Re: pi9k6 Winlink Pat ARDOP

John Wiseman
 

Try setting the radio frequency manually and leaving off the freq? bit. The
gateway interface doesn’t support sending commands to the radio.

73,
John G8BPQ

________________________________________
From: RaspberryPi-4-HamRadio@groups.io
[mailto:RaspberryPi-4-HamRadio@groups.io] On Behalf Of fvcjca@...
Sent: 02 April 2019 21:02
To: RaspberryPi-4-HamRadio@groups.io
Subject: Re: [RaspberryPi-4-HamRadio] pi9k6 Winlink Pat ARDOP

Thanks for the help!

So here is where I am at...
pat connect telardop:///LA5NTA?freq=708000
2019/04/02 12:58:30 ft847 ready. Dial frequency is 145.390.00 MHz.
2019/04/02 12:58:30 Unable to QSY: Not supported with transport 'telardop'

pat configure...
  "connect_aliases": {
    "telnet": "telnet://{mycall}:CMSTelnet@...:8772/wl2k",
    "telardop": "telnet://{mycall}:CMSTelnet$4$k6fvc@....64:8772"
...

linbpq ...
Initialising Port 04     ARDOP Serial /dev/serial0

Join RaspberryPi-4-HamRadio@groups.io to automatically receive all group messages.