Re: Pi TNC to Motorola Radio


Kevin Reeve
 

Thanks,

 

Radio in wideband mode but most likely feeding the flat audio in pin. 

Kevin

 

 

From: <RaspberryPi-4-HamRadio@groups.io> on behalf of "Teton Amateur Radio Repeater Association (TARRA)" <tarra@...>
Reply-To: "RaspberryPi-4-HamRadio@groups.io" <RaspberryPi-4-HamRadio@groups.io>
Date: Thursday, August 30, 2018 at 11:45 AM
To: "RaspberryPi-4-HamRadio@groups.io" <RaspberryPi-4-HamRadio@groups.io>
Subject: Re: [RaspberryPi-4-HamRadio] Pi TNC to Motorola Radio

 

It wouldn't be the first time I did something upside down or backwards : )

Mick - W7CAT

----- Original Message -----
From: "Willem Schreuder"
To: RaspberryPi-4-HamRadio@groups.io
Sent: Thursday, August 30, 2018 11:34:14 AM
Subject: Re: [RaspberryPi-4-HamRadio] Pi TNC to Motorola Radio

> On Thu, 30 Aug 2018, Teton Amateur Radio Repeater Association (TARRA) wrote:
>
> > You have your pins wrong.
> > Pin 2 is mic in and pin 5 is Flat TX audio in.
>
> Oops, sorry you are right (I was looking at it upside down).
>
> With that correction, the point is still to feed via the mic, not
> line/flat.
>
> ================================================================
> Dr. Willem A. Schreuder, President, Principia Mathematica
> Address: 445 Union Blvd, Suite 230, Lakewood, CO 80228, USA
> Tel: (303) 716-3573 Fax: (303) 716-3575
> WWW: www.prinmath.com Email: Willem.Schreuder@...
>
>
>
>

--

Be sure to check out all the latest at our web site!

Join RaspberryPi-4-HamRadio@groups.io to automatically receive all group messages.