Topics

Tnc-pi9k6 params


N5XMT
 

Does anyone have a full list of what each of the setparams/getparams is?  I know 15 2 is a reset, and on the old tnc-pi, 15 3 made it send the 2 tones 1 at a time for 5 seconds each.  The original tnc-pi also mentions a command param of 14, but none of the docs list all available parameters.
Thanks


John Wiseman
 

Zero and 12 aren’t used (they are used for KISS Data frames), The other
values up to 13 are shown in the pitnc_getparams response. 14 isn’t used. 15
1 is used by pitnc_getparams to read the parameters from the TNC, 15 2 and 3
are as mentioned below.

73,
John

________________________________________
From: RaspberryPi-4-HamRadio@groups.io
[mailto:RaspberryPi-4-HamRadio@groups.io] On Behalf Of N5XMT
Sent: 21 July 2020 16:28
To: RaspberryPi-4-HamRadio@groups.io
Subject: [RaspberryPi-4-HamRadio] Tnc-pi9k6 params

Does anyone have a full list of what each of the setparams/getparams is?  I
know 15 2 is a reset, and on the old tnc-pi, 15 3 made it send the 2 tones 1
at a time for 5 seconds each.  The original tnc-pi also mentions a command
param of 14, but none of the docs list all available parameters.
Thanks