I’ve done the archive search and the solutions provided don’t seems to be working. Pi 4 with the latest IOS Using Jason’s, KM4ACK’s directions, no luck Using OH8STN’s directions, no luck The only diff

Attention All Hams Using Raspberry Pi For Ham Radio: I am pleased to announce that HamPi 1.1 is now available for public download! Please use the attached BitTorrent file to make it easier for everyon

Hello All, I have kept looking for the $10 TI DSP board and tonight I found an outfit with 100 in stock and another with 187. Don't like the looks of the first outfit, U.S. based but 42 days before sh

I have successfully installed fldigi on the Raspberry Pi 3B+, and it receives fine, but I finally learned that in order to tx, the device file should be /dev/ttyUSB0. I have unsuccessfully tried the i

Fellow Hams and Raspberry Pi Enthusiasts, I am pleased to announce the release of version 2 of the Raspberry Pi Ham Radio Image I've been working on. It contains extensive amount of pre-compiled, pre-

I have an FT-891 which has a USB port and I would like to find out if there is a good program for communicating with it. Either command line or GUI. TIA. -- μολὼν λαβέ 73 de WB8DXX Patricia Wilson Apa

Hello group! I live in Vegas and am realizing that the iGate network here is severely lacking. With your help I want to set up a Rx/Tx iGate using Raspberry Pi. I just ordered my Pi 4 starter kit and

Has anyone seen a build that uses say a Pi4b to work simultaneously as a DMR radio hotspot and to work HF digital modes? If not, can you think of any reason it would not work or would not be a good id

Three years ago I wrote a Band Decoder freeware app that communicates using TCP packets between a Windows GUI console and a Raspberry Pi CLI controller. Has been working fine here and at a few dozen Q

Hi All, I have set up a new iGate/Digipeater as KC3ARY-7. It all seems to going well using a Raspberry PI with a Kenwood rig. You can see my documentations, such as it is, here. The one remaining oddi

39th Annual ARRL / TAPR Digital Communications Conference (DCC) THIS WEEK - Friday, September 11th & Saturday, 12th DCC will be a virtual conference using Zoom video communications and YouTube video-s

Hi All, Putting together the tower of Babel for all my digital needs LOL. Using my 8GB Pi4, TNC-pi9K6, FE-PI audio board, and a Nexus DR-X dual radio controller. It allows 2 radios to be used with the

I have just re-flashed Buster and installed Build-a-pi. flrig can't configure the USB port with error "Transceiver is not responding" I tried flrig on the laptop and all is OK. ls -sal *USB* 0 crw-rw-

As the TARPN project in central North Carolina migrates from TNC-Pi's to NinoTNCs, I am selling my inventory of TNC-Pi parts: 1. One assembled and populated TNC-Pi, green PCB version 2.3 TARPN. It was

Hello everyone. I'm using for the first time a Raspberry-Pi 4 that I want to use to do all the digital modes I'm involved with: Winlink, JS8, PSK31. On learning how to use the Raspbian environment I e

I have a TT4 connected to a Raspberry Pi running PAT Winlink client and ax.25 and kissattach. I can connect the TT4 to PAT client when I use the kissattach command. After I power up my Raspberry Pi, t

From: Database Weekly <subscriptions@...> Sent: Saturday, September 5, 2020 7:05 AM To: renedewit@... <renedewit@...> Subject: Docker 101, Adaptive Joins, and more (Database Weekly 2020-09-05) Databas

Has anybody use a USB soundcard to decode using FoxTelem ? On mine I can see it detected on starting FoxTelem.jar, but not shown / available on the dropdown source menu. This is on Rpi 3B running head

Hello! I am using direwolf with xastir, Firts I was using plughw:1,0 configuration and direwolf worked without any problem, but the problem is Alsa don't let me use the soundcard with other applicatio

I am using raspberry pi zero w with success, however, it is oversized and I can't see the whole screen. Is there any quick and dirty way to reduce the display so it fits a 3.5 inch screen?