I'm thinking of playing with a GPS on my Pi and I've seen and read references to cgps and xgps, but I can't find if these are apps or services or what. Can anyone help?

Your 7" display will really limit you, unfortunately. Its native resolution is only 800 x 480, whereas most modern displays are closer to full HD (1920x1080). Jason KD8FMR

Anyone what? Mark KD0QYN

Anyone?

Hi Jay, I just went through this a couple weeks ago to load the .15 version on my Pi 4. I use a downloadable script done by Indyham (K3HTK - thanks!). This requires a comfort level with the command

If you have internet just use NTP...

Jay, Unless you know the difference between the latest version (4.1.16) and the version available from the Raspbian package server (4.1.01), and absolutely need the newest features, I would just use

Good evening, Ok, I admit it, I am having trouble figuring out how to install fldigi on my raspberry PI4. I installed through the "add/remove software" feature, but it loaded a relatively old version.

Just a simple RTC chip off the i2C bus. DS3231 or similar. Check out adafruit. They have a selection of several. Get BlueMail for Android On Nov 14, 2020, at 06:21, John KC9OJV <greusel@...> wrote:

I've built a PiHPSDR controller using a Pi 4. John Melton's software is fabulous but I'd also like to run some digital mode applications. How have others created an accurate clock system for Pi that

Hi Eric, Thanks for your comments and I agree that the optimizations are intended for when the compiling for a PI4 is done on a x86 platform; cross compile. I did read in one of my searches that

On APRSDroid I get this error message: Could not connect to PiZero! Please turn on the device and close other Bluetooth connections. It seems my issue it getting the phone paired with the Pi.

When you try to do a BT pairing from your smartphon? to your Raspberry Pi, what command is erroring out and with what error? --David KI6ZHD On 11/11/2020

Hello Larrie, Good to hear you got things working. I would recommend to send an email to on4qz (author of QSSTV) to let him know about this weird behavior (best described

Hi David I solved the issue. I have qsstv running on a laptop under Ubuntu 20.04. In looking at the configuration for the CAT control, I noticed in the hamlib setup besides the field for the radio

I do thank you. This cleared all of my problems. Bill WB4WTN N5XMT wrote on 11/11/20 8:21 PM: -- Sent from Postbox

I have a Raspberry Pi Zero W loaded with Direwolf as a TNC for an HT UV-5R. I would like to use this Pi/Direwolf as a TNC which is much improved over an APRS cable due to the availability of the PTT

Yes. If you run sudo raspi-config from a terminal window, go to advanced settings and resolution and can set it there. If it doesn't give you the option there, edit /boot/config.txt. Uncomment the

Tnx! 73 Bob K4RCG

My RPi works with all but a 12" HDMI monitor I bought off Amazon. It does really crazy things. Sometimes losing Bluetooth connections, or WiFi connection or just freezes. It only does this with this