Date   

Compile problem SM_Teensy

César Regalado León <ea8cxn@...>
 

Hello, I'm trying to compile the SM_Teensy in a linux based machine.

The install of the Teensy and Arduino is ok, no problem.

I follow the TNC-PI 9k6 manual instructions, but when I compile the code, the follow message appear:

 

In file included from /home/cesar/Arduino/TeensyProjects/libraries/TeensyConfig/../../Soundmodem/afsk/costab.c:1:0,

                 from /tmp/arduino_build_649017/sketch/TeensyWrapper.c:11:

/home/cesar/Arduino/TeensyProjects/libraries/TeensyConfig/../../Soundmodem/afsk/costab.h:30:22: fatal error: ..\modem.h: No such file or directory

 

I supose that some file is not in the correct place but I change the TeensyConfig to many diferent locations and the same results...

 

Thank You!

 


Re: Pi E-mail to Use ARDOP/ARDOP2 CORRECTED

Jerome Kutche
 

Yea it is very aggressive… I will be honest it terrifies me at times.. As I make changes I always keep a backup.. Regardless of your config.. That is always a good idea.. You can quickly get back to were you were… 😊

 

From: RaspberryPi-4-HamRadio@groups.io <RaspberryPi-4-HamRadio@groups.io> On Behalf Of John Wiseman
Sent: Thursday, November 8, 2018 6:50 AM
To: RaspberryPi-4-HamRadio@groups.io
Subject: Re: [RaspberryPi-4-HamRadio] Pi E-mail to Use ARDOP/ARDOP2 CORRECTED

 

Jerry's config file is pretty terrifying, even to me!

I'm in the process of writing instructions and scripts to set up a simple LinBPQ Webmail client system. Hopefully I'll have it finished in the next day or two.

73, John G8BPQ

On 08/11/2018 10:57, Jerome Kutche wrote:

I do not have any notes.. But if you look at the last several ports you will see I have 5 ARDOP Ports…

Two are ARDOP version 1 Ports 2 are ARDOP Version 2 ports the last one if on VHF and experimental.

I am out all day today but by Friday or the weekend I am available by phone….  73 jerry N9LYA

 

https://packet-radio.net/2018/09/complex-bpq32-cfg-from-n9lya/

 

 

 

 

From: RaspberryPi-4-HamRadio@groups.io <RaspberryPi-4-HamRadio@groups.io> On Behalf Of Ed Bloom, KD9FRQ
Sent: Wednesday, November 7, 2018 8:18 PM
To: RaspberryPi-4-HamRadio@groups.io
Subject: Re: [RaspberryPi-4-HamRadio] Pi E-mail to Use ARDOP/ARDOP2 CORRECTED

 

Please share a bpq.cfg file and notes on what to edit so i can get this up and running with ARDOP/ARDOP2 and HF (target is 20m)

 

On 11/7/2018 5:16 AM, Jerome Kutche wrote:

I use PiLinBPQ.. Nice… Not hard to set up with the instructions and some patients.. Well worth it..

 

 

 

From: RaspberryPi-4-HamRadio@groups.io <RaspberryPi-4-HamRadio@groups.io> On Behalf Of Ed Bloom, KD9FRQ
Sent: Tuesday, November 6, 2018 9:04 PM
To: RaspberryPi-4-HamRadio@groups.io
Subject: Re: [RaspberryPi-4-HamRadio] Pi E-mail to Use ARDOP/ARDOP2 CORRECTED

 

So, now that  I have the ARDOP and ARDOP2 compiled (loaded ARDOP2) and loaded on the TNC-Pi9k6..

 

What software is needed to send e-mails with a Radiogram or other form as it sits on the Pi?

 

Are they any pre-configured R Pi IMG files out there that only require a few edits to a config file

to enter my Call Sign, grid, etc... similar to that of the PiGate system?

73s, Ed - KD9FRQ

 

 

 


Re: Pi E-mail to Use ARDOP/ARDOP2 CORRECTED

Ed Bloom, KD9FRQ
 

John, G8BPQ,

Thank you. I look forward to them.

My goal is to be able to setup a "Send" station like the PiGate using ARDOP/ARDOP2 on HF for use in a Disaster as well as the RMS PiGate "Receive" station or be able to connect to any other ARDOP/ARDOP2 RMS station out there.

73s, Ed, KD9FRQ


On 11/8/2018 5:50 AM, John Wiseman wrote:
Jerry's config file is pretty terrifying, even to me!

I'm in the process of writing instructions and scripts to set up a simple LinBPQ Webmail client system. Hopefully I'll have it finished in the next day or two.

73, John G8BPQ

On 08/11/2018 10:57, Jerome Kutche wrote:

I do not have any notes.. But if you look at the last several ports you will see I have 5 ARDOP Ports…

Two are ARDOP version 1 Ports 2 are ARDOP Version 2 ports the last one if on VHF and experimental.

I am out all day today but by Friday or the weekend I am available by phone….  73 jerry N9LYA

 

https://packet-radio.net/2018/09/complex-bpq32-cfg-from-n9lya/

 

 

 

 

From: RaspberryPi-4-HamRadio@groups.io <RaspberryPi-4-HamRadio@groups.io> On Behalf Of Ed Bloom, KD9FRQ
Sent: Wednesday, November 7, 2018 8:18 PM
To: RaspberryPi-4-HamRadio@groups.io
Subject: Re: [RaspberryPi-4-HamRadio] Pi E-mail to Use ARDOP/ARDOP2 CORRECTED

 

Please share a bpq.cfg file and notes on what to edit so i can get this up and running with ARDOP/ARDOP2 and HF (target is 20m)

 

On 11/7/2018 5:16 AM, Jerome Kutche wrote:

I use PiLinBPQ.. Nice… Not hard to set up with the instructions and some patients.. Well worth it..

 

 

 

From: RaspberryPi-4-HamRadio@groups.io <RaspberryPi-4-HamRadio@groups.io> On Behalf Of Ed Bloom, KD9FRQ
Sent: Tuesday, November 6, 2018 9:04 PM
To: RaspberryPi-4-HamRadio@groups.io
Subject: Re: [RaspberryPi-4-HamRadio] Pi E-mail to Use ARDOP/ARDOP2 CORRECTED

 

So, now that  I have the ARDOP and ARDOP2 compiled (loaded ARDOP2) and loaded on the TNC-Pi9k6..

 

What software is needed to send e-mails with a Radiogram or other form as it sits on the Pi?

 

Are they any pre-configured R Pi IMG files out there that only require a few edits to a config file

to enter my Call Sign, grid, etc... similar to that of the PiGate system?

73s, Ed - KD9FRQ

 

 




Re: Pi E-mail to Use ARDOP/ARDOP2 CORRECTED

Ed Bloom, KD9FRQ
 

Jerry,

Thank you for the link. I actually saw that last night and downloaded it so I had CFG to start LinBPQ for the first time.  I got an error stating it was too large.  I must have messed something up when editing what I thought with the GridLoc, etc...

73s, Ed, KD9FRQ


On 11/8/2018 4:57 AM, Jerome Kutche wrote:

I do not have any notes.. But if you look at the last several ports you will see I have 5 ARDOP Ports…

Two are ARDOP version 1 Ports 2 are ARDOP Version 2 ports the last one if on VHF and experimental.

I am out all day today but by Friday or the weekend I am available by phone….  73 jerry N9LYA

 

https://packet-radio.net/2018/09/complex-bpq32-cfg-from-n9lya/

 

 

 

 

From: RaspberryPi-4-HamRadio@groups.io <RaspberryPi-4-HamRadio@groups.io> On Behalf Of Ed Bloom, KD9FRQ
Sent: Wednesday, November 7, 2018 8:18 PM
To: RaspberryPi-4-HamRadio@groups.io
Subject: Re: [RaspberryPi-4-HamRadio] Pi E-mail to Use ARDOP/ARDOP2 CORRECTED

 

Please share a bpq.cfg file and notes on what to edit so i can get this up and running with ARDOP/ARDOP2 and HF (target is 20m)

 

On 11/7/2018 5:16 AM, Jerome Kutche wrote:

I use PiLinBPQ.. Nice… Not hard to set up with the instructions and some patients.. Well worth it..

 

 

 

From: RaspberryPi-4-HamRadio@groups.io <RaspberryPi-4-HamRadio@groups.io> On Behalf Of Ed Bloom, KD9FRQ
Sent: Tuesday, November 6, 2018 9:04 PM
To: RaspberryPi-4-HamRadio@groups.io
Subject: Re: [RaspberryPi-4-HamRadio] Pi E-mail to Use ARDOP/ARDOP2 CORRECTED

 

So, now that  I have the ARDOP and ARDOP2 compiled (loaded ARDOP2) and loaded on the TNC-Pi9k6..

 

What software is needed to send e-mails with a Radiogram or other form as it sits on the Pi?

 

Are they any pre-configured R Pi IMG files out there that only require a few edits to a config file

to enter my Call Sign, grid, etc... similar to that of the PiGate system?

73s, Ed - KD9FRQ

 

 



Re: Pi E-mail to Use ARDOP/ARDOP2 CORRECTED

John G8BPQ
 

Jerry's config file is pretty terrifying, even to me!

I'm in the process of writing instructions and scripts to set up a simple LinBPQ Webmail client system. Hopefully I'll have it finished in the next day or two.

73, John G8BPQ

On 08/11/2018 10:57, Jerome Kutche wrote:

I do not have any notes.. But if you look at the last several ports you will see I have 5 ARDOP Ports…

Two are ARDOP version 1 Ports 2 are ARDOP Version 2 ports the last one if on VHF and experimental.

I am out all day today but by Friday or the weekend I am available by phone….  73 jerry N9LYA

 

https://packet-radio.net/2018/09/complex-bpq32-cfg-from-n9lya/

 

 

 

 

From: RaspberryPi-4-HamRadio@groups.io <RaspberryPi-4-HamRadio@groups.io> On Behalf Of Ed Bloom, KD9FRQ
Sent: Wednesday, November 7, 2018 8:18 PM
To: RaspberryPi-4-HamRadio@groups.io
Subject: Re: [RaspberryPi-4-HamRadio] Pi E-mail to Use ARDOP/ARDOP2 CORRECTED

 

Please share a bpq.cfg file and notes on what to edit so i can get this up and running with ARDOP/ARDOP2 and HF (target is 20m)

 

On 11/7/2018 5:16 AM, Jerome Kutche wrote:

I use PiLinBPQ.. Nice… Not hard to set up with the instructions and some patients.. Well worth it..

 

 

 

From: RaspberryPi-4-HamRadio@groups.io <RaspberryPi-4-HamRadio@groups.io> On Behalf Of Ed Bloom, KD9FRQ
Sent: Tuesday, November 6, 2018 9:04 PM
To: RaspberryPi-4-HamRadio@groups.io
Subject: Re: [RaspberryPi-4-HamRadio] Pi E-mail to Use ARDOP/ARDOP2 CORRECTED

 

So, now that  I have the ARDOP and ARDOP2 compiled (loaded ARDOP2) and loaded on the TNC-Pi9k6..

 

What software is needed to send e-mails with a Radiogram or other form as it sits on the Pi?

 

Are they any pre-configured R Pi IMG files out there that only require a few edits to a config file

to enter my Call Sign, grid, etc... similar to that of the PiGate system?

73s, Ed - KD9FRQ

 

 



Re: Pi E-mail to Use ARDOP/ARDOP2 CORRECTED

Jerome Kutche
 

I do not have any notes.. But if you look at the last several ports you will see I have 5 ARDOP Ports…

Two are ARDOP version 1 Ports 2 are ARDOP Version 2 ports the last one if on VHF and experimental.

I am out all day today but by Friday or the weekend I am available by phone….  73 jerry N9LYA

 

https://packet-radio.net/2018/09/complex-bpq32-cfg-from-n9lya/

 

 

 

 

From: RaspberryPi-4-HamRadio@groups.io <RaspberryPi-4-HamRadio@groups.io> On Behalf Of Ed Bloom, KD9FRQ
Sent: Wednesday, November 7, 2018 8:18 PM
To: RaspberryPi-4-HamRadio@groups.io
Subject: Re: [RaspberryPi-4-HamRadio] Pi E-mail to Use ARDOP/ARDOP2 CORRECTED

 

Please share a bpq.cfg file and notes on what to edit so i can get this up and running with ARDOP/ARDOP2 and HF (target is 20m)

 

On 11/7/2018 5:16 AM, Jerome Kutche wrote:

I use PiLinBPQ.. Nice… Not hard to set up with the instructions and some patients.. Well worth it..

 

 

 

From: RaspberryPi-4-HamRadio@groups.io <RaspberryPi-4-HamRadio@groups.io> On Behalf Of Ed Bloom, KD9FRQ
Sent: Tuesday, November 6, 2018 9:04 PM
To: RaspberryPi-4-HamRadio@groups.io
Subject: Re: [RaspberryPi-4-HamRadio] Pi E-mail to Use ARDOP/ARDOP2 CORRECTED

 

So, now that  I have the ARDOP and ARDOP2 compiled (loaded ARDOP2) and loaded on the TNC-Pi9k6..

 

What software is needed to send e-mails with a Radiogram or other form as it sits on the Pi?

 

Are they any pre-configured R Pi IMG files out there that only require a few edits to a config file

to enter my Call Sign, grid, etc... similar to that of the PiGate system?

73s, Ed - KD9FRQ

 

 


Re: Pi E-mail to Use ARDOP/ARDOP2 CORRECTED

Ed Bloom, KD9FRQ
 

Please share a bpq.cfg file and notes on what to edit so i can get this up and running with ARDOP/ARDOP2 and HF (target is 20m)


On 11/7/2018 5:16 AM, Jerome Kutche wrote:

I use PiLinBPQ.. Nice… Not hard to set up with the instructions and some patients.. Well worth it..

 

 

 

From: RaspberryPi-4-HamRadio@groups.io <RaspberryPi-4-HamRadio@groups.io> On Behalf Of Ed Bloom, KD9FRQ
Sent: Tuesday, November 6, 2018 9:04 PM
To: RaspberryPi-4-HamRadio@groups.io
Subject: Re: [RaspberryPi-4-HamRadio] Pi E-mail to Use ARDOP/ARDOP2 CORRECTED

 

So, now that  I have the ARDOP and ARDOP2 compiled (loaded ARDOP2) and loaded on the TNC-Pi9k6..

 

What software is needed to send e-mails with a Radiogram or other form as it sits on the Pi?

 

Are they any pre-configured R Pi IMG files out there that only require a few edits to a config file

to enter my Call Sign, grid, etc... similar to that of the PiGate system?

73s, Ed - KD9FRQ

 



Re: Pi E-mail to Use ARDOP/ARDOP2 CORRECTED

Jerome Kutche
 

I use PiLinBPQ.. Nice… Not hard to set up with the instructions and some patients.. Well worth it..

 

 

 

From: RaspberryPi-4-HamRadio@groups.io <RaspberryPi-4-HamRadio@groups.io> On Behalf Of Ed Bloom, KD9FRQ
Sent: Tuesday, November 6, 2018 9:04 PM
To: RaspberryPi-4-HamRadio@groups.io
Subject: Re: [RaspberryPi-4-HamRadio] Pi E-mail to Use ARDOP/ARDOP2 CORRECTED

 

So, now that  I have the ARDOP and ARDOP2 compiled (loaded ARDOP2) and loaded on the TNC-Pi9k6..

 

What software is needed to send e-mails with a Radiogram or other form as it sits on the Pi?

 

Are they any pre-configured R Pi IMG files out there that only require a few edits to a config file

to enter my Call Sign, grid, etc... similar to that of the PiGate system?

73s, Ed - KD9FRQ

 


Re: Pi E-mail to Use ARDOP/ARDOP2 CORRECTED

Jens oh6eln
 

I have been using my teensy ardop tnc with linbpq software for sending emails.
Linbpq is not the easiest to set up imho.
Arim and PAT are only compatible with the software ardop/ardop2 TNCs AFAIK.
Some progress to make arim compatible with the teensy might be ongoing. :)


Re: Pi E-mail to Use ARDOP/ARDOP2 CORRECTED

Ed Bloom, KD9FRQ
 

So, now that  I have the ARDOP and ARDOP2 compiled (loaded ARDOP2) and loaded on the TNC-Pi9k6..
 
What software is needed to send e-mails with a Radiogram or other form as it sits on the Pi?
 
Are they any pre-configured R Pi IMG files out there that only require a few edits to a config file
to enter my Call Sign, grid, etc... similar to that of the PiGate system?

73s, Ed - KD9FRQ
 


Pi E-mail to Use ARDOP/ARDOP2

Ed Bloom, KD9FRQ
 

So, once I get the ARDOP or ARDOP2 to compile and then loaded on the TNC-Pi9k6..
 
What software is needed to site and send e-mails with a Radiogram or other form?
 
Are they any preconfigured IMG files out there that only require a few edits to a config file
to enter my Call Sign, grid, etc... similar to that of the PiGate system?
 
Ed Bloom
ewbloom@...
Sent from Webmail access


Re: Compiling SM_Teensy with Arduino 1.8.7 and Teensyduino 1.44

John G8BPQ
 

My apologies - I thought I'd uploaded the fix for that. I've just tested that ARDOP, ARDOP2 and SM_Teensy projects build here with the latest Arduino and TeensyDuino IDE versions and uploaded to

http://www.cantab.net/users/john.wiseman/Downloads/Beta/TeensyProjects.zip

ARDOP is configured to use the serial port on the Pi header for host communication (at 115200) and the USB Serial port for Monitoring. If this doesn't suite your needs edit TeensyConfigARDOP.h

73,
John

On 06/11/2018 15:37, Bob NW8L wrote:
Hello,

Be advised that the ARDOP2 project in the latest TeensyProject.zip file (dated 2018-10-15) won't compile until you add extern "C" wrappers around these functions in ARDOP2_Teensy.ino:

_gettimeofday()
pktProcessNewSamples(short * buf, int count)

e.g. the latter could be:

extern "C" {
    void pktProcessNewSamples(short * buf, int count)
    {}
}

or they can be moved into an existing wrapper, like the one starting on line 274.

73,
Bob NW8L


Re: Compiling SM_Teensy with Arduino 1.8.7 and Teensyduino 1.44

Bob NW8L
 

Hello,

Be advised that the ARDOP2 project in the latest TeensyProject.zip file (dated 2018-10-15) won't compile until you add extern "C" wrappers around these functions in ARDOP2_Teensy.ino:

_gettimeofday()
pktProcessNewSamples(short * buf, int count)

e.g. the latter could be:

extern "C" {
    void pktProcessNewSamples(short * buf, int count)
    {}
}

or they can be moved into an existing wrapper, like the one starting on line 274.

73,
Bob NW8L


Re: Compiling SM_Teensy with Arduino 1.8.7 and Teensyduino 1.44

John G8BPQ
 

The latest IDE isn't compatible with the version on the TNC-Pi site. Try this one(or

http://www.cantab.net/users/john.wiseman/Downloads/Beta/TeensyProjects.zip

73, John G8BPQ

On 06/11/2018 03:08, Ed Bloom, KD9FRQ wrote:
OK. boards.txt and platform.txt are copied as noted in Readme

Arduino set to Teensy 3.6 via Tools>Board and comm port set to proper port, TNC lights up when plugged in

File>Preferences path set per notes

Still nothing compiles from TeensyProjects. No longer getting ADROP not defined error. But the projects just don't compile

All and I mean all sample projects that come with Arduino 1.8.7 download DO compile and give option to load (I do not load them).

TeensyProject.zip was downloaded from link in TNC-P9K6 manual.

What else should I try?

73s, Ed - KD9FRQ


On 11/5/2018 7:38 AM, John Wiseman wrote:
Ok, Ed.

The idea of the mod to platform.txt is that the required #define will be set from the project name. If it doesn't work you can add #define ARDOP to TeensyConfig.h but then you'll have to change it if you want to build the packet software.

73, John

On 05/11/2018 12:16, Ed Bloom, KD9FRQ wrote:
I copied them as noted.  I will do it again just to make sure.


On 11/5/2018 1:22 AM, John Wiseman wrote:
Most likely you haven't updated boards.txt and platform.txt. See the README.txt in the TeensyProjects folder.

73, John



On 05/11/2018 01:23, Ed Bloom, KD9FRQ wrote:
hmm......The path is set to ../Document/Arduino/TeensyProjects but I still get the error trying to compile any of the dot INO files in the TeensyProjects folder.

The error locks on line "  #error("ARDOP not defined in TeensyConfig.h");

I have tried putting TeensyConfig.h in every folder with no success.

What else should I try?

73s, Ed

On 11/4/2018 4:27 PM, John Wiseman wrote:
Ed,

TeensyProjects doesn't have to be in the Arduino folder, but you have to set the Arduino Sketchbook Location to the path of the TeensyProjects folder

73, John

On 04/11/2018 21:44, Ed Bloom, KD9FRQ wrote:
One and All,

I have my TNC-Pi9K6 ready and working.  I downloaded Arduino 1.8.7 and Teensyduino 1.44.  Both seemed to have installed correctly.

I unzipped the TeensyProjects.zip and it is now in the Arduino folder next to Libraries in the proper directory per the install of Arduino 1.8.7.

When I load any of the Teensy Projects and compile, I get an error that states TeensyCommon.h : No such file or directory.

What setting do I need change in Arduino to use the recursive library search or do I need to move some files to another location?

73s,  Ed - KD9FRQ


On 10/18/2018 2:41 AM, John Wiseman wrote:
Yes, it should say host connection on serial1. Looks like the HOSTPORT
definition is missing or is being ignored for some reason.

It looks like you also have #define CPULOAD active - that won't do much harm
but will generate a lot of extra logging (the LOAD = Lines).

73,
John
________________________________________
From: RaspberryPi-4-HamRadio@groups.io
[mailto:RaspberryPi-4-HamRadio@groups.io] On Behalf Of Bob NW8L
Sent: 18 October 2018 08:01
To: RaspberryPi-4-HamRadio@groups.io
Subject: Re: [RaspberryPi-4-HamRadio] Compiling SM_Teensy with Arduino 1.8.7
and Teensyduino 1.44

John,

Yes, the 4 LEDS on the TNC flash in sequence when the TNC powers up.

I'm getting output on the Serial Monitor:

Monitor Buffer Space 64 Host Connection is i2c on address 1f Hex Adjusting
RX Level 1500 mV Pot 128 Adjusting TX Level 300 mV Pot 25 ARDOPC Version
2.0.3.7-BPQ CPU 180000000 Bus 60000000 FreeRAM 92595 DAC Baseline 32798
Sample Rate 12000 PDB Divider 5000 VREF 32987 offset 219 Adjusting TX Level
300 mV Pot 25 Hardware Serial No 04:E9:E5:07:0E:98 OLED not found at address
0x3C Load = 100 Load = 34 Load = 36 Load = 36 Load = 36 Load = 36 Load = 36
Load = 36 Input peaks 0 -296 average -264 Command to Host INPUTPEAKS -296 0
Level below threshold - assume no input 0 -296 14 pk Load = 36 Load = 36
Load = 36 Load = 36 <...>

It states that the Host Connection is i2c on address 1f Hex, which doesn't
look right, it should be a serial port, SERIAL1?

I didn't have time to follow up on this today, will try to learn more
tomorrow.

73,
Bob NW8L


























Re: Compiling SM_Teensy with Arduino 1.8.7 and Teensyduino 1.44

Ed Bloom, KD9FRQ
 

OK.  boards.txt and platform.txt are copied as noted in Readme

Arduino set to Teensy 3.6 via Tools>Board and comm port set to proper port, TNC lights up when plugged in

File>Preferences path set per notes

Still nothing compiles from TeensyProjects. No longer getting ADROP not defined error. But the projects just don't compile

All and I mean all sample projects that come with Arduino 1.8.7 download DO compile and give option to load (I do not load them).

TeensyProject.zip was downloaded from link in TNC-P9K6 manual.

What else should I try?

73s, Ed - KD9FRQ

On 11/5/2018 7:38 AM, John Wiseman wrote:
Ok, Ed.

The idea of the mod to platform.txt is that the required #define will be set from the project name. If it doesn't work you can add #define ARDOP to TeensyConfig.h but then you'll have to change it if you want to build the packet software.

73, John

On 05/11/2018 12:16, Ed Bloom, KD9FRQ wrote:
I copied them as noted.  I will do it again just to make sure.


On 11/5/2018 1:22 AM, John Wiseman wrote:
Most likely you haven't updated boards.txt and platform.txt. See the README.txt in the TeensyProjects folder.

73, John



On 05/11/2018 01:23, Ed Bloom, KD9FRQ wrote:
hmm......The path is set to ../Document/Arduino/TeensyProjects but I still get the error trying to compile any of the dot INO files in the TeensyProjects folder.

The error locks on line "  #error("ARDOP not defined in TeensyConfig.h");

I have tried putting TeensyConfig.h in every folder with no success.

What else should I try?

73s, Ed

On 11/4/2018 4:27 PM, John Wiseman wrote:
Ed,

TeensyProjects doesn't have to be in the Arduino folder, but you have to set the Arduino Sketchbook Location to the path of the TeensyProjects folder

73, John

On 04/11/2018 21:44, Ed Bloom, KD9FRQ wrote:
One and All,

I have my TNC-Pi9K6 ready and working.  I downloaded Arduino 1.8.7 and Teensyduino 1.44.  Both seemed to have installed correctly.

I unzipped the TeensyProjects.zip and it is now in the Arduino folder next to Libraries in the proper directory per the install of Arduino 1.8.7.

When I load any of the Teensy Projects and compile, I get an error that states TeensyCommon.h : No such file or directory.

What setting do I need change in Arduino to use the recursive library search or do I need to move some files to another location?

73s,  Ed - KD9FRQ


On 10/18/2018 2:41 AM, John Wiseman wrote:
Yes, it should say host connection on serial1. Looks like the HOSTPORT
definition is missing or is being ignored for some reason.

It looks like you also have #define CPULOAD active - that won't do much harm
but will generate a lot of extra logging (the LOAD = Lines).

73,
John
________________________________________
From: RaspberryPi-4-HamRadio@groups.io
[mailto:RaspberryPi-4-HamRadio@groups.io] On Behalf Of Bob NW8L
Sent: 18 October 2018 08:01
To: RaspberryPi-4-HamRadio@groups.io
Subject: Re: [RaspberryPi-4-HamRadio] Compiling SM_Teensy with Arduino 1.8.7
and Teensyduino 1.44

John,

Yes, the 4 LEDS on the TNC flash in sequence when the TNC powers up.

I'm getting output on the Serial Monitor:

Monitor Buffer Space 64 Host Connection is i2c on address 1f Hex Adjusting
RX Level 1500 mV Pot 128 Adjusting TX Level 300 mV Pot 25 ARDOPC Version
2.0.3.7-BPQ CPU 180000000 Bus 60000000 FreeRAM 92595 DAC Baseline 32798
Sample Rate 12000 PDB Divider 5000 VREF 32987 offset 219 Adjusting TX Level
300 mV Pot 25 Hardware Serial No 04:E9:E5:07:0E:98 OLED not found at address
0x3C Load = 100 Load = 34 Load = 36 Load = 36 Load = 36 Load = 36 Load = 36
Load = 36 Input peaks 0 -296 average -264 Command to Host INPUTPEAKS -296 0
Level below threshold - assume no input 0 -296 14 pk Load = 36 Load = 36
Load = 36 Load = 36 <...>

It states that the Host Connection is i2c on address 1f Hex, which doesn't
look right, it should be a serial port, SERIAL1?

I didn't have time to follow up on this today, will try to learn more
tomorrow.

73,
Bob NW8L























Re: new to the group and to rpi

Niece KA1ULN
 

Aaron   flrig  works  great  i use it....
i use  fldigi and  wsjt-x on my  TS120s  and      rpi3

good luck

i wanna  get     gprx  working  for a  panadapter!


Re: 857D Rig control and panadapter

Niece KA1ULN
 

hi Mike  did you ever  get this going  with  a  KX3 and  raspberry pi?
what  code  did you use?

ka1uln@...


Re: Panadapter & PI 2

Niece KA1ULN
 

Robert  did you ever  figure  out how  to  get the   PANADAPTER  working  for the   KX3  with a  raspberry pi?

i am  about  3/4  of the  way there. and  having  such a  difficult time....

is  it  working  for you?

which  code  did you use?
callsign  ka1uln@...


Re: Raspi and sound card setup

Bob Bennett
 

I use my pi with a kx2 and a FT817. Your radio needs to use one USB connection for the rig control and another connection that does audio in and audio separately. I just use one of those cheap usb dongles from my Pi to the audio and mic jacks. 


Re: Compiling SM_Teensy with Arduino 1.8.7 and Teensyduino 1.44

John G8BPQ
 

Ok, Ed.

The idea of the mod to platform.txt is that the required #define will be set from the project name. If it doesn't work you can add #define ARDOP to TeensyConfig.h but then you'll have to change it if you want to build the packet software.

73, John

On 05/11/2018 12:16, Ed Bloom, KD9FRQ wrote:
I copied them as noted.  I will do it again just to make sure.


On 11/5/2018 1:22 AM, John Wiseman wrote:
Most likely you haven't updated boards.txt and platform.txt. See the README.txt in the TeensyProjects folder.

73, John



On 05/11/2018 01:23, Ed Bloom, KD9FRQ wrote:
hmm......The path is set to ../Document/Arduino/TeensyProjects but I still get the error trying to compile any of the dot INO files in the TeensyProjects folder.

The error locks on line "  #error("ARDOP not defined in TeensyConfig.h");

I have tried putting TeensyConfig.h in every folder with no success.

What else should I try?

73s, Ed

On 11/4/2018 4:27 PM, John Wiseman wrote:
Ed,

TeensyProjects doesn't have to be in the Arduino folder, but you have to set the Arduino Sketchbook Location to the path of the TeensyProjects folder

73, John

On 04/11/2018 21:44, Ed Bloom, KD9FRQ wrote:
One and All,

I have my TNC-Pi9K6 ready and working.  I downloaded Arduino 1.8.7 and Teensyduino 1.44.  Both seemed to have installed correctly.

I unzipped the TeensyProjects.zip and it is now in the Arduino folder next to Libraries in the proper directory per the install of Arduino 1.8.7.

When I load any of the Teensy Projects and compile, I get an error that states TeensyCommon.h : No such file or directory.

What setting do I need change in Arduino to use the recursive library search or do I need to move some files to another location?

73s,  Ed - KD9FRQ


On 10/18/2018 2:41 AM, John Wiseman wrote:
Yes, it should say host connection on serial1. Looks like the HOSTPORT
definition is missing or is being ignored for some reason.

It looks like you also have #define CPULOAD active - that won't do much harm
but will generate a lot of extra logging (the LOAD = Lines).

73,
John
________________________________________
From: RaspberryPi-4-HamRadio@groups.io
[mailto:RaspberryPi-4-HamRadio@groups.io] On Behalf Of Bob NW8L
Sent: 18 October 2018 08:01
To: RaspberryPi-4-HamRadio@groups.io
Subject: Re: [RaspberryPi-4-HamRadio] Compiling SM_Teensy with Arduino 1.8.7
and Teensyduino 1.44

John,

Yes, the 4 LEDS on the TNC flash in sequence when the TNC powers up.

I'm getting output on the Serial Monitor:

Monitor Buffer Space 64 Host Connection is i2c on address 1f Hex Adjusting
RX Level 1500 mV Pot 128 Adjusting TX Level 300 mV Pot 25 ARDOPC Version
2.0.3.7-BPQ CPU 180000000 Bus 60000000 FreeRAM 92595 DAC Baseline 32798
Sample Rate 12000 PDB Divider 5000 VREF 32987 offset 219 Adjusting TX Level
300 mV Pot 25 Hardware Serial No 04:E9:E5:07:0E:98 OLED not found at address
0x3C Load = 100 Load = 34 Load = 36 Load = 36 Load = 36 Load = 36 Load = 36
Load = 36 Input peaks 0 -296 average -264 Command to Host INPUTPEAKS -296 0
Level below threshold - assume no input 0 -296 14 pk Load = 36 Load = 36
Load = 36 Load = 36 <...>

It states that the Host Connection is i2c on address 1f Hex, which doesn't
look right, it should be a serial port, SERIAL1?

I didn't have time to follow up on this today, will try to learn more
tomorrow.

73,
Bob NW8L



















4901 - 4920 of 13263