It's on the list... Everything is on the list. Best idea for several reasons is to just use the newer better hardware radios from the list of supported platforms on ardenmesh.org. https://www.arednmes

Have they been tested at 9600 baud packet? It appears there are caps in the audio paths so that may limit the bandwidth needed. Thanks, Bill

Those were the days. 9k6 packet through a regenerating digital Repeater (not lame bandwidth destroying digipeater) was a thing of beauty to watch in operation. It was not unusual to transfer (FTP) lar

On Thu, Aug 13, 2020, 10:50 PM Tadd KA2DEW in NC via groups.io <tadd@...> wrote: I have box of many TNC-PI. See the photo. http://torborg.com/temp/tnc-pi-and-stuff-img-1188.jpg We are no

Oops. Not a hat. Sorry. Still good soundcard devices.

Wa8lmf reviews a couple including the iMic and this one. http://wa8lmf.net/ham/uca202.htm

HRO generally has one or two single band radios available at a reasonable price: https://www.hamradio.com/detail.cfm?pid=H0-011362 For a list of radios with the mini-din data port: https://groups.io/g

Is there a significant difference between 7zip and plain zip with max compression selected? Standard is better than better!

Why not just use zip which is everywhere.

am trying to work winlink via APRS messaging and have been trying to figure out how the routing works. Did you get it working? https://winlink.org/APRSLink Since APRS is a data flooding system, there

They come and go - I got 3 FePi about a week ago. Just before learning of this new unit.

The ad mentions GPIO so perhaps that covers the PTT issue. I didn't notice if it had transformers which would make it a no go for higher speed digital.

> information for them here: https://www.wvcarc.com/p/tnc-96k-resources.html. Thanks for doing this. It's a lot of work . Is there a radio(radios) that work well for 9600? Will these units support the

You don't get GPS, real time, and two 9600 baud ports with the 20+ year old KPC. Not to mention the ease of running the latest and greatest software. How's the FEC FX-25 working these days on the KPC?

The DRAWS board is designed for 9600 baud which most other sound card interfaces won't handle. In particular, as handy as it is, the Signalink will not work at the higher speed because it has transfor

A little bit more info FWIW. LinBPQ/BPQ32 Netrom also supports a newer similar protocol for which documentation is not easy to find in a quick search. JNOS also support Netrom and INP. Bill

Then, for more than what we pay for the monitors, we can get a nice VESA mount to hold the rPI on the back of the monitor. https://amzn.to/2qLH7rL

Several folks at our recent APRS gathering were using this 16" Spectre 12V monitor. I'm sure I'll have one or two on the shelf at home one of these days. https://amzn.to/31KqB8X 73 Bill

What John said. Signalink has transformers and also, I believe, blocking caps. It will not do 9600 packet and that also eliminates it from some other digital modes. Bill

The cables are already available ... https://hammadeparts.com/shop-for-cables?olsPage=products