toggle quoted messageShow quoted text
Don't trust the voltage display on those. Several people on our reef-pi forums for aquarium controllers set the display to 5v, then powered up the pi with it and smoked the pi... One was putting 12v out when the display showed 5v
On Sep 24, 2020, at 07:14, "Tadd KA2DEW in NC via groups.io
A Raspberry PI 4B can only accept 3 amps on it’s USB-C connector. It does desire 5.1V though, not 5V.
It’s tricky finding a 5.1V USB source that isn’t 110VAC powered.
I have been using a switcher supply made by DROKing in the far east.
This is a $15 or so device which has a multi-turn pot to set the output voltage and accepts a wide range of DC voltage on the input.
A key feature is that when main power is turned on, the unit immediately outputs the desired voltage to the USB connector. Some of the variable output USB converter items power on with the USB output disabled.
The bug with this particular unit is that it appears that DROKing has discontinued it in favor of a menu driven device (at the same price) but which powers on with the USB output disabled. However, the unit continues to be available in various places including Amazon. However, for a while the ISBN number kept changing and so any link to the offering seemed temporary. That sounds like somebody is cloning the device and it isn’t DROKing anymore. Dunno. Maybe DROKing changed their minds when the Internet blew up after they discontinued it?
I haven’t had any particular noise on HF from this, though I live in a suburb and have plenty of noise already. YMMV.
Tadd / KA2DEW
Raleigh NC FM05pv
I think a 7805 puts out 1.5 amps his device puts out 15. Does he need 15 amps?
If you have enough power... Use an7805
That sure is quiet even if it wastes some power in heat...
Sure its possible to make a switcher quiet... Meanwell psu are really good... But for shortwave i would additionally add some filters and ferrites.. If a switcher used...
Or use 7805... Grin
Greetz dg9bfc sigi