Date   

Re: Pi 3 Wifi and Bluetooth

John G8BPQ
 

Just got my PI3


The wifi appears as wlan0. I added the following to /etc/network/interfaces
and it connected


iface wlan0 inet static
address 192.168.1.21
netmask 255.255.255.0
gateway 192.168.1.254
wpa-ssid "Hilton"
wpa-psk "xxxxxxxxxxx"


You can probably set it up via a gui if you prefer.


I haven’t investigated Bluetooth yet, but my recollection from playing with
it before is that it is a bit more complicated


73,
John








________________________________________
From: Raspberry_Pi_4-Ham_RADIO@yahoogroups.com
[mailto:Raspberry_Pi_4-Ham_RADIO@yahoogroups.com]
Sent: 03 March 2016 12:47
To: Raspberry_Pi_4-Ham_RADIO@yahoogroups.com
Subject: [Raspberry_Pi_4-Ham_RADIO] Pi 3


 
Maybe I need to wait for a kernel update??


But does anyone know how to find the Bluetooth and wifi on board the Pi 3.
And how to configure them???


73 jerry n9lya


Re: File transfer over APRS?

Marty Hartwell
 

Hi

Newbe here so beware of possible misinformation, but it is my understanding that Fldigi suite can be
compiled on the RPi 2B and with it messages can be transmitted to get this information out.

I just got my Pi for Christmas last and I haven't done much with it but plan on doing just this, get the
needed requirements loaded to compile and use fldigi-suite. Maybe later adding another one for packet.


Marty kd8bj

On 03/03/2016 12:17 PM, 'n5xmt1@yahoo.com' n5xmt1@yahoo.com [Raspberry_Pi_4-Ham_RADIO] wrote:

APRS limits the total number of characters that can be sent in a message. It breaks up larger messages into smaller ones like the old original cellphone texting did at 140 characters

Sent by MailWise <http://www.mail-wise.com/installation/2> – See your emails as clean, short chats.



-------- Original Message --------
From: "Erik Brom ewbrom@hbci.com [Raspberry_Pi_4-Ham_RADIO]" <Raspberry_Pi_4-Ham_RADIO@yahoogroups.com>
Sent: Thursday, March 3, 2016 08:14 AM
To: Raspberry_Pi_4-Ham_RADIO@yahoogroups.com
Subject: [Raspberry_Pi_4-Ham_RADIO] File transfer over APRS?

Anybody know if it's possible to transfer text files, say a list of supplies needed, or people at a shelter, using APRS messaging?

Erik, WB0NIU

--
Sent from my Android device with K-9 Mail. Please excuse my brevity.


Re: Raspberry Pi 3 Old Image

sspence@...
 

For backwards compatibility, the Pi3 acts like a really fast 32bit system. As no 64bit pi specific apps are available, a 64bit OS was not considered a high priority, and could cause confusion with the 32bit Pi's already on the market. 


Re: Raspberry Pi 3 Old Image

Jerome Kutche
 

Yea I use all my Pis but one headless.. I will look into the smaller builds.. Thanks 73 Jerry n9lya


Re: Raspberry Pi 3 Old Image

John G8BPQ
 

My new install of Raspbian Jessie Lite is Linux version 4.1.18-v7+. I
understand from the Pi forum that they haven't yet produced an arm8 specific
Kernel yet.

As an aside, I haven’t seen many comments on the lite images here. These are
cut down images without an X server or a mass of desktop apps. If you always
use your pi headless it may be worth considering. It is a much smaller
download, and will fit on a 2 GB card. It also boots in about 15 seconds.

73,
John


________________________________________
From: Raspberry_Pi_4-Ham_RADIO@yahoogroups.com
[mailto:Raspberry_Pi_4-Ham_RADIO@yahoogroups.com]
Sent: 04 March 2016 09:38
To: Raspberry_Pi_4-Ham_RADIO@yahoogroups.com
Subject: RE: [Raspberry_Pi_4-Ham_RADIO] Re: Raspberry Pi 3 Old Image

 
John what version is it at 4….18+ or ?? Higher??? Just curious  mine is at
18+ and still reports that it’s armv7l instead of 8l.??
 
73 jerry
 
From: Raspberry_Pi_4-Ham_RADIO@yahoogroups.com
[mailto:Raspberry_Pi_4-Ham_RADIO@yahoogroups.com]
Sent: Friday, March 4, 2016 4:00 AM
To: Raspberry_Pi_4-Ham_RADIO@yahoogroups.com
Subject: RE: [Raspberry_Pi_4-Ham_RADIO] Re: Raspberry Pi 3 Old Image
 
 
Stephen,

On my wheezy system, apt-get update/upgrade didn’t update the kernel. I had
to run rpi-update as well to do that. I now have the latest kernel, so would
expect it to work, but as my PI3 is two days late I can't be sure. But it is
definitely worth trying rpi-update.

73,
John G8BPQ

________________________________________
From: Raspberry_Pi_4-Ham_RADIO@yahoogroups.com
[mailto:Raspberry_Pi_4-Ham_RADIO@yahoogroups.com]
Sent: 03 March 2016 23:38
To: Raspberry_Pi_4-Ham_RADIO@yahoogroups.com
Subject: [Raspberry_Pi_4-Ham_RADIO] Re: Raspberry Pi 3 Old Image

 
I hit problems when trying to use images from Pi2 systems on my new Pi 3.
Had done apt-get update and apt-get upgrade on Pi 2 image before use on Pi
3. They were wheezy images - did not try a Jessie one.

Downloading new Jessie image  worked OK.

Need to see whether I can get a wheezy image to work i.e. do a rpi-update
before trying to run on Pi 3.
Also whether a Jessie image from a Pi 2 is OK.

Regards
Stephen


Re: Raspberry Pi 3 Old Image

Jerome Kutche
 

You can move your SC card to the Pi3 without issue… of if its 32bit card or 64bit

 

 

From: Raspberry_Pi_4-Ham_RADIO@... [mailto:Raspberry_Pi_4-Ham_RADIO@...]
Sent: Thursday, March 3, 2016 11:12 PM
To: Raspberry_Pi_4-Ham_RADIO@...
Subject: Re: [Raspberry_Pi_4-Ham_RADIO] Raspberry Pi 3 Old Image

 

 

Of course, your pi2 image is a 32 bit system with 32 bit apps and the pi3 is a 64 bit system. At least I HOPE the pi3 image is 64 bit.

 

On Tue, Mar 1, 2016 at 1:01 PM, philip.r.green@... [Raspberry_Pi_4-Ham_RADIO] <Raspberry_Pi_4-Ham_RADIO@...> wrote:

 

I was hoping that I could just update my raspberry Pi on my Pi 2 and then put the SD card in the Pi 3. But I can't get it to boot.
Installed a new image from the Pi web site and that works. Now I have to install my applications again?
Any advice?
Regards
Phil



 

--

 

Patricia Wilson
Apache Junction, AZ
Member NRA, ARRL
WB8DXX (Extra)

 


Re: Raspberry Pi 3 Old Image

Jerome Kutche
 

John what version is it at 4….18+ or ?? Higher??? Just curious  mine is at 18+ and still reports that it’s armv7l instead of 8l.??

 

73 jerry

 

From: Raspberry_Pi_4-Ham_RADIO@... [mailto:Raspberry_Pi_4-Ham_RADIO@...]
Sent: Friday, March 4, 2016 4:00 AM
To: Raspberry_Pi_4-Ham_RADIO@...
Subject: RE: [Raspberry_Pi_4-Ham_RADIO] Re: Raspberry Pi 3 Old Image

 

 

Stephen,

On my wheezy system, apt-get update/upgrade didn’t update the kernel. I had
to run rpi-update as well to do that. I now have the latest kernel, so would
expect it to work, but as my PI3 is two days late I can't be sure. But it is
definitely worth trying rpi-update.

73,
John G8BPQ

________________________________________
From: Raspberry_Pi_4-Ham_RADIO@...
[mailto:Raspberry_Pi_4-Ham_RADIO@...]
Sent: 03 March 2016 23:38
To: Raspberry_Pi_4-Ham_RADIO@...
Subject: [Raspberry_Pi_4-Ham_RADIO] Re: Raspberry Pi 3 Old Image

 
I hit problems when trying to use images from Pi2 systems on my new Pi 3.
Had done apt-get update and apt-get upgrade on Pi 2 image before use on Pi
3. They were wheezy images - did not try a Jessie one.

Downloading new Jessie image  worked OK.

Need to see whether I can get a wheezy image to work i.e. do a rpi-update
before trying to run on Pi 3.
Also whether a Jessie image from a Pi 2 is OK.

Regards
Stephen


Re: Raspberry Pi 3 Old Image

John G8BPQ
 

No, there isn’t a 64 bit version of Rasbian yet. The new system is still 32
bit. But why would you want the overhead of a 64 bit system when you only
have 1 GB RAM?


73,
John




________________________________________
From: Raspberry_Pi_4-Ham_RADIO@yahoogroups.com
[mailto:Raspberry_Pi_4-Ham_RADIO@yahoogroups.com]
Sent: 04 March 2016 04:12
To: Raspberry_Pi_4-Ham_RADIO@yahoogroups.com
Subject: Re: [Raspberry_Pi_4-Ham_RADIO] Raspberry Pi 3 Old Image


 
Of course, your pi2 image is a 32 bit system with 32 bit apps and the pi3 is
a 64 bit system. At least I HOPE the pi3 image is 64 bit.

On Tue, Mar 1, 2016 at 1:01 PM, philip.r.green@btinternet.com
[Raspberry_Pi_4-Ham_RADIO] <Raspberry_Pi_4-Ham_RADIO@yahoogroups.com> wrote:
 
I was hoping that I could just update my raspberry Pi on my Pi 2 and then
put the SD card in the Pi 3. But I can't get it to boot.
Installed a new image from the Pi web site and that works. Now I have to
install my applications again?
Any advice?
Regards
Phil








--


Patricia Wilson
Apache Junction, AZ
Member NRA, ARRL
WB8DXX (Extra)


Re: Raspberry Pi 3 Old Image

John G8BPQ
 

Stephen,


On my wheezy system, apt-get update/upgrade didn’t update the kernel. I had
to run rpi-update as well to do that. I now have the latest kernel, so would
expect it to work, but as my PI3 is two days late I can't be sure. But it is
definitely worth trying rpi-update.


73,
John G8BPQ


________________________________________
From: Raspberry_Pi_4-Ham_RADIO@yahoogroups.com
[mailto:Raspberry_Pi_4-Ham_RADIO@yahoogroups.com]
Sent: 03 March 2016 23:38
To: Raspberry_Pi_4-Ham_RADIO@yahoogroups.com
Subject: [Raspberry_Pi_4-Ham_RADIO] Re: Raspberry Pi 3 Old Image


 
I hit problems when trying to use images from Pi2 systems on my new Pi 3.
Had done apt-get update and apt-get upgrade on Pi 2 image before use on Pi
3. They were wheezy images - did not try a Jessie one.


Downloading new Jessie image  worked OK.


Need to see whether I can get a wheezy image to work i.e. do a rpi-update
before trying to run on Pi 3.
Also whether a Jessie image from a Pi 2 is OK.


Regards
Stephen


Re: Raspberry Pi 3 Old Image

David Cooley
 

Pi3 image isn't 64 bit yet.  Raspberrypi.org says they are working on the 64 bit distribution.  However, just like any other OS, unless you have an app specifically written to run 64 bit, it won't run any differently on 32 or 64

Sent by MailWise – See your emails as clean, short chats.



-------- Original Message --------
From: "Patricia Wilson wilson.pr.gm@... [Raspberry_Pi_4-Ham_RADIO]" <Raspberry_Pi_4-Ham_RADIO@...>
Sent: Thursday, March 3, 2016 08:11 PM
To: Raspberry_Pi_4-Ham_RADIO@...
Subject: Re: [Raspberry_Pi_4-Ham_RADIO] Raspberry Pi 3 Old Image

 

Of course, your pi2 image is a 32 bit system with 32 bit apps and the pi3 is a 64 bit system. At least I HOPE the pi3 image is 64 bit.

On Tue, Mar 1, 2016 at 1:01 PM, philip.r.green@... [Raspberry_Pi_4-Ham_RADIO] <Raspberry_Pi_4-Ham_RADIO@...> wrote:
 

I was hoping that I could just update my raspberry Pi on my Pi 2 and then put the SD card in the Pi 3. But I can't get it to boot.
Installed a new image from the Pi web site and that works. Now I have to install my applications again?
Any advice?
Regards
Phil




--

Patricia Wilson
Apache Junction, AZ
Member NRA, ARRL
WB8DXX (Extra)


Re: Raspberry Pi 3 Old Image

Patricia Wilson <wilson.pr.gm@...>
 

Of course, your pi2 image is a 32 bit system with 32 bit apps and the pi3 is a 64 bit system. At least I HOPE the pi3 image is 64 bit.

On Tue, Mar 1, 2016 at 1:01 PM, philip.r.green@... [Raspberry_Pi_4-Ham_RADIO] <Raspberry_Pi_4-Ham_RADIO@...> wrote:
 

I was hoping that I could just update my raspberry Pi on my Pi 2 and then put the SD card in the Pi 3. But I can't get it to boot.
Installed a new image from the Pi web site and that works. Now I have to install my applications again?
Any advice?
Regards
Phil




--

Patricia Wilson
Apache Junction, AZ
Member NRA, ARRL
WB8DXX (Extra)


Re: Raspberry Pi 3 Old Image

John Lawrence
 

Stephen
Check the forums on www.raspberry.org
Lots of good help from there.

NE3E

On Thu, Mar 3, 2016 at 6:37 PM, stephen.darlington1@... [Raspberry_Pi_4-Ham_RADIO] <Raspberry_Pi_4-Ham_RADIO@...> wrote:
 

I hit problems when trying to use images from Pi2 systems on my new Pi 3. Had done apt-get update and apt-get upgrade on Pi 2 image before use on Pi 3. They were wheezy images - did not try a Jessie one.


Downloading new Jessie image  worked OK.

Need to see whether I can get a wheezy image to work i.e. do a rpi-update before trying to run on Pi 3.
Also whether a Jessie image from a Pi 2 is OK.

Regards
Stephen




--
John


Re: Raspberry Pi 3 Old Image

STEPHEN DARLINGTON
 

I hit problems when trying to use images from Pi2 systems on my new Pi 3. Had done apt-get update and apt-get upgrade on Pi 2 image before use on Pi 3. They were wheezy images - did not try a Jessie one.

Downloading new Jessie image  worked OK.

Need to see whether I can get a wheezy image to work i.e. do a rpi-update before trying to run on Pi 3.
Also whether a Jessie image from a Pi 2 is OK.

Regards
Stephen


Re: ForSale: Flex 6500/Flex 6300/ Elecraft K3/P3 & Elecraft KX3.//

Jerome Kutche
 

Thanks for the heads up Jon...

Jerry


Re: File transfer over APRS?

David Cooley
 

APRS limits the total number of characters that can be sent in a message.  It breaks up larger messages into smaller ones like the old original cellphone texting did at 140 characters

Sent by MailWise – See your emails as clean, short chats.



-------- Original Message --------
From: "Erik Brom ewbrom@... [Raspberry_Pi_4-Ham_RADIO]" <Raspberry_Pi_4-Ham_RADIO@...>
Sent: Thursday, March 3, 2016 08:14 AM
To: Raspberry_Pi_4-Ham_RADIO@...
Subject: [Raspberry_Pi_4-Ham_RADIO] File transfer over APRS?

 

Anybody know if it's possible to transfer text files, say a list of supplies needed, or people at a shelter, using APRS messaging?

Erik, WB0NIU

--
Sent from my Android device with K-9 Mail. Please excuse my brevity.


Re: Raspberry PI 3 and Pine64?

Ryan Tourge, N2YQT
 

The Pi 3 is real and the Pine is still in kickstarter land.

On Thu, Mar 3, 2016 at 11:01 AM, David Cooley n5xmt1@... [Raspberry_Pi_4-Ham_RADIO] <Raspberry_Pi_4-Ham_RADIO@...> wrote:
 

The Pi only comes with 1G memory. and 32 or 64 bit, 1G is still 1G.
--------------------------------------------
On Thu, 3/3/16, 'Benny D Miller Jr' w4qed@... [Raspberry_Pi_4-Ham_RADIO] <Raspberry_Pi_4-Ham_RADIO@...> wrote:

Subject: [Raspberry_Pi_4-Ham_RADIO] Raspberry PI 3 and Pine64?
To: Raspberry_Pi_4-Ham_RADIO@...
Date: Thursday, March 3, 2016, 5:24 AM


Hello all,   Anyone know the main
differences between the RPi 3 and the pine64? I haven’t
seen if the Pi 3 can be had with 2GB as yet, I think the
Pine64 can be ordered with it, does that make it a 1GB 64bit
wide? Perhaps the RPi 3 is similar?  



File transfer over APRS?

Erik Brom
 

Anybody know if it's possible to transfer text files, say a list of supplies needed, or people at a shelter, using APRS messaging?

Erik, WB0NIU

--
Sent from my Android device with K-9 Mail. Please excuse my brevity.


Re: Raspberry PI 3 and Pine64?

David Cooley
 

The Pi only comes with 1G memory. and 32 or 64 bit, 1G is still 1G.
--------------------------------------------

On Thu, 3/3/16, 'Benny D Miller Jr' w4qed@cfl.rr.com [Raspberry_Pi_4-Ham_RADIO] <Raspberry_Pi_4-Ham_RADIO@yahoogroups.com> wrote:


Subject: [Raspberry_Pi_4-Ham_RADIO] Raspberry PI 3 and Pine64?
To: Raspberry_Pi_4-Ham_RADIO@yahoogroups.com
Date: Thursday, March 3, 2016, 5:24 AM


Hello all,   Anyone know the main
differences between the RPi 3 and the pine64? I haven’t
seen if the Pi 3 can be had with 2GB as yet, I think the
Pine64 can be ordered with it, does that make it a 1GB 64bit
wide? Perhaps the RPi 3 is similar?


Re: New PI 3

Max
 

I have 6 Pi 2 B's and none of them lock the card in place, they can all be removed without any problem. The so called unlocking just makes it easier to grab ahold of. Maybe the new card holder will be stronger.

Max KG4PID


From: "Skyler Fennell electricity440@... [Raspberry_Pi_4-Ham_RADIO]"
To: Raspberry_Pi_4-Ham_RADIO@...
Sent: Thursday, March 3, 2016 8:37 AM
Subject: Re: [Raspberry_Pi_4-Ham_RADIO] Re: New PI 3

 
On the 2, if I popped the card in and then pulled it out without pushing it  in, it would not lock back in place. 


On Mar 2, 2016, at 04:51, zx97lite@... [Raspberry_Pi_4-Ham_RADIO] <Raspberry_Pi_4-Ham_RADIO@...> wrote:

 
Hi Jerry,

My understanding is that was done on purpose. Seems there were issues with the spring loaded locking mechanism failing, folks had to tape the SD Card in so it would not pop out.

Pete



Re: Raspberry PI 3 and Pine64?

Dave Cochran <dave@...>
 

Have you looked to see if the Orange Pi will meet your needs?  The one I have  ( the 2 Plus) has 2G RAM and 16g Flash..

Dave N0TRQ

On Mar 3, 2016 7:40 AM, "'Benny D Miller Jr' w4qed@... [Raspberry_Pi_4-Ham_RADIO]" <Raspberry_Pi_4-Ham_RADIO@...> wrote:
 

Hello all,

 

Anyone know the main differences between the RPi 3 and the pine64? I haven’t seen if the Pi 3 can be had with 2GB as yet, I think the Pine64 can be ordered with it, does that make it a 1GB 64bit wide? Perhaps the RPi 3 is similar?

 

Thanks,

 

Ben ARS w4qed

http://w4qed.hamshack.info:8080/ Pi-2

http://w4qed.hamshack.info:8008/ Same Pi-2

http://w4qed.hamshack.info:8086/ Same Pi-2

 


This email has been sent from a virus-free computer protected by Avast.
www.avast.com


--
This message has been scanned for viruses and dangerous content by
E.F.A. Project, and is believed to be clean.

8601 - 8620 of 14143