Re: PI on packet radio - need script help


n6ws
 

Yes, select Connection Type Serial, and then put the dev info '/dev/ttyAMA0' in the Serial Line box.

On 11/17/2012 02:47 PM, kc2eq wrote:
 

Bill, thanks for the information. Does PUTTY allow you to set ports and other parameters after it starts?

--- In Raspberry_Pi_4-Ham_RADIO@..., Bill Shell wrote:
>
> John,
>
> PuTTY is available for the RPi.
> sudo apt-get install putty
>
> 73, Bill
> N6WS
>
> On 11/17/2012 05:55 AM, kc2eq wrote:
> >
> > I have my PI running on packet radio just fine thru an external
> > rs232/UART PCB.
> > I am using MiniCom and have to type a string of variables when I start
> > the program.
> > I would like to generate a script file (?) where I could issue a
> > single keyword like "Packet" and have it start MiniCom with its
> > variables . I have a basic understanding of IDLE and Python but I need
> > a raw beginners (exact Syntax) to make a script file to work. I don't
> > care if the final product that has to be used in xterm or from the GUI.
> > The string I am trying in to get into an executable is:
> >
> > MiniCom -b 1200 -o -D /dev/ttyAMA0
> >
> > I have tried to find a GUI based terminal program that allows one to
> > enter set up data after starting but no success there. (Putty, cutecom
> > , microcom)
> >
> > Any help would be greatly appreciated
> >
> > John/KC2E
> >
> >
>


Join RaspberryPi-4-HamRadio@groups.io to automatically receive all group messages.