|
sticky
A gentle reminder.
At the bottom of each email sent out from groups.io is a link to mute a topic. If a topic is not interesting to you, please feel free to use that link to mute it and you will not receive emails concer
At the bottom of each email sent out from groups.io is a link to mute a topic. If a topic is not interesting to you, please feel free to use that link to mute it and you will not receive emails concerning that thread. Thank you.
By John D Hays - K7VE
·
|
|
HSMM-Pi 2 messages
Hello All: After having worked with HSMM Mesh, I have seen an apparently-older Pi image for something called the HSMM-Pi, which implements a mesh network node on a Raspberry Pi with WIFI added for the
|
Hello All: After having worked with HSMM Mesh, I have seen an apparently-older Pi image for something called the HSMM-Pi, which implements a mesh network node on a Raspberry Pi with WIFI added for the
|
By Jeff Marden
·
|
|
FW: [RaspberryPi-4-HamRadio] Long serial cable issue 14 messages
If your USB cable is 20’ to the adapter, that would likely be a problem. If your RS232 cable is 20’, that should not be an issue unless you are running at a very high baud rate. A method for troublesh
|
If your USB cable is 20’ to the adapter, that would likely be a problem. If your RS232 cable is 20’, that should not be an issue unless you are running at a very high baud rate. A method for troublesh
|
By Fred Hillhouse
·
|
|
Long serial cable issue 10 messages
I'm running (or trying to run) an MFJ-1270B from an Pi 3 B+ and an IO Gear serial adaptor. However, when I go to a long cable, approximately 20 feet, I don't get any communications. A six foot cable w
|
I'm running (or trying to run) an MFJ-1270B from an Pi 3 B+ and an IO Gear serial adaptor. However, when I go to a long cable, approximately 20 feet, I don't get any communications. A six foot cable w
|
By dtmenges@...
·
|
|
Long serial cable issue, clues
There have been many good replies to the thread, but I can see room for confusion still, if Dave doesn't have good experience with RS-232. (Based on the framing of the question, he might not...) In th
|
There have been many good replies to the thread, but I can see room for confusion still, if Dave doesn't have good experience with RS-232. (Based on the framing of the question, he might not...) In th
|
By Zonker Harris
·
|
|
Long serial cable issue
Try beeping out the 20 foot cable and compare it to the 6 foot cable. As others have said, 20 feet is trivial for 4800 baud. My guess is the 20 foot cable isn’t wired right for your application. Clark
|
Try beeping out the 20 foot cable and compare it to the 6 foot cable. As others have said, 20 feet is trivial for 4800 baud. My guess is the 20 foot cable isn’t wired right for your application. Clark
|
By Clark Martin
·
|
|
Long serial cable issue 2 messages
At the bottom of your email and unsubscribe yourself! You receive all messages sent to this group. View/Reply Online (#12842) | Reply To Group | Reply To Sender | Mute This Topic | New Topic Your Subs
|
At the bottom of your email and unsubscribe yourself! You receive all messages sent to this group. View/Reply Online (#12842) | Reply To Group | Reply To Sender | Mute This Topic | New Topic Your Subs
|
By Fred Hillhouse
·
|
|
link 5 messages
Anyone have a link to the torrent that is not on Google? Google keeps insisting on my allowing third-party cookies for the download but I don’t allow access to Google from this computer. Every time I
|
Anyone have a link to the torrent that is not on Google? Google keeps insisting on my allowing third-party cookies for the download but I don’t allow access to Google from this computer. Every time I
|
By Floyd Larck, KK3Q
·
|
|
The Trilby Hat... 3 messages
Hello, I hope this is the right place to ask this. Is it anyone here who use the Trilby Hat from Kinetic? I don't have it. yet, that's why I ask. If so, what do you think about it? Thanks Best regards
|
Hello, I hope this is the right place to ask this. Is it anyone here who use the Trilby Hat from Kinetic? I don't have it. yet, that's why I ask. If so, what do you think about it? Thanks Best regards
|
By Tobbe
·
|
|
Camera Module Help 4 messages
Friends, ya'll helped me select a RasPi-related Xmas gift for my 12 year old grandson...he's really enjoying the RasPi journey. For his birthday, he wants a camera module. Question: His RasPi4B uses a
|
Friends, ya'll helped me select a RasPi-related Xmas gift for my 12 year old grandson...he's really enjoying the RasPi journey. For his birthday, he wants a camera module. Question: His RasPi4B uses a
|
By Bob
·
|
|
KX3 Raspberry Pi 4 USB Soundcard Issues 4 messages
Morning. Currently running a KX3 with a Rpi4 using KM4ACK's Build-A-Pi image. I have the radio tied to the pi with a Sabrent USB soundcard dongle for audio in/out. It was working fine for a couple of
|
Morning. Currently running a KX3 with a Rpi4 using KM4ACK's Build-A-Pi image. I have the radio tied to the pi with a Sabrent USB soundcard dongle for audio in/out. It was working fine for a couple of
|
By Matt Cenatiempo
·
|
|
AEA Packratt TNC use with a Raspberry pi. 3 messages
Yesterday I was able to extract a copy of PC-Pakratt II from a 5.25" floppy. And also got both dosbox and faux86 to work on a pi3 and the only remaining obstacle is the Rs-232 serial communication bet
|
Yesterday I was able to extract a copy of PC-Pakratt II from a 5.25" floppy. And also got both dosbox and faux86 to work on a pi3 and the only remaining obstacle is the Rs-232 serial communication bet
|
By Mike Burch
·
|
|
usb power hub 22 messages
I am trying to power multiple Raspberry pi model 4s. I would like to use some kind of usb hub for this. Can anyone recommend one that will supply the necessary 3 amps to more than 1 Pi? No other devic
|
I am trying to power multiple Raspberry pi model 4s. I would like to use some kind of usb hub for this. Can anyone recommend one that will supply the necessary 3 amps to more than 1 Pi? No other devic
|
By tacs
·
|
|
N4CVX here in Brentwood, TN 14 messages
#tnc
#hampi
#networking
I've been active with packet since 1976, worked on the US Army technical team and developed packet system for Army tactical radios (AN/PRC-77 family). Located in Brentwood, TN. Hope to get more Hams i
|
I've been active with packet since 1976, worked on the US Army technical team and developed packet system for Army tactical radios (AN/PRC-77 family). Located in Brentwood, TN. Hope to get more Hams i
|
By n4cvx@...
·
|
|
PiGate Updates Availability 19 messages
I have a PiGate with the TNCPi 1200 running version 2.1 of the PiGate image. Going to the Update setting shows there is an update available. I try to update and it fails. Another PiGate with a TNCPi 9
|
I have a PiGate with the TNCPi 1200 running version 2.1 of the PiGate image. Going to the Update setting shows there is an update available. I try to update and it fails. Another PiGate with a TNCPi 9
|
By N3RDR
·
|
|
OT mail Re: [RaspberryPi-4-HamRadio] Berryboot 3 messages
On 2021-01-04 9:20 p.m., Tony via groups.io wrote: > On 1/4/21 9:10 AM, Teton Amateur Radio Repeater Association (TARRA) wrote: >> I don't understand what this is supposed to be telling me? It would >
|
On 2021-01-04 9:20 p.m., Tony via groups.io wrote: > On 1/4/21 9:10 AM, Teton Amateur Radio Repeater Association (TARRA) wrote: >> I don't understand what this is supposed to be telling me? It would >
|
By Charles MacDonald VA3CPY
·
|
|
Berryboot 7 messages
Has anyone tried to install Berryboot on a pi 4 8gb and then load both HamPi and Build A Pi so they could switch between programs to see which they liked better for certain situations? Bryan
|
Has anyone tried to install Berryboot on a pi 4 8gb and then load both HamPi and Build A Pi so they could switch between programs to see which they liked better for certain situations? Bryan
|
By Bryan
·
|
|
Amazing bang for the buck!
I just revisited HamPi with 1.2 after being away from it since August. I hadn’t run it on a Pi4 previously. Wow. I an amazed at how well it works for a remote station. I also installed Mumble for audi
|
I just revisited HamPi with 1.2 after being away from it since August. I hadn’t run it on a Pi4 previously. Wow. I an amazed at how well it works for a remote station. I also installed Mumble for audi
|
By Don Melcher
·
|
|
Ham Pi on Raspberry Pi 400 10 messages
I have a new RP400 I'm trying to use with Hampi v 1.0. Running the software that came with the computer, I have time/date updates, wifi and software updates. Running Hampi 1.0, I don't get any of that
|
I have a new RP400 I'm trying to use with Hampi v 1.0. Running the software that came with the computer, I have time/date updates, wifi and software updates. Running Hampi 1.0, I don't get any of that
|
By Bill Harden
·
|
|
HamPi and Rigctl
I am have a really difficult time with other programs, logging to be specific, and rig control using HamPi V2.1a. flrig works fine, but the logging programs are buggy. One issue maybe the version of h
|
I am have a really difficult time with other programs, logging to be specific, and rig control using HamPi V2.1a. flrig works fine, but the logging programs are buggy. One issue maybe the version of h
|
By Kevin Utzy
·
|
