Re: Testing TNC-pi


Jim WB9QPM
 

Hi Bob,

If you only want to test the PTT LED, I would open a browser and put the IP number and port. 
(http://192.168.1.10:8008) Click on ports. Click on the beacon link to the port you want to test. Click test button. Watch the LED blink. 

You will also need the HTML directory and files present. The directory is all caps.

This can be done on the PI or thru ethernet on the same sub net.

If the test is good, you also know that BPQ is talking to the TNC.

I hope this helps. I haven't used it for a spell and memory is not as good as it was.

Take care,
Jim WB9QPM



On Sep 17, 2017, at 3:07, bob@... [Raspberry_Pi_4-Ham_RADIO] <Raspberry_Pi_4-Ham_RADIO@...> wrote:

Hi Tadd, This setup was on the bench with out radio connected.


Join RaspberryPi-4-HamRadio@groups.io to automatically receive all group messages.