modes from areas without internet access and need a good sync. -- μολὼν λαβέ
Given that I have a USB GPS receiver is there a program for the pi for displaying/syncing time? I would like to run the FT modes from areas without internet access and need a good sync. -- μολὼν λαβέ
|
By
Patricia Wilson
·
|
|
WSJT performance 32 bit vs 64 bit OS 2 messages
Has anyone installed WSJT for a Pi 64 bit OS, and if so how does performance compare vs a 32 bit OS like the present Raspbian? Thanks.
Has anyone installed WSJT for a Pi 64 bit OS, and if so how does performance compare vs a 32 bit OS like the present Raspbian? Thanks.
|
By John Records
·
|
|
Wsjt-x not showing up in correct group on my raspberry pi
i am trying to install wsjt-x on my raspberry pi b, it is not showing up under sound and video or ham radio group, but i can get it to go using the run command would like it listed correctly in one of
i am trying to install wsjt-x on my raspberry pi b, it is not showing up under sound and video or ham radio group, but i can get it to go using the run command would like it listed correctly in one of
|
By tomv
·
|
|
DRAWS activation 11 messages
Hi everybody, I just got the HamPi to work on a raspberry pi 3b+. Since I do have a DRAWS hat on top of it I would like to activate it. So I followed the instructions. I uncommented the lines in the /
Hi everybody, I just got the HamPi to work on a raspberry pi 3b+. Since I do have a DRAWS hat on top of it I would like to activate it. So I followed the instructions. I uncommented the lines in the /
|
By
Rico Abagnale
·
|