I think the OS creates the new drive from unused part of the flash or SD drive. You can tell it to make sure your system uses the whole device. (terminal) sudo raspi-config [enter] The option is in

Good day, all. This may be a bit off topic. However it is a great alternative to direct reception. I am using both a Pi 4B and a Pi 400 for use a a web receiver. I edited the autostart fiie so

Hi Vic, After you flash the card and copy the ssh and suplicant files to the boot partition. Put the card in the pi and apply power to the pi. On first boot it should resize the linux partition and

Thanks for all the replies. I did send a note to Vilros with some questions. I was checking to see if i had any empty MicroSD cards around, and all I had were either double the size or too small. The

Good afternoon, I've been building a portable radio station in a pelican case and it has a raspberry pi for digital modes. I am using Conky to see the pi's stats. I was wondering if it's possible to

Size of the SD card has nothing to do with which Pi it's in, or which version of the PiOS you are using. It's the quality of the card that matters. I have 2 Pi zero W's running 128G SanDisk cards

Use the "Raspberry Pi Imager" software available from the official Web site. It handles all your SD (Flash and SSD as well) tasks to create bootable images. Make sure any USB hub is a powered hub with

I have had power supplies that are too low of current cause same issue, freezing, rebooting etc. if you’ve got another 5VDC supply that has higher amperage, try that. Good luck JP

VIC- Since you have a W10 machine. Eliminate the USB hub, Keyboard and mouse, by plugging it into the W10 machine and test. Is the mouse arrow frozen or is the mouse missing? You really don't know

Which “class” of SD Card are you using? Which brand? I’ve had good luck with the SanDisk Ultra series. De N6UOW

Your SD card is probably bad. Try another. If that doesn't work, then perhaps you have a bad Pi. Try another, they are cheap. This is rare, but I have seen it happen. Let us know how it works

I have a Vitros RP Zero W basic kit that I had in mind to try for some new projects. While far from a programmer, I have some ancient experience in BASIC and FORTRAN and more recently have played with

I had tried it about 6am Eastern standard time. At 8:03 I called their 800 number and they agreed. By 9am Eastern it was fixed. Want lights? pay the electric bill..

The site is up and operational today. Must have been a DNS burp... Perry K4PWO

Worked just fine for me. -- AL M KF5SMH

https://vilros.com/ Worked just now -----------------------------------------From: "Larry Macionski via groups.io" To: RaspberryPi-4-HamRadio@groups.io Cc: Sent: Thursday January 28 2021

It seems to be working from here. Perhaps they already fixed it? Incidentally, I had ordered from them last week and received two Raspberry Pico's a couple days ago. i've been buying their

Went to the site today. It isn't. The substitute screen says it up for renewal or for sale. Maybe someone should call them - I always got the number from the website. Looked like a viable company to

Yes, but same theory with the 3B and 3B+. The way the stacked sockets are made they don't hold any vertical tension on the connectors, so even the standard USB2 pins can have erratic connections On

When he is talking about "the inner 4 pins that the USB3.0 uses." would mean that it is a Pi 4 which has USB 3. Mick - W7CAT