Date   

Re: Case for RaspPi and TNC-Pi

John
 

Take a look at Bud's "Pi Sandwich".  It's great for this application.  They are available in lots of different places, but here's a link to it at mouser:

http://www.mouser.com/ProductDetail/Bud-Industries/PS-11591/?qs=sGAEpiMZZMtCdQrAjLWEDA7SagWAVTmj

NB:  It's not the round one, that's a Pi Plate.

John W2FS


On Tue, May 27, 2014 at 1:39 PM, kg4pid@... [Raspberry_Pi_4-Ham_RADIO] <Raspberry_Pi_4-Ham_RADIO@...> wrote:
 

Does anyone make a case tall enough to hold a RasPi and the TNC-Pi? All the ones I've seen are too short.


Max KG4PID



Re: Case for RaspPi and TNC-Pi

 

I would love to see varieties on this theme.  

W4RFQ and I (ka2dew) are working on a housing that will hold the Raspberry PI plus 3 TNC-PI and a 12v power-pole input supply for the stack with backup power from an in-the-box 9v battery (diode switched).  

The box will give external access to all but composite video and audio ports, though the HDMI video and SDcard are recessed. Ethernet, USB and TNC/radio connectors are flush to the housing.  

I am guessing end of June and we will probably distribute a solid works file.  
  Tadd/ka2dew


On May 27, 2014, at 1:39 PM, "kg4pid@... [Raspberry_Pi_4-Ham_RADIO]" <Raspberry_Pi_4-Ham_RADIO@...> wrote:

 

Does anyone make a case tall enough to hold a RasPi and the TNC-Pi? All the ones I've seen are too short.


Max KG4PID


Re: Time lapse photography

Ronny Julian <k4rjjradio@...>
 

Yep.  That was a good segment for Peter.  I have watched ALTV since the start.
Ham Nation and Ham Radio Now are great too. 

Anyone want to do a Podcast?  RadioPi comes to mind as a name.



On Tue, May 27, 2014 at 12:06 PM, Dale Miller stpatrick2@... [Raspberry_Pi_4-Ham_RADIO] <Raspberry_Pi_4-Ham_RADIO@...> wrote:
 

On 5/27/2014 10:57 AM, Ronny Julian k4rjjradio@... [Raspberry_Pi_4-Ham_RADIO] wrote:
Watch ALTV 62.  Peter has a cool plan to do this.  I'm not a fan of it autostarting and just pulling out the power.


Ronny
K4RJJ



How ironic Ronny, I just sent that same answer. :)



--
All the Best & 73's
Dale Miller, KC2CBD
Cookeville, Tennessee
Ham Operator since 1997 (Extra)


Registered Linux User: #317401
Linux since June 2003
Registered Ubuntu User #26423


stpatrick3spam@...
stpatrick2spam@...
stpatrick3spam@...
bdchimneysweepspam@...


(cut the spam to reply)


__



Case for RaspPi and TNC-Pi

Max
 

Does anyone make a case tall enough to hold a RasPi and the TNC-Pi? All the ones I've seen are too short.


Max KG4PID


Re: Time lapse photography

James French
 

If this helps out, here's a book that I found interesting about doing just that:
Raspberry Pi for Secret Agents

Here's the pdf download that I found after I had checked it out at the local
library:
http://it-ebooks.info/book/2929/

James W8ISS


On Tue, May 27, 2014 at 12:06 PM, Dale Miller stpatrick2@... [Raspberry_Pi_4-Ham_RADIO] <Raspberry_Pi_4-Ham_RADIO@...> wrote:
 

On 5/27/2014 10:57 AM, Ronny Julian k4rjjradio@... [Raspberry_Pi_4-Ham_RADIO] wrote:
Watch ALTV 62.  Peter has a cool plan to do this.  I'm not a fan of it autostarting and just pulling out the power.


Ronny
K4RJJ



How ironic Ronny, I just sent that same answer. :)



--
All the Best & 73's
Dale Miller, KC2CBD
Cookeville, Tennessee
Ham Operator since 1997 (Extra)

Registered Linux User: #317401
Linux since June 2003
Registered Ubuntu User #26423

stpatrick3spam@...
stpatrick2spam@...
stpatrick3spam@...
bdchimneysweepspam@...

(cut the spam to reply)

__



Re: Time lapse photography

Dale Miller - KC2CBD
 

On 5/27/2014 10:57 AM, Ronny Julian k4rjjradio@... [Raspberry_Pi_4-Ham_RADIO] wrote:
Watch ALTV 62.  Peter has a cool plan to do this.  I'm not a fan of it autostarting and just pulling out the power.


Ronny
K4RJJ



How ironic Ronny, I just sent that same answer. :)


-- 
All the Best & 73's
Dale Miller, KC2CBD
Cookeville, Tennessee
Ham Operator since 1997 (Extra)

Registered Linux User: #317401
Linux since June 2003
Registered Ubuntu User #26423

stpatrick3spam@...
stpatrick2spam@...
stpatrick3spam@...
bdchimneysweepspam@...

(cut the spam to reply)

__


Re: Time lapse photography

Dale Miller - KC2CBD
 

On 5/27/2014 10:11 AM, k6acj@... [Raspberry_Pi_4-Ham_RADIO] wrote:

I am getting ready for FD and want to setup a Pi with Pi-Cam for time lapse photography of the FD event.  I know a tiny bit about motion software when using a Logitech web cam but am not sure if it works with the Element 14 Pi Camera module.    Has anyone used Motion and the Pi-Cam, I'd like to use the feature to record when there is motion only to save some space on the 500 gig external hard drive used for storage.  My Logitech/Motion combo seems to record all the time.   Bill k6acj


Check out AmateurLogic Episode 62
< http://www.amateurlogic.tv/blog/?p=534 >
And the show notes are at the wiki here
< http://amateurlogic.tv/wiki/doku.php?id=amateurlogic_episode_62 >



-- 
All the Best & 73's
Dale Miller, KC2CBD
Cookeville, Tennessee
Ham Operator since 1997 (Extra)

Registered Linux User: #317401
Linux since June 2003
Registered Ubuntu User #26423

stpatrick3spam@...
stpatrick2spam@...
stpatrick3spam@...
bdchimneysweepspam@...

(cut the spam to reply)

__


Re: Time lapse photography

Ronny Julian <k4rjjradio@...>
 

Watch ALTV 62.  Peter has a cool plan to do this.  I'm not a fan of it autostarting and just pulling out the power.


Ronny
K4RJJ



On Tue, May 27, 2014 at 11:11 AM, k6acj@... [Raspberry_Pi_4-Ham_RADIO] <Raspberry_Pi_4-Ham_RADIO@...> wrote:
 

I am getting ready for FD and want to setup a Pi with Pi-Cam for time lapse photography of the FD event.  I know a tiny bit about motion software when using a Logitech web cam but am not sure if it works with the Element 14 Pi Camera module.    Has anyone used Motion and the Pi-Cam, I'd like to use the feature to record when there is motion only to save some space on the 500 gig external hard drive used for storage.  My Logitech/Motion combo seems to record all the time.   Bill k6acj



Re: Time lapse photography

Max
 

If you are talking about the Raspberry Pi Foundation camera then yes it does work with motion. I have one set up pointing at my driveway and it only takes pictures when there is motion. There was a special motion-mmal file that made it work. It been so long I don't remember how I set it up though. I THINK this is the discussion where I got the info.


Hope this helps, Max KG4PID

From: "k6acj@... [Raspberry_Pi_4-Ham_RADIO]"
To: Raspberry_Pi_4-Ham_RADIO@...
Sent: Tuesday, May 27, 2014 10:11 AM
Subject: [Raspberry_Pi_4-Ham_RADIO] Time lapse photography

 
I am getting ready for FD and want to setup a Pi with Pi-Cam for time lapse photography of the FD event.  I know a tiny bit about motion software when using a Logitech web cam but am not sure if it works with the Element 14 Pi Camera module.    Has anyone used Motion and the Pi-Cam, I'd like to use the feature to record when there is motion only to save some space on the 500 gig external hard drive used for storage.  My Logitech/Motion combo seems to record all the time.   Bill k6acj



Time lapse photography

k6acj
 

I am getting ready for FD and want to setup a Pi with Pi-Cam for time lapse photography of the FD event.  I know a tiny bit about motion software when using a Logitech web cam but am not sure if it works with the Element 14 Pi Camera module.    Has anyone used Motion and the Pi-Cam, I'd like to use the feature to record when there is motion only to save some space on the 500 gig external hard drive used for storage.  My Logitech/Motion combo seems to record all the time.   Bill k6acj


Re: Wired and Tested Version of the TNC-Pi Now Available.

Joe DeAngelo
 

Good job !!!

Love that little board. Have 5 of my own, built from kits.
Thanks for that little gem!
Joe
AG6QO@AG6QO.#NCA.CA.USA.NOAM


Re: Newer Rpi's

Joe DeAngelo
 

Well, I solved my boot problem. It had NOTHING to do with SD cards.

Apparently, there was a known bootstrap problem with Rpi using Micron CPUs, which was fixed in a September 2013 version of the Raspbian distro.

If you are suddenly having problems with an image that worked on older boards, check your CPU. If it's a Micron chip, you may want to try what I had to do.

I had to update and upgrade. Unfortunately, it also required an update and upgrade of AX25, FPAC, and FBB as well.

This process, once I figured it all out, took about an hour and one half to complete. (I'm overlooking the weeks worth of trying EVERYTHING I could think of while assuming it was something in MY configuration that was at fault!).

But works like a charm now!

Here's a summary of what I experienced:
Amateur Radio Station AG6QO - Rpi FBB won't boot

 


73,
Joe
AG6QO@AG6QO.#NCA.CA.USA.NOAM


Wired and Tested Version of the TNC-Pi Now Available.

John
 

For those of you who have wanted to get going with a TNC-Pi but were concerned about building the kit version, we now have available a wired and tested version.  I've held off offering this because I've had trouble keeping up with the demand for kits.  However, I now have someone on retainer to build them and I test each one myself before shipping.  Both kits and wired and tested units are available at:

http://www.tnc-x.com/TNCPi.htm

73,

John Hansen W2FS
Coastal ChipWorks

 


Re: [pcrepeatercontroller] DV3000 Info

 

Hi Adrian,

We don't currently have any plans to offer the DV3000 in a USB or other factor.

However, as Jonathan points out.  The implementation of the dv3000d on the Raspberry Pi (and hopefully the Banana Pi) makes the device available over a network using UDP without some of the issues and headaches of the USB interface.

The GPIO interface is to a simple UART  (Gnd, V+, TX, RX, RTS) and if you can match the voltage and baud rate, then interfacing with other processors and adapters is pretty straightforward. 


John D. Hays
K7VE
PO Box 1223, Edmonds, WA 98020-1223 
  





On Wed, May 21, 2014 at 7:32 AM, Adrian <vk4tux@...> wrote:
John as a DV3000 customer , I am interested in using the DV3000 not only on the Banana/raspberry Pi's but
as a usb dongle with some help from a adapter like this ;


Re: New Product from NW Digital Radio

YT9TP - Pedja
 

On 20.05.2014 20:01, Mike Brogan g8jhe@... [Raspberry_Pi_4-Ham_RADIO] wrote:
 

WHY do people take trimming to extremes!!!!!

There is absolutely NO INDICATION of what question this post is answering!

Fine if you read the thread online but useless if you have the group delivered to your mailbox and the question originated days (or even 24 hours or so) ago - the question probably got deleted and filed away somewhere in the back of the brain.

Please leave at least the original question attached to replies so we all know what is being talked about, alternatively, if you don't think others will be interested, reply direct to the sender of the original question.


Agree. But in Thunderbird there is an option to view messages grouped by thread. Very useful.





This email is free from viruses and malware because avast! Antivirus protection is active.



Re: New Product from NW Digital Radio

Mike Brogan
 

No offence taken, was just trying to make a general point about trimming - some people are taking it to silly extremes, you are far from alone.......

Just asking people to be sensible about it :-)


On 21/05/2014 01:13, Ronny Julian k4rjjradio@... [Raspberry_Pi_4-Ham_RADIO] wrote:
 
The question was what does the new board work with as far as software.  Sorry to offend. 



On Tue, May 20, 2014 at 2:01 PM, Mike Brogan g8jhe@... [Raspberry_Pi_4-Ham_RADIO] <Raspberry_Pi_4-Ham_RADIO@...> wrote:
 

WHY do people take trimming to extremes!!!!!

There is absolutely NO INDICATION of what question this post is answering!

Fine if you read the thread online but useless if you have the group delivered to your mailbox and the question originated days (or even 24 hours or so) ago - the question probably got deleted and filed away somewhere in the back of the brain.

Please leave at least the original question attached to replies so we all know what is being talked about, alternatively, if you don't think others will be interested, reply direct to the sender of the original question.

Perhaps I should delete the rest of the message so no one knows what I am talking about ;-)




.


-- 
Mike Brogan


g8jhe@...
g8jhe.radio@...


Re: New Product from NW Digital Radio

Ronny Julian <k4rjjradio@...>
 

John is it fully assembled?  I am sure it probably is but I always ask because I have bought something I thought was and ended up with a pile of parts I am not too good at soldering with my eyesight.

I may not make the first run (8 to go) as Payday is Wednesday.  I will be in the next run for sure. 


On Tue, May 20, 2014 at 12:22 PM, john@... [Raspberry_Pi_4-Ham_RADIO] <Raspberry_Pi_4-Ham_RADIO@...> wrote:
 

The short answer is Yes.

See http://nwdigitalradio.com/blog


Once that is complete, then you can use DummyRepeater and ircDDBGateway to perform the same function as the DVDongle and more.

The first run is almost depleted.



Re: New Product from NW Digital Radio

Ronny Julian <k4rjjradio@...>
 

The question was what does the new board work with as far as software.  Sorry to offend. 



On Tue, May 20, 2014 at 2:01 PM, Mike Brogan g8jhe@... [Raspberry_Pi_4-Ham_RADIO] <Raspberry_Pi_4-Ham_RADIO@...> wrote:
 

WHY do people take trimming to extremes!!!!!

There is absolutely NO INDICATION of what question this post is answering!

Fine if you read the thread online but useless if you have the group delivered to your mailbox and the question originated days (or even 24 hours or so) ago - the question probably got deleted and filed away somewhere in the back of the brain.

Please leave at least the original question attached to replies so we all know what is being talked about, alternatively, if you don't think others will be interested, reply direct to the sender of the original question.

Perhaps I should delete the rest of the message so no one knows what I am talking about ;-)


On 20/05/2014 17:22, john@... [Raspberry_Pi_4-Ham_RADIO] wrote:
 

The short answer is Yes.

See http://nwdigitalradio.com/blog


Once that is complete, then you can use DummyRepeater and ircDDBGateway to perform the same function as the DVDongle and more.

The first run is almost depleted.

--
Mike Brogan


g8jhe@...
g8jhe.radio@...



Re: New Product from NW Digital Radio

Mike Brogan
 

WHY do people take trimming to extremes!!!!!

There is absolutely NO INDICATION of what question this post is answering!

Fine if you read the thread online but useless if you have the group delivered to your mailbox and the question originated days (or even 24 hours or so) ago - the question probably got deleted and filed away somewhere in the back of the brain.

Please leave at least the original question attached to replies so we all know what is being talked about, alternatively, if you don't think others will be interested, reply direct to the sender of the original question.

Perhaps I should delete the rest of the message so no one knows what I am talking about ;-)


On 20/05/2014 17:22, john@... [Raspberry_Pi_4-Ham_RADIO] wrote:
 

The short answer is Yes.

See http://nwdigitalradio.com/blog


Once that is complete, then you can use DummyRepeater and ircDDBGateway to perform the same function as the DVDongle and more.

The first run is almost depleted.

-- 
Mike Brogan

g8jhe@...
g8jhe.radio@...


Re: New Product from NW Digital Radio

 

The short answer is Yes.

See http://nwdigitalradio.com/blog

Once that is complete, then you can use DummyRepeater and ircDDBGateway to perform the same function as the DVDongle and more.

The first run is almost depleted.

10861 - 10880 of 14072