Re: pi9k6 Winlink Pat ARDOP

Fred Cunha
 

I plan on publish my steps soon... I just need to resolve this one issue... Here is were I am at now...


What I want to do is;
 
email <-> HF RADIO <-> WINLINK System
 
I want to eliminated the internet on my side. 
 
I tried following the instructions for using LinBPQ as a Gateway for PAT (http://www.cantab.net/users/john.wiseman/Documents/PATSuppport.html), but fail to get a connection due to an error from PAT: "2019/04/02 06:47:15 ARDOP TNC initialization failed: dial tcp: lookup CMSTelnet$11$K6FVC@....21: no such host:"
 
My PAT ARDOP Config;
  "ardop": {
   "addr": "CMSTelnet$11$K6FVC@....64:8772",
    "arq_bandwidth":{ 
      "Forced": false,
      "Max": 500
    },
    "rig": "ft847",
    "ptt_ctrl": false,
    "beacon_interval": 0,
    "cwid_enabled": true
  },
 
 
I think I am missing a definition in the bpq32.conf. Here is my telnet section:
PORT
 ID=Telnet Server
 DRIVER=Telnet
 CONFIG
    LOGGING=1
    DisconnectOnClose=0     ;  1 = closes window when you bye
    TCPPORT=8010
    FBBPORT=8011
    HTTPPORT=8080
    LOGINPROMPT=user:
    PASSWORDPROMPT=password:
    MAXSESSIONS=10
    CMS=1
    CMSCALL=K6FVC-11       ; CMS Access K6FVC (with SSID if used)
    CMSPASS=      ; WL2K sysop password
    FALLBACKTORELAY=1    ; will try to get to RMS RELAY if CMS unavaiable
    RELAYHOST=192.168.1.21  ; put the name or ip number of your RMS_RELAY here
    CTEXT=Welcome to K6FVC Telnet Server\n Enter ? for list of commands\n\n
    USER=k6fvc,password,K6FVC1,,SYSOP

Join RaspberryPi-4-HamRadio@groups.io to automatically receive all group messages.