1. RaspberryPi-4-HamRadio@groups.io

Re: Pi E-mail to Use ARDOP/ARDOP2 CORRECTED

Jerome Kutche
 

I do not have any notes.. But if you look at the last several ports you will see I have 5 ARDOP Ports…

Two are ARDOP version 1 Ports 2 are ARDOP Version 2 ports the last one if on VHF and experimental.

I am out all day today but by Friday or the weekend I am available by phone….  73 jerry N9LYA

 

https://packet-radio.net/2018/09/complex-bpq32-cfg-from-n9lya/

 

 

 

 

From: RaspberryPi-4-HamRadio@groups.io <RaspberryPi-4-HamRadio@groups.io> On Behalf Of Ed Bloom, KD9FRQ
Sent: Wednesday, November 7, 2018 8:18 PM
To: RaspberryPi-4-HamRadio@groups.io
Subject: Re: [RaspberryPi-4-HamRadio] Pi E-mail to Use ARDOP/ARDOP2 CORRECTED

 

Please share a bpq.cfg file and notes on what to edit so i can get this up and running with ARDOP/ARDOP2 and HF (target is 20m)

 

On 11/7/2018 5:16 AM, Jerome Kutche wrote:

I use PiLinBPQ.. Nice… Not hard to set up with the instructions and some patients.. Well worth it..

 

 

 

From: RaspberryPi-4-HamRadio@groups.io <RaspberryPi-4-HamRadio@groups.io> On Behalf Of Ed Bloom, KD9FRQ
Sent: Tuesday, November 6, 2018 9:04 PM
To: RaspberryPi-4-HamRadio@groups.io
Subject: Re: [RaspberryPi-4-HamRadio] Pi E-mail to Use ARDOP/ARDOP2 CORRECTED

 

So, now that  I have the ARDOP and ARDOP2 compiled (loaded ARDOP2) and loaded on the TNC-Pi9k6..

 

What software is needed to send e-mails with a Radiogram or other form as it sits on the Pi?

 

Are they any pre-configured R Pi IMG files out there that only require a few edits to a config file

to enter my Call Sign, grid, etc... similar to that of the PiGate system?

73s, Ed - KD9FRQ

 

 
Join RaspberryPi-4-HamRadio@groups.io to automatically receive all group messages.