Re: Pilinbpq

John G8BPQ


The links to the software are out of date. You should follow the instructions at the referenced document ( for installation.

The configuration stuff is mostly ok, but you no longer need to create symlinks for the serial port(s) to your TNC(s). You can just put, for example, COMPORT=/dev/ttyUSB0 in the configuration.

If you are using a KISS TNC such as the TNC-PI the stuff about testing the TNC and putting into KISS won't apply.


On 03/09/2018 06:41, Brian Clark wrote:
Question for John Weisman

Hi John,

Do the steps in this guide still hold true for installing and configuring Pilinbpq?



Join to automatically receive all group messages.