So I finally managed to get the system to
load the image correctly.
Everything expanded out just as it should.
That looks good.
However, there is no DNS working
successfully on a hard wired configuration, and no wifi option
even available as well.
Not sure why it’s not just using the
default linux features where all this just works as it
should. Is this disabled on purpose?
Anyone come up with a solution for this?
Of course you can edit the resolv.conf file
to force it to work, until the next reboot, but that’s a
temporary bandaid, not a solution at best.
I have tried it at least 4 times now myself
on a RPI4 with nothing but a blank screen afterwards myself.
So I suspect it could be something with my
version of the 4gig rpi4.
I tried it on a 3b a couple times, at it
will at least try to expand out there, but then starts bombing
out with tons of errors. Then lots of authentication errors.
So no joy for me either. ☹
On Behalf Of Gary Auchard
Sent: Thursday, December 12, 2019 3:19 PM
Subject: [RaspberryPi-4-HamRadio] W3DJS Raspberry Pi
Ham Radio Image v2.0 Released - INOP
I have tried twice now to download the W3DJS
Raspberry Pi Ham Radio Image v2.0 Released program
and make it work. I downloaded the v2.0.tar.bz2 version and
then unzipped the file to make it a 17Gig size file. I copied
that to a 32 Gig MicroSD and loaded it in a Raspberry Pi 4b
and nothing happens.
My understand is this 17 Gig image file that is created is
supposed to set itself up when you power on the Raspberry Pi4b
and run. Am I wrong in that assumption? I've downloaded this
file twice now on a limited data throughput device and can't
keep doing this as I'll run out of data for the month.
What am I doing wrong and how can I make this image work?
Gary A. - W0MNA