You need to have two things to log in; username and password. So why provide half of what they need? It's your system, do as you like. Mick - W7CAT

Leaves a door for the hackers to come in. Mick - W7CAT

If you use some type over regulating system to drop it down to 5V, keep your 5V lead length as short as you can. I think mine are about three inches long. Mick - W7CAT

You may want to take into consideration the legally of this. Amateur radio is supposed to be a two-way radio service. Mick - W7CAT

I wasn't trying to be harsh, just a couple things to keep in mind. If the subject was about what you were talking about, you may get some others jumping in. Also, if later on someone tries doing a sea

Please change your subject since you hijacked the original post and are now talking about something different. Mick - W7CAT

". . . more than one way to skin a cat" Hey, what did I do to you? Mick - W7CAT

Generally speaking you shouldn't have any issues. Image another SD card and give it a try, you aren't going to hurt anything. Mick - W7CAT

I have 4 new Pi 4 on the way. I was going to go with the 3B but when I could buy the 4 for less money it was a no brainer for me. On my wish list, I wish the Pi would also have audio in as well as out

I don't like to make "permanent" modifications to something that I may have a use for somewhere else some time. And since I have plenty of old disk drive ribbon cables, it is easy enough to use a 40 p

Both pins 2 & 5 are fixed levels. But pin 5 doesn't have the de-emphasis that you need to have. Mick - W7CAT

Okay, I went through and got it all installed and setup. But . . . it kills the network on the Pi. Even though I can connect with a wireless device to the hotspot, there isn't any internet because the

I would guess the level you would have that you would need to use the line in. In broadcast, if there was only going to be one channel used, the left channel was standard. Mick - W7CAT

I have to wonder what an aluminum case will do to the on-board WiFi signal. Mick

Hello Group, I have a project that I am working on and the program hasn't been updated since 2014. I'm not having good luck with running it on the newer operating systems. I am wondering if someone ma

It wouldn't be the first time I did something upside down or backwards : ) Mick - W7CAT

You have your pins wrong. Pin 2 is mic in and pin 5 is Flat TX audio in. Mick - W7CAT

If your battery voltage is getting below about 7 volts when trying to start, well you probably aren't going to start. I had thought about using something like this with one of those 10F capacitor bank

Just click on the "email recall" and no one will see it. Mick - W7CAT

Since this one looks interesting and my message for different groups have been getting bounced (so far I think just Yahoo), figured I would give this a try. Mick - W7CAT