Re: pi9k6 Winlink Pat ARDOP

Fred Cunha
 

Leaving off the freq part and deleting the rig info from the pat config, this is what I get...
plain telnet works OK... It's my 'telardop' which is the 'special' telnet

pi@raspberrypi2:~ $ pat connect telnet
2019/04/02 15:06:32 Connecting to WL2K (telnet)...
2019/04/02 15:06:33 Connected to 52.4.206.229:8772 (tcp)
[WL2K-5.0-B2FWIHJM$]
;PQ: 34048209
CMS>
>FF
FQ
2019/04/02 15:06:33 Disconnected.
pi@raspberrypi2:~ $ pat connect telardop
2019/04/02 15:06:41 Invalid or missing target callsign
pi@raspberrypi2:~ $ pat connect telnet:///K7GJT
2019/04/02 15:07:28 Connecting to K7GJT (telnet)...
2019/04/02 15:07:28 Unable to establish connection to remote: dial tcp: missing address

PAT CONFIG:
...
  "connect_aliases": {
    "telnet": "telnet://{mycall}:CMSTelnet@...:8772/wl2k",
    "telardop": "telnet://{mycall}:CMSTelnet$4$K7GJT@....64:8772"
    Where is this IP address set at from above???
...
"telardop": {
    "listen_addr": ":8774",
    "password": ""
...

MUCH THANKS!

Join RaspberryPi-4-HamRadio@groups.io to automatically receive all group messages.