Re: Configuring W3DJS V1.0 Direwolf questions.

Dennis Blanchard

Thanks for jumping in to help David. Here are some data dumps from the RPI:
Direwolf startup dialog:
Dire Wolf DEVELOPMENT version 1.6 G (Jun 18 2020)
Includes optional support for:  gpsd hamlib cm108-ptt
Reading config file direwolf.conf
Audio device for both receive and transmit: plughw:1,0  (channel 0)
Channel 0: 1200 baud, AFSK 1200 & 2200 Hz, E+, 44100 sample rate / 3.
Ready to accept AGW client application 0 on port 8000 ...
Ready to accept KISS TCP client application 0 on port 8001 ...
Attached to AGW client application 0...
Ready to accept AGW client application 1 on port 8000 ...
Hamlib Error: rig_set_ptt command for channel 0 PTT
Communication timed out
[0L] K1YPP>APJYC1,WIDE1-1,WIDE2-1:=2726.00N/08251.06W# K1YPP testing  station<0x0d>
Hamlib Error: rig_set_ptt command for channel 0 PTT
Communication timed out
Yes, I had already set up: sudo usermod -G dialout k1ypp
The only error message I see is the one I originally posted.
In Fldigi I use the Rigcat or Hamlib configs, either works. They use /dev/ttyUSB0 device, which is the Yaesu CAT-62 cable.
I was aware that Direwolf uses it's own hamlib. If I do a list of rigs (rigctl --list):
  1020  Yaesu    FT-817            20200616.0      Stable      RIG_MODEL_FT817
  1021  Yaesu    FT-100            20200323.0      Beta        RIG_MODEL_FT100
  1022  Yaesu    FT-857            20200323.0      Stable      RIG_MODEL_FT857
  1023  Yaesu    FT-897            20200607.0      Stable      RIG_MODEL_FT897
W3DJL builds the whole ham package into one .iso build and I burned an SD card with it. It is built with hamlib, WSJT-X, Fligi, etc. I haven't been able to figure out exactly where it keeps the hamlib data. Somehow, it must not be using the hamlib data correctly, but I don't understand how.

Anyway, I'll keep trying. I can't believe that I am the only one that has run into this.

Dennis, K1YPP

Join to automatically receive all group messages.