Re: TNC PI 9k6 RX problem at 9600


César Regalado León <ea8cxn@...>
 

Hello, sorry for the delay.

The answer is YES, I use the cable that I request together with the TNC PI , the 6 pin mini din. Also the Jumper is set in the correct position for 9600.

Also I made a cable solded to the TNC PI board, just to check if the problem is on the connector.

The DCD led flash but not only when there is a packet, it flash sometimes when there is no packets.

I read that some people have problems to transmit with this kind of equipment, but for me, the TX at 9600 is working perfect, the problem is the RX.

Thank you

Join RaspberryPi-4-HamRadio@groups.io to automatically receive all group messages.