Brian,toggle quoted messageShow quoted text
The links to the software are out of date. You should follow the instructions at the referenced document (http://www.cantab.net/users/john.wiseman/Documents/InstallingLINBPQ.htm) for installation.
The configuration stuff is mostly ok, but you no longer need to create symlinks for the serial port(s) to your TNC(s). You can just put, for example, COMPORT=/dev/ttyUSB0 in the configuration.
If you are using a KISS TNC such as the TNC-PI the stuff about testing the TNC and putting into KISS won't apply.
On 03/09/2018 06:41, Brian Clark wrote: