James, I’m having the same issue with my 9k6. It’s gone deaf. I contacted John at Coastal and he recommended re-flashing the Teensy. All the instructions and links to the utilities are in the 9k6 manu

Hi all, I will start with I'm not a programmer and I'm looking for help with the following I want the ability to control 4 relays from a webpage, this I have achieved with https://www.instructables.co

You're correct, a mis-read on my part. The link is still a valid source of info, however. Ray vk2tv

Greetings, All my Fellow Hams! Hello! I am John Wasciuk, WA8TON, and Activities Coordinator for the ARROW Communication Association in Ann Arbor, Michigan. Every Dayton Hamvention, The ARROW Communica

Try a different power supply. Reload software from a backup, you do backups don't you? Max KG4PID

I am setting a vhf packet station with my Pi3 and Tnc Pi wihich i have been using with YAAC for aprs. We have more than enough digipeaters in our area and I would like to use my setup to linbpq packet

The bpq32.cfg file should exist in the linbpq directory. I can’t remember whether I created it from scratch or if there is a sample to start with. I want to say I found a sample to start with, and sav

Did you try sudo ./linbpq?

Hi, if you just got the pilinbpq executable it will not create bpq32.cfg. You will need to build one. Please see John Wiseman's examples: http://www.cantab.net/users/john.wiseman/Documents/InstallingL

I don't have anything around with the same power plug. And, yes, I do backups. I stated that I had re flashed the card several times.

Okay well that explans it. Thank you.

Posting on the BPQ32 Yahoo Group will get you lot of help and info. Don va7dgp

Yes, I think I am missing the bpq32.cfg file. I would have thought one would be installed when I set the program up. Also the site that I used as a reference says I should use a suitable bpq32.cfg fil

Thanks to all for the help. Looks like another node up and running

Ahhh! That seems to have done the trick. Thank you much.

There is a facility to have an unkey delay. If the transmitter stays keyed after the packet is over, you’d here one of the two modem tones. Could that be it? Tadd / KA2DEW tadd@... Raleigh NC FM05

My FlightAware set up started acting flaky the other day. I swapped the FA out with 2 other dongles. All 3 work from the computer USB. What to do,,, jut get another Pi? Randy W4RTT

Hello Randy, You're going to have to give us a lot more details than "acting flaky" if we're going to be able help you. - Screen capture or take a smartphone picture of the screen showing specific err

The Pi doesn't have a minoror. Pi 3 Model Bv1.2 I would guess it is 4 or 5 years old, not sure. Power supply MO52240E111 made in China as old as the Pi.5.25v @ 2400ma San Disk 16GB Flashed it a couple

Finally got the bpq32.cfg configured and running. Now I have found an odd beap tone at the end of my transmissions. I thought it was a linbpq issue but it also happens when I run aprs. My aprs transmi