Re: Some progress

Kutche, Jerry (Mitchell) USA <JKutche@...>

You can reload the OS over and over and over if need be... Simply use something like Win32 Disk Imager.

Jerry Kutche
Electrical Supervisor

Lehigh Cement Company LLC
180 N. Meridian Road
Mitchell, IN  47446
Phone:  (812) 849-2191 ext. 251
Fax:  (812) 849-5007
Cell: (812) 583-0445

This e-mail may contain confidential and/or legally privileged information.  If you are not the intended recipient (or have received this e-mail in error) please notify the sender immediately and delete this e-mail.  Any unauthorized copying, disclosure or distribution of the material in this e-mail is strictly forbidden.


From: Raspberry_Pi_4-Ham_RADIO@... [mailto:Raspberry_Pi_4-Ham_RADIO@...] On Behalf Of J FLETCHER
Sent: Friday, August 24, 2012 3:55 AM
To: Raspberry_Pi_4-Ham_RADIO@...
Subject: RE: [Raspberry_Pi_4-Ham_RADIO] Some progress


Hello John,
Thanks very much for the explanation. I'm not sure whether I can overwrite what's on the card with a new installation of the OS, or whether I should load Linux into an old PC to get at it that way, or just buy another SD card. Last option is quick but not very educational. I'm a Linux novice and not finding it at all intuitive. Can you recommend any literature?
I'm interested in your packet node project. I have a KPC3 (bought new) and a KAM (bought at a rally for £25 - bargain!) but never got into packet radio when it was new, which I now regret. I have VHF radios and laptops to spare, so I ought to try again.
That's a long-established callsign. 1970? Mine dates from June 75.
John G4EDX in Woodthorpe

--- On Fri, 24/8/12, John Wiseman wrote:

From: John Wiseman
Subject: RE: [Raspberry_Pi_4-Ham_RADIO] Some progress
To: Raspberry_Pi_4-Ham_RADIO@...
Date: Friday, 24 August, 2012, 8:12




The default user/password for the standard PI distributions (wheezy and raspbian) are pi/raspberry. You can’t log in as root, unless you set a root password, via sudo passwd. Sudo doesn’t need a password.


The SD card has a small boot partition, formatted as a FAT partition, so can be seen by windows. The rest is ext4, which windows can’t see, So a freshly loaded image appears to windows as around 55 MB. When first booted, it will only use the first 2 GB. The first time you log in it should run a utility raspi-config, which allows you to resize the root partition to fill the card.

My main interest is in using the pi as a packet node. The prototype TNC is shown on the front page of this group. This is a standard TNC-X, with a bit of stripboard superglued to the edge to carry a 26 way connector. I’ve designed a board with the connector on board, and the same size as the pi. I’m waiting for the boards to come back from the PCB factory. The board is stackable, so more than one TNC can be connected, and uses the i2c bus to communicate with the pi.

From another John in Nottingham ,

73, John G8BPQ

From: Raspberry_Pi_4-Ham_RADIO@... [mailto:Raspberry_Pi_4-Ham_RADIO@...] On Behalf Of J FLETCHER
Sent: 24 August 2012 07:57
To: Raspberry_Pi_4-Ham_RADIO@...
Subject: [Raspberry_Pi_4-Ham_RADIO] Some progress


Hi again,
Having somehow locked myself out of the second OS installation (it's demanding a password, which I didn't set) I decided to format the 8Gb card and reinstall the OS. My laptop now reports that it's a 55.8Mb card. Any suggestions?

My box of bits arrived yesterday. The HDMI-to-VGA converter works a treat. I can read all the text on the computer's monitor (when it's not moving too quickly) and have a full view of the games screens.
The 26-way connectors and cable arrived too, so I can start making leads for the P1 GPIO header. First job; flash an LED. Second job; flash it in Morse!

Join to automatically receive all group messages.