Re: pi9k6 Winlink Pat ARDOP

Fred Cunha
 

I am so close… Thank You for all your assistance John!

I am using the beta 3-27 version of pilinbpq.

The radio now ‘keys-up' several times while trying to connect using Pat GUI but not with Command Line. It will however only allow one attempt, then I have to reboot to get it to retry it again. 

Pat HTTP:
2019/04/03 20:46:06 Connecting to K6SDR (telnet)...
2019/04/03 20:46:06 Connected to 127.0.0.1:8772 (tcp)
*** Failure with K6FVC-11

Telnet Log:
03/04/2019 20:46:06 1 127.0.0.1 User=K6FVC
03/04/2019 20:46:06 1 127.0.0.1 Password=CMSTelnet$4$k6fvc-11
03/04/2019 20:46:06 1 127.0.0.1 Gateway Connect Call=K6FVC Command=ATT 4 k6fvc-11

Pat GUI screen:



COMMAND LINE:
2019/04/03 20:56:29 Connecting to K6SDR (telnet)...
2019/04/03 20:56:29 Connected to 127.0.0.1:8772 (tcp)
No CMS connection available - using local BPQMail
ALIAS:K6FVC-7} Invalid command - Enter ? for command list
this is where it hangs….

Telnet Log:
03/04/2019 20:56:29 1 127.0.0.1 User=k6fvc
03/04/2019 20:56:29 1 127.0.0.1 Password=CMSTelnet-11
03/04/2019 20:56:29 1 127.0.0.1 Call Accepted Callsign =k6fvc

Command Line hang - AFTER REBOOT Telnet Log:
03/04/2019 21:01:07 1 Disconnected. Bytes Sent = 58 Bytes Received 19


On Apr 3, 2019, at 3:36 PM, Fred Cunha via Groups.Io <fvcjca@...> wrote:

Hmmm... From the last try here are the log entries... Looks like its working but reporting something else???

03/04/2019 13:03:23 1 127.0.0.1 User=k6fvc
03/04/2019 13:03:23 1 127.0.0.1 Password=CMSTelnet-11
03/04/2019 13:03:23 1 127.0.0.1 Call Accepted Callsign =k6fvc
03/04/2019 13:04:28 2 127.0.0.1 User=K6FVC
03/04/2019 13:04:28 2 127.0.0.1 Password=CMSTelnet$4$k6fvc-11
03/04/2019 13:04:28 2 127.0.0.1 Gateway Connect Call=K6FVC Command=ATT 4 k6fvc-11
03/04/2019 13:08:21 1 Disconnected. Bytes Sent = 58 Bytes Received 19
03/04/2019 13:08:22 2 Disconnected. Bytes Sent = 26 Bytes Received 27
03/04/2019 13:09:46 1 127.0.0.1 User=k6fvc
03/04/2019 13:09:46 1 127.0.0.1 Password=CMSTelnet-11
03/04/2019 13:09:46 1 127.0.0.1 Call Accepted Callsign =k6fvc
03/04/2019 13:09:52 1 Disconnected. Bytes Sent = 58 Bytes Received 19

On Wed, Apr 3, 2019 at 2:16 PM John Wiseman <john.wiseman@...> wrote:
Odd,

I copied your command onto my system, just changing the IP address to point
to my pi, and got through to the node and tried to connect.

D:\pat\pat connect telnet://k6fvc:CMSTelnet$4$k6fvc-11@....0.1:8772/wl2k
2019/04/03
21:47:18 Connecting to WL2K (telnet)...
2019/04/03 21:47:18 Connected to 10.8.0.1:8772 (tcp)
POGO4:G8BPQ-9} Failure with K6FVC-11
2019/04/03 21:49:16 Got interrupt, disconnecting...
2019/04/03 21:49:16 Exchange failed: unexpected EOF

Could you send me your Telnet log (Telnet_20190403.log)?

Thanks,
John



________________________________________
From: RaspberryPi-4-HamRadio@groups.io
[mailto:RaspberryPi-4-HamRadio@groups.io] On Behalf Of Fred Cunha
Sent: 03 April 2019 21:08
To: RaspberryPi-4-HamRadio@groups.io
Subject: Re: [RaspberryPi-4-HamRadio] pi9k6 Winlink Pat ARDOP

Using the 032719 Beta Version of pilinbpq


Command Line:
pi@raspberrypi2:~ $ pat connect
telnet://k6fvc:CMSTelnet$4$k6fvc-11@....0.1:8772/wl2k 
2019/04/03 13:03:23 Connecting to WL2K (telnet)...
2019/04/03 13:03:23 Connected to 127.0.0.1:8772 (tcp)
No CMS connection available - using local BPQMail
ALIAS:K6FVC-7} Invalid command - Enter ? for command list


GUI:
2019/04/03 13:04:28 Connecting to WL2K (telnet)...
2019/04/03 13:04:28 Connected to 127.0.0.1:8772 (tcp)
*** Failure with K6FVC-11




On Apr 3, 2019, at 12:18 PM, Fred Cunha via Groups.Io
<fvcjca=gmail.com@groups.io> wrote:

Thank You John. 

both versions same results 


On Apr 3, 2019, at 11:58 AM, Fred Cunha via Groups.Io
<fvcjca=gmail.com@groups.io> wrote:

actually 

2019-03-27 20:08 
3.4M

On Apr 3, 2019, at 11:45 AM, Fred Cunha via Groups.Io
<fvcjca=gmail.com@groups.io> wrote:

2019-01-06 14:39 
3.3M

On Apr 3, 2019, at 8:30 AM, John Wiseman <john.wiseman@...> wrote:

Looks like the $port$call construct isn’t being recognised. What version of
LinBPQ are you running? The PAT gateway feature isn’t in the released
version, only in the beta.

73,
John

________________________________________
From: RaspberryPi-4-HamRadio@groups.io
[mailto:RaspberryPi-4-HamRadio@groups.io] On Behalf Of fvcjca@...
Sent: 03 April 2019 15:48
To: RaspberryPi-4-HamRadio@groups.io
Subject: Re: [RaspberryPi-4-HamRadio] pi9k6 Winlink Pat ARDOP

PROGRESS!

Here's the latest;

pi@raspberrypi2:~ $ pat connect
telnet://k6fvc:CMSTelnet$4$k6fvc-11@....0.1:8772/wl2k 
2019/04/03 07:42:42 Connecting to WL2K (telnet)...
2019/04/03 07:42:42 Connected to 127.0.0.1:8772 (tcp)
No CMS connection available - using local BPQMail
ALIAS:K6FVC-7} Invalid command - Enter ? for command list


My Telnet Section of bpq32.cfg
; ********************PORT 3  TELNET **************************************
;3
PORT
 ID=Telnet Server
 DRIVER=Telnet
 CONFIG
    LOGGING=1
    DisconnectOnClose=0     ;  1 = closes window when you bye
    TCPPORT=8010
    FBBPORT=8011
    HTTPPORT=8080
    LOGINPROMPT=user:
    PASSWORDPROMPT=password:
    MAXSESSIONS=10
    RELAYAPPL=BBS
    CMS=1
    CMSCALL=K6FVC-11       ; CMS Access K6FVC (with SSID if used)
    CMSPASS=password     ; WL2K sysop password
    FALLBACKTORELAY=1    ; will try to get to RMS RELAY if CMS unavaiable
    RELAYHOST=192.168.1.21  ; put the name or ip number of your RMS_RELAY
here
    CTEXT=Welcome to K6FVC Telnet Server\n Enter ? for list of commands\n\n
    USER=k6fvc,password,K6FVC1,,SYSOP
   ; USER=username2,password2,K6FVC2,,
; add as many as you like
ENDPORT













Join RaspberryPi-4-HamRadio@groups.io to automatically receive all group messages.