I've searched but cannot find the method to resize HamClock so it fits better on the official 7" Pi screen. Thanks, K7TP

Solved - somewhat. This was a tortuous road to travel but I'm 2/3 there. The Jumbospot had setup its own wifi hotspot on some unknown IP. This is what happens automatically when the Pi Zero can't log

Here is just one part of the issue: The router was not physically changed but the names and passwords for the WiFi were. The router's dhcp is working fine with everything else on the network. With the

I need your help, Pi gurus. After I changed my router none of the PI's that I use for Ham Radio show up. I know what you are about to say - you have to change the settings for the network. Here's what

I bought a new heatsink with a couple of fans on board to cool my pi in the hot summer at a remote site. I also want to run a 3.5" screen at the same time but this plugs on to the GPIO, covering all t

Actually none of the solutions presented worked and I was familiar with most of them. And yes I do understand ssh, etc. It turns out that there are some anomalies when configuring the Pi4 and Jason KM

I got a Pi4 for my birthday and downloaded Buster with desktop etc. (the full version). When I ssh into the pi and enter "startx" I get these errors: pi@new-pi:~ $ (EE) Server terminated with error (1

I did search for this and saw the responses, thank you. In this case the Pi was tried on two other power supplies, each of which were successfully running Pi3b with the 7" screen. When attached to the

I had a spare Pi running my station. At some point I put a new distribution in it and had to put an older card back in. Now, no matter what card I put in the red activity light just blinks! No green l

Ok I read some more. "sudo chronyc sources -v" show it is working properly. Thanks

I discovered a marvelous site noted in the bottom of the OH8STN video on the Pi. This contains complete instructions and all the scripts you will need. This is good because building by hand was diffic

I see that OH8STN uses a tablet to control his Pi which is controlling FLDIGI. When far away from the Interweb how is he doing that? VNC connect needs a router on a LAN to accomplish this. I'm confuse

I am using a Signalink with Buster and the Pi sees the incoming audio just fine - good waterfall on FlDig. But nothing happens on Transmit. I have a radio without PTT on the CIV set so I have to rely

I could either spend hours fussing with it or just burn a new sd card with a fresh image of Raspian. That did it. Working just like it used to. Thanks guys. K7TP

Not sure what to do here. JS8Call fo example overflows the 7" Pi screen such that I cannot press "OK". VNC Viewer on another computer shows the same thing (to be expected I suppose). I don't want to h

I was feeling so proud: installed fldigi and flrig and it went without a hitch (almost). The Pi3b is controlling the radio and the waterfall is full of sounds. TX is working and the tones are clearly

I'm about to set up one of my pi for ham radio but each of my radios uses usb for both audio (Radio has built in sound card) and control. Are any special drivers going to be needed - anything that wil

Interesting. There is nothing in my \boot\config.txt pi3 jessie and an official Raspi 7" touchscreen. Grover K7TP