The format on the SD card prior to being used in etcher or win32systemimager or dd in Linux is no longer the format of the card after the image is written to it. Those utilities write the image bit by

#etcher #hampi

Check this article: https://www.raspberrypi.org/documentation/installation/sdxc_formatting.md It says that the bootloader on the Pi is unable to boot from exFAT. It provides some advice on how to form

#etcher #hampi

Also the micro HDMI cable I received worked fine out of my case but would not seat properly once the Pi4 was in the case. I had to taper the plastic “square end” slightly .

#etcher #hampi

First, make sure the hdmi monitor is powered on before powering on the pi. Does the green led on the pi come on at all? If not then the SD card is not flashed properly. What brand is the SD card? You

#etcher #hampi

OK. You didn't clarify if the monitor HDMI cable was connected to the HDMI port on the Pi. You just said it was connected. Sent from my Verizon, Samsung Galaxy smartphone

#etcher #hampi

I'm a newbie. Bought a pi4b from Amazon with 8GB. Also bought a 128GB micro-SD card and SunFounder 13.3" HDMI display. Formatted the micro-SD card as ex-FAT using Win 10. Flashed Hampi_v1.1.img using

#etcher #hampi

Thanks! Jerry

#hampi #jtdx

My friend in Florida makes cases for the Pi. These are mostly for the PiGate device, but can be used with any Pi3 or Pi4. The Type 2 case is extended to mount a fan on the end. This works pretty well

#hampi #jtdx

You are correct. You need a "stacking header" from Adafruit, etc. if you want to stack a HAT on top with taller heat sink installed. All of the cooling fan options seem to have a similar problem unles

#hampi #jtdx

https://radiok9kms.blogspot.com/p/computing.html#RPi%20Cooler Argon programmable fan for $9 on amazon

#hampi #jtdx

My RPi 3B+, 3D printed case and Noctua fan. Lots of color choices to use for the case. Chuck KD9DVB

#hampi #jtdx

I got the heatsink from aliexpress.com look for Aluminum Alloy Radiator Protective Case Metal Cooling Shell For Raspberry Pi 3 Model B/B+/2B. I did drill in out to take the 40mm fan. You can get this

#hampi #jtdx

The only drawback on these is the CPU heatsink is to tall to use any HAT on the pi unless you get stackable headers and space the hat up a ways. Otherwise the HAT touches the heatsink and shorts out

#hampi #jtdx

I got my two heatsinks from Amazon for under $4 (USD). The brand is "LoveRPi Performance Heatsink Set for Raspberry Pi 3 B." The USofA URL is https://www.amazon.com/LoveRPi-Performance-Heatsink-Set-Ra

#hampi #jtdx

I like the heatsink. Where'd ya get it ? 73 - Bill KA8VIT

#hampi #jtdx

Here is a new case that looks interesting. (1) DeskPi Pro Set-top Box For Raspberry Pi 4 – DeskPi Store Denis WB8SKP

#hampi #jtdx

Good Morning and tnx all for good suggestions! I maybe start with heatsinks and if not enough I buy Fans. 73 Alf OH6IH Skickat från min Samsung Galaxy-smartphone. -------- Originalmeddelande --------

#hampi #jtdx

Here's something similar: https://www.amazon.com/gp/product/B07VWM4J4L/ Jason KD8FMR

#hampi #jtdx

Is that particular heat-sink commercially available? Jerry

#hampi #jtdx

Hi and tnx fer answer, I got a Raspberry Pi 4 B today, but I maybe should buy heatsinks also. Maybe a fan later if needed. For the Pi 3 B I could get heatsinks and maybe a fan. My power supply for thi

#hampi #jtdx