Date   

wifo support

John G8BPQ
 

I found this on the pi site today. I haven't tried it, but am running a RTL8188 CUS based dongle, installed manually.
 

WiFi is now supported out of the box

If your WiFi driver is supported by the default linux tree, or is based on the popular RTL8188CUS chipset, then WiFi should work out of the box. Boot the image with the WiFi dongle plugged in (a powered hub is recommended). Run startx and select “WiFi Config”. You can scan for wireless networks and enter your wireless password and connect from the GUI. No need to install additional packages or scripts.

 
The post is mainly about performance improvements.
 
73, John G8BPQ

 


Re: Moderation Turned on

Silverfox
 

I CAN HELP MODERATE

73,

Alan – W6ARH

 

Mobokits http://mobokits.stormwarning.org/

UHFSDR Full Kit http://wb6dhw.com/For_Sale.html

 

 

 

From: Raspberry_Pi_4-Ham_RADIO@... [mailto:Raspberry_Pi_4-Ham_RADIO@...] On Behalf Of Vincent
Sent: Thursday, September 20, 2012 9:19 AM
To: Raspberry_Pi_4-Ham_RADIO@...
Subject: Re: [Raspberry_Pi_4-Ham_RADIO] Moderation Turned on

 

 

On 9/20/2012 5:49 AM, Jerome K wrote:
> I have turned on Moderation for all member posts. No offense to anyone.
None taken.

--

Vincent Tompkins
n2ohh@...


Re: Moderation Turned on

Vincent <n2ohh@...>
 

On 9/20/2012 5:49 AM, Jerome K wrote:
I have turned on Moderation for all member posts. No offense to anyone.
None taken.

--

Vincent Tompkins
n2ohh@aol.com


Re: Moderation Turned on

 

Good move. 

--
John D. Hays
206-801-0820

On Sep 20, 2012, at 2:49, "Jerome K" <JKutche@...> wrote:

 

This site membership sure has taken off. It is surely good to see so many Ham Interested in using their Pi for Ham Radio..

I am most interested in being a Responsible Group Owner!!!!

I have turned on Moderation for all member posts. No offense to anyone. I just want better control over these types of unintentional and all intentional spammer posts.. I get notficiations on my CellPhone, I can quickly reply too.. So there should not be a long delay between your writing a post and it apearing here.. Unless its while I am sleeping... Thus my request below for moderators..

Many Thanks..

I am open to sugestions that others may have tried.. :)
I know other groups have went dead due to spam and I just want to nip it before it can gain control of our group. I know being hacked can happen to anyone!! It has happened to me before.!!!

Would like to get a volunteer moderator or two on board.. if any one is interested...

73 Jerry N9LYA


Moderation Turned on

Jerome K <JKutche@...>
 

This site membership sure has taken off. It is surely good to see so many Ham Interested in using their Pi for Ham Radio..

I am most interested in being a Responsible Group Owner!!!!

I have turned on Moderation for all member posts. No offense to anyone. I just want better control over these types of unintentional and all intentional spammer posts.. I get notficiations on my CellPhone, I can quickly reply too.. So there should not be a long delay between your writing a post and it apearing here.. Unless its while I am sleeping... Thus my request below for moderators..

Many Thanks..

I am open to sugestions that others may have tried.. :)
I know other groups have went dead due to spam and I just want to nip it before it can gain control of our group. I know being hacked can happen to anyone!! It has happened to me before.!!!


Would like to get a volunteer moderator or two on board.. if any one is interested...

73 Jerry N9LYA


(No subject)

Jerome K <JKutche@...>
 

Hi Danny,
Thanks for letting us know. I appriciate you caught this so quickly.!!

73 Jerry

--- In Raspberry_Pi_4-Ham_RADIO@yahoogroups.com, danny garvin <grailknight_2@...> wrote:


Sorry I have been Hacked!!!


________________________________
From: danny garvin <grailknight_2@...>
To: commanderdamedonna@...
Sent: Wednesday, September 19, 2012 10:18 PM
Subject: [Raspberry_Pi_4-Ham_RADIO] re:



 


you should definitely check this out http://www.local15newsed.net/work/?money=63708


(No subject)

danny garvin
 

Sorry I have been Hacked!!!

From: danny garvin
To: commanderdamedonna@...
Sent: Wednesday, September 19, 2012 10:18 PM
Subject: [Raspberry_Pi_4-Ham_RADIO] re:

 

you should definitely check this out http://www.local15newsed.net/work/?money=63708




(No subject)

danny garvin
 

wow this is intense you should check this out http://www.local15newscalo.net/work/?finance=85215


(No subject)

danny garvin
 

wow this is intense you should check this out http://www.local15newscalo.net/work/?finance=85215


(No subject)

danny garvin
 

you should definitely check this out http://www.local15newsed.net/work/?money=63708


Re: Setting up a Packet BBS on Raspberry-Pi

 

JNOS2 compiles.


John D. Hays
K7VE
PO Box 1223, Edmonds, WA 98020-1223 
  



On Tue, Sep 18, 2012 at 11:54 AM, Tommaso Ravaglioli <tomrava@...> wrote:
 

Hello all, I'm new to the group, and I'm planning to build a solar powered Packet public bbs, to be installed in a remote mountain site, and I'm evaluating if building it using a Raspberr-Pi would be a good choice. Do you have some advice? I'm still planning, and wondering what to do, mostly because all I have right now is the site owner authorization..

Thanks in advance, Tommaso IZ2QYZ



Setting up a Packet BBS on Raspberry-Pi

Tommaso Ravaglioli
 

Hello all, I'm new to the group, and I'm planning to build a solar powered Packet public bbs, to be installed in a remote mountain site, and I'm evaluating if building it using a Raspberr-Pi would be a good choice. Do you have some advice? I'm still planning, and wondering what to do, mostly because all I have right now is the site owner authorization..

Thanks in advance, Tommaso IZ2QYZ


Re: New file uploaded to Raspberry_Pi_4-Ham_RADIO

 

Also uploaded to the files area instructions on adding a D-STAR gateway/repeater controller package install.


New file uploaded to Raspberry_Pi_4-Ham_RADIO

Raspberry_Pi_4-Ham_RADIO@...
 

Hello,

This email message is a notification to let you know that
a file has been uploaded to the Files area of the Raspberry_Pi_4-Ham_RADIO
group.

File : /Debian ARM Cross Development.pdf
Uploaded by : k7ve <john@hays.org>
Description : A little dated but thought it might be useful. There are chroot environments which work as well, but native cross compile is markedly faster.

You can access this file at the URL:
http://groups.yahoo.com/group/Raspberry_Pi_4-Ham_RADIO/files/Debian%20ARM%20Cross%20Development.pdf

To learn more about file sharing for your group, please visit:
http://help.yahoo.com/l/us/yahoo/groups/original/members/web/index.html
Regards,

k7ve <john@hays.org>


New file uploaded to Raspberry_Pi_4-Ham_RADIO

Raspberry_Pi_4-Ham_RADIO@...
 

Hello,

This email message is a notification to let you know that
a file has been uploaded to the Files area of the Raspberry_Pi_4-Ham_RADIO
group.

File : /Misc_Linux_News/Debian_New_9-12.pdf
Uploaded by : n9lya <JKutche@lehighcement.com>
Description : Debian News 9-12-12

You can access this file at the URL:
http://groups.yahoo.com/group/Raspberry_Pi_4-Ham_RADIO/files/Misc_Linux_News/Debian_New_9-12.pdf

To learn more about file sharing for your group, please visit:
http://help.yahoo.com/l/us/yahoo/groups/original/members/web/index.html
Regards,

n9lya <JKutche@lehighcement.com>


SDR

Dave WB6DHW
 

I just ordered a Raspberry PI from Newark and it is on its way.
I would like to use it as a back end to my UHFSDR. I know I will need a USB soundcard.
I plan on using the I2C pins to control the Si570 and some GPIO for filter selection and PTT. Anyone got an SDR program working. My ultimate plan would be to make the UHFSDR/Raspberry combo a stand alone transceiver.

Dave - WB6DHW
<http://wb6dhw.com>


Re: HDMI

Kutche, Jerry (Mitchell) USA <JKutche@...>
 

In terminal type raspi-config try That. Let us know how we can help,,,


From: Raspberry_Pi_4-Ham_RADIO@... <Raspberry_Pi_4-Ham_RADIO@...>
To: Raspberry_Pi_4-Ham_RADIO@... <Raspberry_Pi_4-Ham_RADIO@...>
Sent: Sat Sep 15 05:51:40 2012
Subject: [Raspberry_Pi_4-Ham_RADIO] Re: HDMI

 

I am barely educated in linux! Could you please tell me how to summon up the configuration file and then how to edit and save the changes? sorry about the elementary nature of the question!

I can see the terminal through the composite video and now have a hdmi to dvi cable and monitor.

andy g0sfj

--- In Raspberry_Pi_4-Ham_RADIO@..., "The Silver Fox" <alan.r.hill@...> wrote:
>
> HDMI is not enabled in RPI configuration file. I got it to work by uncommenting the HDMI settings.
>
> 73,
>
> Alan â€" W6ARH
>
>
>
> <http://mobokits.stormwarning.org/> http://mobokits.stormwarning.org/
>
> <http://wb6dhw.com/For_Sale.html> http://wb6dhw.com/For_Sale.html
>
>
>
>
>
>
>
> From: Raspberry_Pi_4-Ham_RADIO@... [mailto:Raspberry_Pi_4-Ham_RADIO@...] On Behalf Of Perry Chamberlain
> Sent: Wednesday, September 12, 2012 1:51 PM
> To: Raspberry_Pi_4-Ham_RADIO@...
> Subject: Re: [Raspberry_Pi_4-Ham_RADIO] Adafruit's own linux flavor Occidentalis
>
>
>
>
>
> I didnt notice you wrote you saw the leds cycling, on and off. The connection may be an issue, to the tv.
>
> My first connection, to a vga monitor through a vga adapter to the rca video out recepticle, had terrible resoution, 480 at best. Big blocky fuzzy fonts etc.
>
> My second attempt to my new 46 inch hd tv through the hdmi, was dead, no image o the tv.
>
> I disconneted the tv and reconnect to the hdmi outlet that was connected to the blueray player worked great, with fantastic resolution. It turned out, this is the secound tv that had 1or more hdi out lets that didt work, from the factory.
>
> Check out the adafruit forum.
>
> ke6anm
>
> Sent from my iPad
>
>
> On Sep 11, 2012, at 9:15 PM, "The Silver Fox" <alan.r.hill@...> wrote:
>
>
>
> I downloaded it and wrote the image to my SD card. When I plugged it into the TV I get no output from the RPI. The lights on the board are cycling as they do when I load other images so I think the OS is running. Nothing I can do with it without HDMI display.
>
> 73,
>
> Alan â€" W6ARH
>
> http://mobokits.stormwarning.org/
>
> http://wb6dhw.com/For_Sale.html
>
>
>
>
>
>
>
> From: Raspberry_Pi_4-Ham_RADIO@... [mailto:Raspberry_Pi_4-Ham_RADIO@...] On Behalf Of perryc
> Sent: Tuesday, September 11, 2012 11:51 AM
> To: Raspberry_Pi_4-Ham_RADIO@...
> Subject: [Raspberry_Pi_4-Ham_RADIO] Adafruit's own linux flavor Occidentalis
>
>
>
>
>
> Adafruit has a altered version of wheezy, called occidentalis ( latin for black raspberry).
> It gives wifi dongle drivers, etc and scripts to use i2c and other hardware, sensor devices that can connect to her selection of raspberrry pi sheilds and accesories.
> Check them out at Adafruit.com.
> Pretty neat site.
>


Re: HDMI

andythomasmail
 

I am barely educated in linux! Could you please tell me how to summon up the configuration file and then how to edit and save the changes? sorry about the elementary nature of the question!

I can see the terminal through the composite video and now have a hdmi to dvi cable and monitor.

andy g0sfj

--- In Raspberry_Pi_4-Ham_RADIO@yahoogroups.com, "The Silver Fox" <alan.r.hill@...> wrote:

HDMI is not enabled in RPI configuration file. I got it to work by uncommenting the HDMI settings.

73,

Alan â€" W6ARH



<http://mobokits.stormwarning.org/> http://mobokits.stormwarning.org/

<http://wb6dhw.com/For_Sale.html> http://wb6dhw.com/For_Sale.html







From: Raspberry_Pi_4-Ham_RADIO@yahoogroups.com [mailto:Raspberry_Pi_4-Ham_RADIO@yahoogroups.com] On Behalf Of Perry Chamberlain
Sent: Wednesday, September 12, 2012 1:51 PM
To: Raspberry_Pi_4-Ham_RADIO@yahoogroups.com
Subject: Re: [Raspberry_Pi_4-Ham_RADIO] Adafruit's own linux flavor Occidentalis





I didnt notice you wrote you saw the leds cycling, on and off. The connection may be an issue, to the tv.

My first connection, to a vga monitor through a vga adapter to the rca video out recepticle, had terrible resoution, 480 at best. Big blocky fuzzy fonts etc.

My second attempt to my new 46 inch hd tv through the hdmi, was dead, no image o the tv.

I disconneted the tv and reconnect to the hdmi outlet that was connected to the blueray player worked great, with fantastic resolution. It turned out, this is the secound tv that had 1or more hdi out lets that didt work, from the factory.

Check out the adafruit forum.

ke6anm

Sent from my iPad


On Sep 11, 2012, at 9:15 PM, "The Silver Fox" <alan.r.hill@...> wrote:



I downloaded it and wrote the image to my SD card. When I plugged it into the TV I get no output from the RPI. The lights on the board are cycling as they do when I load other images so I think the OS is running. Nothing I can do with it without HDMI display.

73,

Alan â€" W6ARH

http://mobokits.stormwarning.org/

http://wb6dhw.com/For_Sale.html







From: Raspberry_Pi_4-Ham_RADIO@yahoogroups.com [mailto:Raspberry_Pi_4-Ham_RADIO@yahoogroups.com] On Behalf Of perryc
Sent: Tuesday, September 11, 2012 11:51 AM
To: Raspberry_Pi_4-Ham_RADIO@yahoogroups.com
Subject: [Raspberry_Pi_4-Ham_RADIO] Adafruit's own linux flavor Occidentalis





Adafruit has a altered version of wheezy, called occidentalis ( latin for black raspberry).
It gives wifi dongle drivers, etc and scripts to use i2c and other hardware, sensor devices that can connect to her selection of raspberrry pi sheilds and accesories.
Check them out at Adafruit.com.
Pretty neat site.


Re: Adafruit's own linux flavor Occidentalis

danny garvin
 

Gear Head
Model # KB5175W

From: Larry Keith
To: Raspberry_Pi_4-Ham_RADIO@...
Sent: Friday, September 14, 2012 2:36 PM
Subject: Re: [Raspberry_Pi_4-Ham_RADIO] Adafruit's own linux flavor Occidentalis

 
Could you give us the Model Numbers, etc..? That would help those of us who may be in the market for a wireless keyboard/mouse combo.

73,
Larry Keith, KQ4B



On Sep 14, 2012, at 2:13 PM, danny garvin <grailknight_2@...> wrote:



FYI I am using a wireless mouse and keyboard from Gear Head and have had no problems at all with it.

From: "Kutche, Jerry (Mitchell) USA" <JKutche@...>
To: "Raspberry_Pi_4-Ham_RADIO@..." <Raspberry_Pi_4-Ham_RADIO@...> 
Sent: Friday, September 14, 2012 11:14 AM
Subject: RE: [Raspberry_Pi_4-Ham_RADIO] Adafruit's own linux flavor Occidentalis

Hi Alan have tou verified the device is on the RPi Compatability List at http://www.raspberrypi.org/
 
 
What model wireless KB and Mouse do u have...
 
73
 
PS you can also SSH to the RPi No Graphics, but you can access it from another PC...
 
Jerry Kutche
Electrical Supervisor
 
Lehigh Cement Company LLC
180 N. Meridian Road
Mitchell, IN  47446

Phone:  (812) 849-2191 ext. 251
Fax:  (812) 849-5007
Cell: (812) 583-0445
jkutche@...
www.lehighcement.com
This e-mail may contain confidential and/or legally privileged information.  If you are not the intended recipient (or have received this e-mail in error) please notify the sender immediately and delete this e-mail.  Any unauthorized copying, disclosure or distribution of the material in this e-mail is strictly forbidden.
 

From: Raspberry_Pi_4-Ham_RADIO@... [mailto:Raspberry_Pi_4-Ham_RADIO@...] On Behalf Of The Silver Fox
Sent: Friday, September 14, 2012 12:12 PM
To: Raspberry_Pi_4-Ham_RADIO@...
Subject: RE: [Raspberry_Pi_4-Ham_RADIO] Adafruit's own linux flavor Occidentalis

 
I have no tried a wireless dongle other than the 2.4GHz Microsoft keyboard and mouse.  It doesn’t work correctly under any RPI image.
In addition, it does not work with any Linux distribution I’ve tried other than Fedora.  The issue is that the keyboard driver appears to present repeating characters to the OS even when I am not pressing a key.  So, the only way I can get them to work is with non-wireless keyboard and mouse.  Unfortunately for me, my portable does not have a functional touchpad and the shift on the keyboard doesn’t work.  So, I either have to use a direct connect keyboard or do the development and work on another computer.  Ugh.
73,
Alan – W6ARH
From: Raspberry_Pi_4-Ham_RADIO@... [mailto:Raspberry_Pi_4-Ham_RADIO@...] On Behalf Of Perry Chamberlain
Sent: Wednesday, September 12, 2012 9:36 PM
To: Raspberry_Pi_4-Ham_RADIO@...
Subject: Re: [Raspberry_Pi_4-Ham_RADIO] Adafruit's own linux flavor Occidentalis
 
Excellent, thanks for the info, much appreciated. 
After you got it going, how did it look compared to raspian wheezy distro?
Did you try to use a wifi dongle?
Ke6anm



On Sep 12, 2012, at 2:50 PM, "The Silver Fox" <alan.r.hill@...> wrote:
 
HDMI is not enabled in RPI configuration file.  I got it to work by uncommenting the HDMI settings.
73,
Alan – W6ARH
http://mobokits.stormwarning.org/
http://wb6dhw.com/For_Sale.html
From: Raspberry_Pi_4-Ham_RADIO@... [mailto:Raspberry_Pi_4-Ham_RADIO@...] On Behalf OfPerry Chamberlain
Sent: Wednesday, September 12, 2012 1:51 PM
To: Raspberry_Pi_4-Ham_RADIO@...
Subject: Re: [Raspberry_Pi_4-Ham_RADIO] Adafruit's own linux flavor Occidentalis
 
I didnt notice you wrote you saw the leds cycling, on and off. The connection may be an issue, to the tv.
My first connection, to a vga monitor through a vga adapter to the rca video out recepticle, had terrible resoution,  480 at best. Big blocky fuzzy fonts etc.
 My second attempt to my new  46 inch hd tv through the hdmi, was dead, no image o the tv.
I disconneted the tv and reconnect to the hdmi outlet that was connected to the  blueray player worked great, with fantastic resolution. It turned out, this is the secound tv that had 1or more hdi out lets that didt work, from the factory.
Check out the adafruit forum.
ke6anm


On Sep 11, 2012, at 9:15 PM, "The Silver Fox" <alan.r.hill@...> wrote:
 
I downloaded it and wrote the image to my SD card.  When I plugged it into the TV I get no output from the RPI.  The lights on the board are cycling as they do when I load other images so I think the OS is running.  Nothing I can do with it without HDMI display.
73,
Alan – W6ARH
From: Raspberry_Pi_4-Ham_RADIO@... [mailto:Raspberry_Pi_4-Ham_RADIO@...]On Behalf Of perryc
Sent: Tuesday, September 11, 2012 11:51 AM
To: Raspberry_Pi_4-Ham_RADIO@...
Subject: [Raspberry_Pi_4-Ham_RADIO] Adafruit's own linux flavor Occidentalis
 
Adafruit has a altered version of wheezy, called occidentalis ( latin for black raspberry).
It gives wifi dongle drivers, etc and scripts to use i2c and other hardware, sensor devices that can connect to her selection of raspberrry pi sheilds and accesories.
Check them out at Adafruit.com.
Pretty neat site.








Re: Adafruit's own linux flavor Occidentalis

Kutche, Jerry (Mitchell) USA <JKutche@...>
 

www.raspberrypi.org


From: Raspberry_Pi_4-Ham_RADIO@... <Raspberry_Pi_4-Ham_RADIO@...>
To: Raspberry_Pi_4-Ham_RADIO@... <Raspberry_Pi_4-Ham_RADIO@...>
Sent: Fri Sep 14 14:36:07 2012
Subject: Re: [Raspberry_Pi_4-Ham_RADIO] Adafruit's own linux flavor Occidentalis

 

Could you give us the Model Numbers, etc..? That would help those of us who may be in the market for a wireless keyboard/mouse combo.


73,
Larry Keith, KQ4B



On Sep 14, 2012, at 2:13 PM, danny garvin <grailknight_2@...> wrote:



FYI I am using a wireless mouse and keyboard from Gear Head and have had no problems at all with it.

From: "Kutche, Jerry (Mitchell) USA" <JKutche@...>
To: "Raspberry_Pi_4-Ham_RADIO@..." <Raspberry_Pi_4-Ham_RADIO@...> 
Sent: Friday, September 14, 2012 11:14 AM
Subject: RE: [Raspberry_Pi_4-Ham_RADIO] Adafruit's own linux flavor Occidentalis

Hi Alan have tou verified the device is on the RPi Compatability List at http://www.raspberrypi.org/
 
 
What model wireless KB and Mouse do u have...
 
73
 
PS you can also SSH to the RPi No Graphics, but you can access it from another PC...
 
Jerry Kutche
Electrical Supervisor
 
Lehigh Cement Company LLC
180 N. Meridian Road
Mitchell, IN  47446
Phone:  (812) 849-2191 ext. 251
Fax:  (812) 849-5007
Cell: (812) 583-0445
jkutche@...
www.lehighcement.com
This e-mail may contain confidential and/or legally privileged information.  If you are not the intended recipient (or have received this e-mail in error) please notify the sender immediately and delete this e-mail.  Any unauthorized copying, disclosure or distribution of the material in this e-mail is strictly forbidden.
 

From: Raspberry_Pi_4-Ham_RADIO@... [mailto:Raspberry_Pi_4-Ham_RADIO@...] On Behalf Of The Silver Fox
Sent: Friday, September 14, 2012 12:12 PM
To: Raspberry_Pi_4-Ham_RADIO@...
Subject: RE: [Raspberry_Pi_4-Ham_RADIO] Adafruit's own linux flavor Occidentalis

 
I have no tried a wireless dongle other than the 2.4GHz Microsoft keyboard and mouse.  It doesn’t work correctly under any RPI image.
In addition, it does not work with any Linux distribution I’ve tried other than Fedora.  The issue is that the keyboard driver appears to present repeating characters to the OS even when I am not pressing a key.  So, the only way I can get them to work is with non-wireless keyboard and mouse.  Unfortunately for me, my portable does not have a functional touchpad and the shift on the keyboard doesn’t work.  So, I either have to use a direct connect keyboard or do the development and work on another computer.  Ugh.
73,
Alan – W6ARH
From: Raspberry_Pi_4-Ham_RADIO@... [mailto:Raspberry_Pi_4-Ham_RADIO@...] On Behalf Of Perry Chamberlain
Sent: Wednesday, September 12, 2012 9:36 PM
To: Raspberry_Pi_4-Ham_RADIO@...
Subject: Re: [Raspberry_Pi_4-Ham_RADIO] Adafruit's own linux flavor Occidentalis
 
Excellent, thanks for the info, much appreciated. 
After you got it going, how did it look compared to raspian wheezy distro?
Did you try to use a wifi dongle?
Ke6anm



On Sep 12, 2012, at 2:50 PM, "The Silver Fox" <alan.r.hill@...> wrote:
 
HDMI is not enabled in RPI configuration file.  I got it to work by uncommenting the HDMI settings.
73,
Alan – W6ARH
From: Raspberry_Pi_4-Ham_RADIO@... [mailto:Raspberry_Pi_4-Ham_RADIO@...] On Behalf OfPerry Chamberlain
Sent: Wednesday, September 12, 2012 1:51 PM
To: Raspberry_Pi_4-Ham_RADIO@...
Subject: Re: [Raspberry_Pi_4-Ham_RADIO] Adafruit's own linux flavor Occidentalis
 
I didnt notice you wrote you saw the leds cycling, on and off. The connection may be an issue, to the tv.
My first connection, to a vga monitor through a vga adapter to the rca video out recepticle, had terrible resoution,  480 at best. Big blocky fuzzy fonts etc.
 My second attempt to my new  46 inch hd tv through the hdmi, was dead, no image o the tv.
I disconneted the tv and reconnect to the hdmi outlet that was connected to the  blueray player worked great, with fantastic resolution. It turned out, this is the secound tv that had 1or more hdi out lets that didt work, from the factory.
Check out the adafruit forum.
ke6anm


On Sep 11, 2012, at 9:15 PM, "The Silver Fox" <alan.r.hill@...> wrote:
 
I downloaded it and wrote the image to my SD card.  When I plugged it into the TV I get no output from the RPI.  The lights on the board are cycling as they do when I load other images so I think the OS is running.  Nothing I can do with it without HDMI display.
73,
Alan – W6ARH
From: Raspberry_Pi_4-Ham_RADIO@... [mailto:Raspberry_Pi_4-Ham_RADIO@...]On Behalf Of perryc
Sent: Tuesday, September 11, 2012 11:51 AM
To: Raspberry_Pi_4-Ham_RADIO@...
Subject: [Raspberry_Pi_4-Ham_RADIO] Adafruit's own linux flavor Occidentalis
 
Adafruit has a altered version of wheezy, called occidentalis ( latin for black raspberry).
It gives wifi dongle drivers, etc and scripts to use i2c and other hardware, sensor devices that can connect to her selection of raspberrry pi sheilds and accesories.
Check them out at Adafruit.com.
Pretty neat site.





13201 - 13220 of 13331